M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified: July 20, 2009 Part Number Type Mounting Hardware Applications - Table 1 Mini D Ribbon (MDR) Conn. s D Sub Conn. s D Ribbon Conn. s 41-1L 2 Jack Socket Screw X X 41-1S 2 Jack Socket Screw X X 41-2 Jack Socket Screw X 41- Jack Socket Screw X 41-4 2 Jack Socket Screw X X 41-10 Jack Socket Screw X 41-1 Jack Socket Screw X 41-16 Jack Socket Screw X 41-17 Jack Socket Screw X 41-25 Jack Socket Screw X 41-0 Jack Socket Screw X 41-1 Jack Socket Screw X 41-2 Jack Socket Screw X 41-5 Jack Socket Screw X 41-6 Jack Socket Screw X 42-1 2 Jack Screw Kits X 42-2 2 Jack Screw Kits X 42-2 Jack Screw Kits X X 42-4 2 Jack Screw Kits X X 44- Board Lock Screw X 44-4 Board Lock Screw X 44-26 Panel Mount Screw X 44-8 Panel Mount Screw X 44-44 Panel Mount Screw X 44-45 Panel Mount Screw X 475-1 Bail Mount Kits X 475-4 Bail Mount Kits X 475-5 Bail Mount Kits X Shrunk D Ribbon (SDR) Conn. s 12600-S-08 Jack Socket Screw X 12600-S-10 Jack Socket Screw X 12600-S-12 Jack Socket Screw X 44-46 Board Lock Screw X Sheet # Mounting hardware Guide X 9 of 9 -See sheet 7 of 9 for D Ribbon & Plastic Connector accessories.- 2 of 9 of 9 4 of 9 5 of 9 6 of 9 7 of 9 8 of 9 RIA Code RIA E5 & C apply Notes: 1. Use Table 1 as a guide for selecting the correct mounting hardware. 2. See sheet 9 of 9 for selection guide - 9 to 7 and 50 position D Sub connectors.. See Regulatory Information Appendix (RIA) for chemical compliance information. Sheet 1 of 9 http://www.mconnectors.com 800-225-57
M I/O Connector Mounting Options and Hardware Jack Socket Screws 41-1L 2 - Jack Sockets 4 - Spacers 1 [0.79] Thick 2 - Lock Washers 2-4-40 Nuts.1 [7.9] HEX x.15 [.8] Deep 41-1S 2 - Jack Sockets 4 - Spacers 1 [0.79] Thick 2 - Lock Washers 2-4-40 Nuts.1 [7.9].1 [.] HEX x.09 [2.] Deep 41-2 2 - Jack Sockets 2 - Lock Washers 2-4-40 Nuts.0 MIN.4 [10.9] HEX.0 x.26 [6.6] Deep 41- IEEE-488-Type 2 - Jack Sockets 4 - Spacers 1 [0.79] Thick 2 - Lock Washers 2-4-40 Nuts.4 [10.8].9 [10.0].0 Ø.28 [7.1] Finish: Black Oxide Screw / Socket Thread Size: #4-40 / M.5 [4.7].17 [4.] M.5 Thread x.24 [6.1] Deep 41-4 2 - Jack Sockets 4 - Spacers 1 [0.79] Thick 2 - Lock Washers 2-4-40 Nuts.62 [15.8] HEX Screw / Socket Thread Size: #4-40 /#4-40 x.15 [.8] Deep Sheet 2 of 9 http://www.mconnectors.com 800-225-57
M I/O Connector Mounting Options and Hardware 41-10.5 Screw / Socket Thread Size: M2.5 / M2.5.0 x.2 [5.8] Deep 41-1.5 Screw / Socket Thread Size: M2.5 / #4-40.0 x.2 [5.8] Deep 41-16.5 Recommended Max. Torque:.5 inch lbf [0.4 N m].0 x.2 [5.8] Deep 41-17.5 Recommended Max. Torque:.5 inch lbf [0.4 N m].0 x.2 [5.8] Deep 41-25 Screw / Socket Thread Size: M2.5 / M2.41 [10.4].05 [1.].12 [.0] x.12 [.0] Deep Sheet of 9 http://www.mconnectors.com 800-225-57
M I/O Connector Mounting Options and Hardware 41-0.40 [10.2] Recommended Max. Torque:.5 inch lbf [0.4 N m].15 [.8] [4.1] x.10 [2.5] Deep 41-1.40 [10.2] Screw / Socket Thread Size: M2.5 / #4-40.15 [.8] [4.1] x.10 [2.5] Deep 41-2.50 [12.7] Screw / Socket Thread Size: M2.5 / #4-40.0 [4.1] X.20 [5.1] Deep 41-5.70 [17.8] [4.1] Screw / Socket Thread Size: M2.5 / #4-40.0 x.2 [5.8] Deep 41-6.41 [10.4].12 [.0] Screw / Socket Thread Size: M2.5 / M2.5 x.10 [2.5] Deep Sheet 4 of 9 http://www.mconnectors.com 800-225-57
M I/O Connector Mounting Options and Hardware Jack Screw Kits 42-1 2 - Clips 2 - Jack Screws.56 [14.1] Clip.12 [.0].22 [5.6] Ø.08 [2.0] Ø.18.11 [2.7] 42-2 2 - Spacers 2 - Jack Screws Ø.08 [2.0] Ø.18 Ø.1 [8.0] Spacer.25 [6.4].62 [15.7].11 [2.7] 42-2 - Screws 2 - Jack Screws Ø.18 Ø.08 [2.0] Ø.18.62 [15.7].11 [2.7].10 [2.5].5.11 [2.7] 42-4 2 - Jack Screws Ø.08 [2.0] Ø.18.10 [2.5].5.11 [2.7] Sheet 5 of 9 http://www.mconnectors.com 800-225-57
M I/O Connector Mounting Options and Hardware Board Lock Screws Use to attach connector to printed circuit board. Not for use for panel mounting. 44- Finish: Nickel Plated Thread size: M2.5.24 NOM. [6.0] Ø.20 MAX [5.0] Ø.20 MAX.079 MAX [5.0] [2.00] 44-4 Finish: Nickel Plated Recommended Max. Torque:.5 inch lbf [0.4 N m].25 NOM. [6.4] [4.5].071 MAX [4.5] [1.80] Panel Mount Screws Use to attach connector to panel or chassis. Not for use for PCB mounting. 44-26 Finish: Zinc Thread size: M2.6.1 NOM. [8.0].071 MAX [1.80] [4.5] 44-8 Finish: Zinc Thread size: M2.5.1 NOM. [8.0] [4.5].071 MAX [1.80] 44-44 Finish: Zinc Recommended Max. Torque:.5 inch lbf [0.4 N m].75 NOM. [9.52] [4.5].075 MAX [1.91] 44-45 Thread size: M2.5.1 NOM. [8.0] [4.5].071 MAX [1.80] Sheet 6 of 9 http://www.mconnectors.com 800-225-57
M I/O Connector Mounting Options and Hardware Bail Mount Kits for D Ribbon Connectors 475-1 475-4 Plastic Connectors Mounted to Front of Panel Plastic & Metal Faced Connectors Mounted to Rear of.0625,.075,.125 Panels 475-5 Kits Contain 2 ea. Bail Assy. Screw - 4-40 x.50. RND HD SLTD Nut - #4-40 UNC Washer - Lock-split Plastic & Metal Faced Connectors Mounted to Rear of 5,.042,.094 Panels Bail Assy. Screw Nut Washer Material Steel, Zinc plated Steel, Zinc plated Steel, Zinc plated Steel, Zinc plated Detail A D-Ribbon & Plastic Connectors Contact Mating Connectors Junction Shell Strain Relief Pull-Tab Quantity Plug Socket Plastic 14 572-100X 57-100X 485-1800Y 448-60 490-2 24 548-100X 549-100X 485-1700Y 448-61 490-2 6 66-100X 67-100X 485-2800Y 448-62 490-50 564-100X 565-100X 485-2500Y 448-6 490-5 Options: X = mounting style Y = F for flat cable, R for round cable http://www.mconnectors.com Inch [mm] Tolerance Unless Noted.0.00.000 Inch ±.1 ±.01 ±.005 [ ] Dimensions for Reference only Sheet 7 of 9 800-225-57
M I/O Connector Mounting Options and Hardware Jack Socket Screws Use to attach connector to panel or chassis. Not for use for PC board mounting. 12600-S-08 For [0.8 mm] Panel Thickness Finish: Nickel Plated Screw / Socket Thread Size: M2 / M2.21 [5.] 7 [5.00].04 [1.0] Panel Thickness Ø.15 [.8] Max x.1 [.4] Deep 12600-S-10 For.04 [1.0 mm] Panel Thickness Finish: Nickel Plated Screw / Socket Thread Size: M2 / M2.22 [5.6].04 [1.0].04 [1.0] Panel Thickness Ø.15 [.8] Max x.1 [.4] Deep 12600-S-12 For.05 [1.2 mm] Panel Thickness Finish: Nickel Plated Screw / Socket Thread Size: M2 / M2.2 [5.8].18.04 [1.0].05 [1.2] Panel Thickness Ø.15 [.8] Max x.1 [.4] Deep Board Lock Screw Use to attach connector to printed circuit board. Not for use for panel mounting. 44-46 Thread size: M2 Package Size: 600 Pieces0.20 [5.0].06 [1.6] Sheet 8 of 9 http://www.mconnectors.com 800-225-57
M I/O Connector Mounting Options and Hardware Mounting Hardware Guide D Sub Connectors Selection Guide - 9 to 7 Position D Sub Connectors 1. To mount a connector to a panel, select the correct Jack Socket Kit from table 1. 2. To secure a mating connector to a panel mounted connector, select the correct Jack Screw Kit from table 2.. To secure two connectors together in a mid-span application where no panel exists, select both the Jack Socket Kit and Jack Screw Kit from table 2. Panel Mounted Connectors Jack Socket Kits Panel Front Mount Rear Mount Thickness Kit Spacers Kit Spacers 1/16 41-1L 2 41-1L 0 /2 41-1L 2 41-1S 1 1/8 41-4 2 41-1S 0 Note: Spacers Placed Under Head of Jack Sockets Junction Connectors with Junction Shells Shell Jack Screw Kit Spacers Jack Socket Kit ----- 42-1 ----- 41-1L 485-2X00 42-2 2 41-4 57-41XX 42-2 2 41-4 57-51XX 42-2 2 41-4 57-65XX 42-x Supplied ----- 41-4 57-92XX 42-x Supplied or 41-7 41-1L Notes: 1. Jack Sockets used for MidSpan Applications. 2. Spacers Placed Under Head of Jack Screws. Selection Guide - 50 Position D Sub Connectors See TS-004 Socket and TS-005 Plug. Mounting Options Using 57-9250 Junction Shell & 505-62 Latch Bracket. See TS-0245. Front Panel Mounted Connectors: Connectors not designed for this application Rear Panel Mounted Connectors: 1/16 Panel:1 Spacer Latch Bracket and Panel /2 Panel:No Spacers. >/2 Panel:Latch Bracket not designed for these applications. Mid-Span Applications: Mount Latch Bracket directly to either the Plug or Socket Connector. Sheet 9 of 9 http://www.mconnectors.com 800-225-57
Important Notice All statements, technical information, and recommendations related to M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at M s option, to replace or repair the M product or refund the purchase price of the M product. Except where prohibited by law, M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this M product, regardless of the legal theory asserted. M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-57 www.mconnector.com Please recycle. Printed in USA. M 2010. All rights reserved. RIA-2217B-E