Level 3 ICT systems and network management ( )

Similar documents
Level 3 Install, configure and integrate networked hardware and software ( )

Level 2 Install, configure and test ICT networks (7266/ / )

Level 2 Install and Configure Equipment and Operating Systems ( )

Level 2 Install and configure ICT equipment and operating systems ( )

Level 3 Web fundamentals ( )

Level 2 Creating a procedural program using COBOL ( )

Level 2 Select and use IT 2 ( )

Level 2 Creating an event driven computer program using Java ( )

Level 3 Designing and creating advanced websites ( )

Level 2 Networking Principles ( )

Level 2 Networking Principles ( )

Level 1 Dismantle, assemble, install and maintain a desktop computing system (7266/7267/ )

Level 1 Dismantle, assemble, install and maintain a desktop computing system (7266/7267/ )

Level 3 Develop software using Java (7266/ )

Level 3 Creating an object oriented computer program using Java ( / )

Level 3 Network management and security ( )

Level 3 Network management and security ( )

Level 3 Website software ( )

Level 2 Security for IT Users ( )

Level 2 Install, configure and test ICT networks ( )

Level 2 Create software components using Java (7266/ )

Level 3 Implementing an ICT systems security policy ( / )

Level 3 Voice and data communications ( )

Level 2 Set up an IT system (SIS )

Level 2 Creating an event driven computer program using Java ( )

Level 2 Security for IT users (ITS ) ITQ (QCF) Assignment guide for Candidates Assignment A. March 2010 Version 1.

Level 3 Software design fundamentals ( / )

Level 1 Multimedia Software (MM )

Level 3 Design and maintain ICT networks software components ( )

Level 2 Networking, telephony and VoIP for the digital home technology integrator ( )

Level 1Using mobile IT devices (UMD )

Level 2 Control and security systems for the digital home technology integrator ( )

Level 2 Digital Home Technology Integrator ( )

Level 2 Designing and creating multimedia presentations (7266/ )

Level 3 Creating an event driven computer program using Visual Basic.NET ( / )

Level 3 Creating an event driven computer program using Visual Basic ( / )

Level 3 Install, configure and upgrade ICT software ( / )

Level 2 FS IT user fundamentals (IUFFS )

Level 3 Voice and data communications ( )

Level 3 Principles of ICT Systems and Data Security ( / )

Level 2 Audio/video installation for the digital home technology integrator ( )

Level 1 IT user fundamentals (IUF:FS )

January 2010 Version 9.0

Level 3 Design and maintain ICT network software components ( )

Level 3 Design software ( )

Level 3 Install, configure and integrate networked hardware and software ( )

Level 3 Develop software using C# (7266/ )

Level 1 Internet Safety for IT Users ( )

Level 3 Develop software using Visual Basic.NET (7266/ )

Level 1 Using the Internet for finding and sending information (7266/ )

Level 3 Using the Internet (INT )

Level 1 IT user fundamentals (IUF:FS )

Level 1 Creating simple web pages (7266/ )

Level 1 Internet Safety for IT Users ( )

Level 1 Using the Internet for finding and sending information (7266/ )

Level 2 Creating an event driven computer program using Visual Basic.NET ( )

Level 2 Creating an event driven computer program using VisualBasic.Net ( )

Level 2 Create software components using Visual Basic.NET ( )

Level 3 Design Software ( )

Level 2 Data management software (DMS )

Level 2 Designing and creating databases (7266/ )

Level 2 Creating an event driven computer program using Visual Basic ( )

Level 1 Design software (DIS )

Level 3 Multimedia software (MM )

Level 1 Producing simple databases (7266/ )

Level 1 Design software (DIS )

Systems and Principles Unit Syllabus

Level 1 Desktop publishing software (DTP )

Level 3 Database software ( )

Level 1 Working with desktop publishing applications (7266/ )

Level 3 Desktop publishing software (DTP )

Level 3 Data management software (DMS )

Level 3 Database Software ( )

Level 2 Creating an event driven computer program using C# ( )

Level 3 Using collaborative technologies (UCT )

Level 2 Creating an event driven computer program using C# ( )

Level 3 Word processing software ( )

Level 3 Multimedia Software (MM )

Level 2 IT software fundamentals (ISF:FS )

Level 2 Create Software Components Using C# (7266/ )

Level 2 Website software (WS )

Level 3 Using (EML )

Level 2 Designing and creating multi-page websites (7266/ )

Level 2 Designing and creating documents using desktop publishing software (7266/ ) e-quals Assignment guide for Candidates Assignment C

Level 3 Word processing software (WP )

Level 1 Creating simple presentations (7266/ )

Systems and Principles Unit Syllabus

Level 1 Producing simple word processed documents (7266/ )

Level 2 Combining word processing, spreadsheet and database applications to present information (7266/ )

Level 3 Integrating applications to create advanced presentations (7266/ )

Systems and Principles Unit Syllabus

Level 1 Creating presentations using word processing, spreadsheet and presentation software (7266/ )

Level 2 Designing and creating databases (7266/ )

Level 2 Desktop publishing software (DTP )

Level 2 Using word processing software to adapt and merge documents (7266/ )

Systems and Principles Unit Syllabus

Systems and Principles Unit Syllabus

Level 3 Software design fundamentals ( / )

Level 2 Using word processing software to adapt and merge documents (7266/ )

Level 3 Designing and creating relational databases (7266/ ) e-quals

Transcription:

Level 3 ICT systems and network management (7540-368) Systems and Principles Assignment guide for Candidates Assignment C (This assignment can be used as evidence of achievement of 7540-031 Level 3 Networking Principles) www.cityandguilds.com September 2017 Version 3.0

About City & Guilds City & Guilds is the UK s leading provider of vocational qualifications, offering over 500 awards across a wide range of industries, and progressing from entry level to the highest levels of professional achievement. With over 8500 centres in 100 countries, City & Guilds is recognised by employers worldwide for providing qualifications that offer proof of the skills they need to get the job done. City & Guilds Group The City & Guilds Group includes City & Guilds, ILM (the Institute of Leadership & Management) which provides management qualifications, learning materials and membership services, NPTC which offers land-based qualifications and membership services, and HAB (the Hospitality Awarding Body). City & Guilds also manages the Engineering Council Examinations on behalf of the Engineering Council. Equal opportunities City & Guilds fully supports the principle of equal opportunities and we are committed to satisfying this principle in all our activities and published material. A copy of our equal opportunities policy statement is available on the City & Guilds website. Copyright The content of this document is, unless otherwise indicated, The City and Guilds of London Institute 2010 and may not be copied, reproduced or distributed without prior written consent. However, approved City & Guilds centres and learners studying for City & Guilds qualifications may photocopy this document free of charge and/or include a locked PDF version of it on centre intranets on the following conditions: centre staff may copy the material only for the purpose of teaching learners working towards a City & Guilds qualification, or for internal administration purposes learners may copy the material only for their own use when working towards a City & Guilds qualification The Standard Copying Conditions on the City & Guilds website also apply. Please note: National Occupational Standards are not The City and Guilds of London Institute. Please check the conditions upon which they may be copied with the relevant Sector Skills Council. Publications City & Guilds publications are available on the City & Guilds website or from our Publications Sales department at the address below or by telephoning +44 (0)20 7294 2850 or faxing +44 (0)20 7294 3387. Every effort has been made to ensure that the information contained in this publication is true and correct at the time of going to press. However, City & Guilds products and services are subject to continuous development and improvement and the right is reserved to change products and services from time to time. City & Guilds cannot accept liability for loss or damage arising from the use of information in this publication. City & Guilds 1 Giltspur Street London EC1A 9DD T +44 (0)20 7294 2800 F +44 (0)20 7294 2400 www.cityandguilds.com learnersupport@cityandguilds.com

Contents Level 3 ICT systems and network management (7540-368) Assignment C Introduction Information for Candidates 2 Candidate Instructions 3 Assignment C Version 3.0 Level 3 ICT systems and network management (7540-368) 1

Level 3 ICT systems and network management (7540-368) Assignment C Introduction Information for Candidates About this document This assignment comprises all of the assessment for Level 3 ICT systems and network management (7540-368). Health and safety You are asked to consider the importance of safe working practices at all times. You are responsible for maintaining the safety of others as well as your own. Anyone behaving in an unsafe fashion will be stopped and a suitable warning given. You will not be allowed to continue with an assignment if you compromise any of the Health and Safety requirements. This may seem rather strict but, apart from the potentially unpleasant consequences, you must acquire the habits required for the workplace. Time allowance The recommended time allowance for this assignment is 4 hours. 2 Assignment C Version 3.0 Level 3 ICT systems and network management (7540-368)

Level 3 ICT systems and network management (7540-368) Candidate Instructions Time allowance: 4 hours Assignment set up: This assignment is made up of three tasks: Task A Reconfigure network switch or router to provide improved performance Task B Write a business report on systems security Task C Write a business report on management technologies Scenario A network that you are managing has started to run slowly. You suspect it may be caused by the way a switch or router has been configured. The network configuration then impacts upon the performance of the end user devices such as PCs when logging onto the systems. You need to look at the supplied network performance data and reconfigure the switch or router to allow for better data throughput and for network monitoring and security. Finally you will need to write a report on system monitoring techniques which can be implemented by the business including issues which may arise if the system is not properly monitored. This will also include a set of recommendations as to how to improve the overall effectiveness of Business ICT within organisations. Read all of the instructions carefully and complete the tasks in the order given. Task A Reconfigure network switch or router to provide improved performance In this task you will be given an item of network hardware and associated performance data. You must examine this data and use your analysis to reconfigure the network hardware. 1 Initiate the actions required to remedy failures of IT systems to meet operational requirements, by finding out the actual configuration of the device. 2 Reconfigure the device to improve the network performance. 3 Monitor the network performance and record the data using a screen print. Continued over Assignment C Version 3.0 Level 3 ICT systems and network management (7540-368) 3

Task B Write a business report on systems security 1 Explain the importance of controlling user access to system resources. 2 Describe three commonly available methods for controlling user access to system resources. 3 Identify five methods and reasons for the prevention of unauthorised access to the network system. Task C Write a business report on management technologies 1 Identify six tools available to monitor the operation and performance of IT systems. 2 Describe six common causes of IT systems failing to meet operational requirements and the actions required to correct these. 3 Describe areas of IT system use that may be inefficient, covering: hardware software use of materials services. 4 Describe six methods of improving the efficiency of hardware and software in a client server LAN. 5 Describe three factors contributing to the feasibility or otherwise of potential improvements. 6 Explain the importance of presenting recommendations in a manner suited to the needs of the audience. When you have finished working: Sign each document above your name and label all removable storage media with your name. Hand all paperwork and removable storage media to your assessor. If the assignment is taken over more than one period, all paperwork and removable media must be returned to the test supervisor at the end of each sitting. End of assignment 4 Assignment C Version 3.0 Level 3 ICT systems and network management (7540-368)

Published by City & Guilds 1 Giltspur Street London EC1A 9DD T +44 (0)20 7294 2468 F +44 (0)20 7294 2400 www.cityandguilds.com City & Guilds is a registered charity established to promote education and training Assignment C Version 3.0 Level 3 ICT systems and network management (7540-368) 5