ebruary 007 Loadcenters & ircuit reakers Type Loadcenters & ircuit reakers Product Selection -15 onvertible Loadcenters M or MLO ase Units and evices 10,000/5,000 mperes Interrupting apacity omplete assembly consists of: Loadcenter, over, and either reaker Kit or Lug Kit. Table -1. Indoor Single-Phase - 10/40 V actory onded Split Neutral Top or ottom eed Maximum mpere of Single Poles ox Loadcenter ox and Panel atalog Loadcenter over atalog ombination Surface Lug Kit atalog reaker Kit ki atalog 15 N15 8 8S #10 1/0 L15N 10 #10 1/0 100N 15N 00 J N00J 8J 8JS #4 00 5 4 K 4N5K 8K 8KS #4 00 L5N 5 # 00 L5N 5 # 00 S15N S150N S175N S00N S15N S150N S175N S00N S5N Panel does not include main. Order main breaker or main lug kit separately. Loadcenters are factory bonded for service entrance applications. Remove bonding strap for separate neutral and ground bars for sub-feed applications. old down kit included. 5,000 I series combination rating is obtained when Types, T and P branch breakers are used with SR main. S breakers include line lugs only as standard. Note: Interrupting rating depends on main circuit breaker selected. Table -1. Outdoor Single-Phase - 10/40 V Insulated/ondable Neutral Maximum mpere of Single Poles ox Loadcenter ox and Panel atalog Lug Kit atalog reaker Kit ki atalog 00 8 8N00R #4 00 L5N 5 # 00 S15N S150N S175N S00N 15 N15R #10 1/0 L15N 10 #10 1/0 100N 15N 00 J N00R #4 00 L5N 5 # 00 S15N S150N S175N S00N 5 4 K 4N5R #4 00 L5N 5 # 00 S15N S150N S175N S00N S5N Panel does not include main. Order main breaker or main lug kit separately. Rainproof panels are furnished with hub closure plates. or rainproof hubs, refer to Page -4. Includes feed-through lugs for both phase and neutral conductors. old down kit included. 5,000 I series combination rating is obtained when Types, T and P branch breakers are used with SR main. S breakers include line lugs only as standard. Spa Panels Table -14. Spa Panels Single-Phase - 10/40 Vac Insulated/ondable Neutral actory Installed round ar mpere ircuit reaker Included nclosure Type Type of Trim Included ox Range u/l 60 or 75 for Lugs atalog 0 0 Outdoor 5R #14 1/0 0SP 40 40 Outdoor 5R #14 1/0 40SP 50 50 Outdoor 5R #14 1/0 50SP 60 60 Outdoor 5R #14 1/0 60SP Includes a 0I breaker, factory installed, and extra circuits for convenience. Includes a 40I breaker, factory installed, and extra circuits for convenience. Includes a 50I breaker, factory installed, and extra circuits for convenience. Includes a 60I breaker, factory installed, and extra circuits for convenience. Spa Panel utler-ammer Quick-Pro SM ll you need to know to save time and make more money. Specified on certain utler-ammer products, the Quick-Pro symbol allows for immediate recognition of products that are designed for straightforward installation. When you see Quick-Pro, you know you can install quickly sometimes up to 50% less than the usual installation time and move onto your next job. ox s................. Pages -7 and -8 iscount Symbol........... 08101001 or more information visit: www.eaton.com
ebruary 007 Loadcenters & ircuit reakers Type Loadcenters & ircuit reakers pplication escription - pplication escription Loadcenter onstruction utler-ammer Type loadcenters by aton orporation feature silver flash plated copper bus in all interiors. ingers are rated 00 amperes throughout the line. Therefore, the sum of the handle ratings connected to any one stab is limited to 00 amperes maximum. NM 1 boxes are manufactured from cold rolled 16 gauge sheet steel. Raintight boxes are manufactured from galvanized steel. ll boxes and trims are finished using an electrostatic powder coat, baked urethane paint process. Neutrals utler-ammer Type loadcenters feature three types of neutrals: actory-onded Split Neutral Single-phase main circuit breaker panels are supplied with a factory-bonded twin neutral. When used as a sub-panel, the bonding strap should be removed, and the bonding screw should be reinstalled. The bonded side is now the ground, and the un-bonded side is the neutral. When used as a service entrance panel, the unused neutral holes on either side may be used for terminating ground wires. Insulated Split Neutral Most single-phase main lug panels (1 circuits and greater) are supplied with a twin neutral with an insulated cross strap. These panels are shipped in an un-bonded state. or service entrance applications, the neutral must be bonded utilizing the bonding strap supplied with the panel. or sub-feed applications, the panel may be installed as is. Separate ground bars are provided on these panels. Insulated/ondable Single Neutral When a panel is supplied with a single neutral, it arrives from the factory in an unbonded state. ll that is required to bond the neutral in a service entrance application is to loosen the bonding screw and the neutral screw directly beside it, insert the bonding strap into the neutral bar, and re-tighten both connections. The single neutral can be moved by the contractor to the other side of the panel, if desired. In a service entrance application, where the neutral is bonded, unused neutral connections may be used for the termination of equipment grounds. rounds In service entrance applications where the neutral is bonded, unused neutral holes may be used for terminating ground conductors. In sub-feed panels, the neutral must be isolated (nonbonded), and ground wires must be terminated on a separate ground bar. The actory onded Split Neutral panels have sufficient terminations for both ground and neutral conductors. The Insulated Split Neutral panels are supplied with a separate factoryinstalled ground bar. Insulated/ ondable Single Neutral panels are supplied without a ground bar (unless otherwise noted), and ground bar kits if needed must be purchased separately. Surge Protectors The SUR Surge Protector has indicating lights that indicate when the units should be replaced. The S01 and S0 Surge Protectors internally short, causing the circuit breaker feeding the surge protector to trip. ll but the SUR Surge Protector should be wired to the load side of 15 or 0 ampere feeder circuit breakers mounted adjacent to the main incoming device. The SPULTR utler-ammer ome Surge Protector is an externally mounted TVSS unit that provides industrial level surge protection in a residential design. The SPULTR is also available factory installed in the loadcenter and carries a lifetime warranty. Standards and ertifications UL Listings ll utler-ammer Type loadcenters by are listed under UL ile 8741. Neutral and round Terminals The standard terminals on grounds and neutrals are rated to accept () #14 #10 u/l or (1) #14 4 wires. or larger cables, add-on neutral lugs may be ordered from the accessories on Pages - and -4. Note: N allows only one current carrying conductor per hole on neutrals unless otherwise noted. ottom-ed Loadcenters When the power cable is brought into the loadcenter from below the panel; then the main lug panels, and singlephase, 5 amperes and below, loadcenters can be rotated 180 degrees to allow straight-in wiring of power cables to the main terminals. ecause the SR main circuit breaker handle operates horizontally, the orientation of the main circuit breaker handle is consistent with the requirements of N rticle 40-81. utter Splicing Loadcenters are not UL listed as wiring troughs. Therefore, gutter splicing of riser cables to tap off to the main device is not permitted. Refer to N rticle 7-8. ire ue to the numerous openings in both loadcenter boxes and trims, they should not be mounted in firewalls. There is no approval method for sealing the enclosures for this application. ate ode The date of manufacture of each loadcenter is printed on the outside of the carton as well as inside the loadcenter. On the carton, the date code is printed on the end carton label. In the loadcenter, the date code is located on the small white label located on the right side wall (with the main device on top). The date code is in the following format: # # # &. The is the numeric code for the Lincoln, IL plant, and the three numbers are the year and week of manufacture e.g., 0. The & sign at the end signifies the decade of the 000s. Therefore, the date code 0& would indicate that the product was manufactured in the rd week of 000. The 1980s are represented by a + sign and the 1990s are represented by a = at the end of the code. 08101001 or more information visit: www.eaton.com
-4 Loadcenters & ircuit reakers Type Loadcenters & ircuit reakers Standards and ertifications ebruary 007 Plug-on Type reakers escription Quick-make, quick-break switch mechanism combined with inverse time element tripping operation and trip-free handle design. Type circuit breakers trip to the O position eliminating nuisance callbacks. The thermalmagnetic trip curve avoids nuisance tripping on mild overloads while reacting almost instantaneously to severe short circuit conditions. Multipole breakers have internal common trip connection to operate all poles simultaneously. andles are marked with ON-O indication and ampere rating of the breaker. Type breakers meet UL Standard 489, NM standards, and ederal Spec lassification W- 75 b/en. They are UL listed under ile 1171, 8741, 64 and 5187: and S certified file number LR87196, except Type T breakers. Type ircuit reaker s Single- and double-pole breakers rated 15 and 0 amperes have low instantaneous magnetic trip levels. The 15 and 0 ampere breakers with M suffix have high magnetic trip settings recommended for circuits with inherently high inrush currents. ll Type breakers are marked for heating, air conditioning and refrigeration (R) equipment application. Single-pole 15 0 ampere breakers are also suitable for switching duty (SW). Shunt trip coils operate on 10 Vac and require one additional pole space per breaker. or more information visit: www.eaton.com 08101001
ebruary 007 Loadcenters & ircuit reakers Type Loadcenters & ircuit reakers eatures, enefits and unctions -5 eatures, enefits and unctions xtra 1.5-Inch (8.1 mm) Knockout for undling Provides for easier installation, less installation time. Top or ottom eed Straight-in wiring saves labor and material. Only one panel for either application no modifications necessary. Tangential enter Knockout or easier installation Single Keyhole Mounting Just one keyhole at top and bottom for easier mounting and leveling. Unique Sandalwood inish Immediately recognizable, esthetically appealing, scratch resistant powder coating. ommercial rade reaker 5 ki series rated main breaker in 150 and 00 ampere loadcenters. 4 and 100 ki series ratings available. rywall Marking on nclosure Indicates proper mounting depth for flush applications. One-Piece Silver lash Plated opper us Provides superior conductivity throughout the entire product line. Steel ackpan Provides positive, reliable breaker mounting. One-piece designed for stability. Separately Packaged overs ull line of true surface and combination covers. uilt-in flush leveling feature. hoice of circuit identification by breaker labels or circuit directory. Neutral esign (or styles as indicated) onding strap is easily removable for sub-panel applications providing a ground and neutral. actory bonded for service entrance applications providing a split neutral. mple additional /0 lugs provided; no kits necessary. 00% size neutral. onvertible Styles vailable Uses field installable main breaker or main lug kits. lexible inventory same breaker is used in loadcenter and circuit breaker enclosures. Type Loadcenter Improved ndwall Knockouts Larger KOs are balanced to enhance installed appearance and to ease use of existing wiring. 08101001 or more information visit: www.eaton.com
-8 Loadcenters & ircuit reakers Type Loadcenters & ircuit reakers Product Selection ebruary 007 Product Selection Table -1. Loadcenter Selection hart Service Short ircuit urrent reaker/ Lug Loadcenters onvertible Loadcenters ranch reakers nclosures Loadcenter and reaker ccessories ussing Single-phase, three-wire, 10/40 Vac. Three-phase, three-wire, 40V corner grounded delta (see ccessories Page -4). Three-phase, four-wire, 08Y/10 Vac. Three-phase, three-wire, 40 Vac delta. 10,000 I: ll single- and three-phase loadcenters 40 through 400 amperes, to 4 circuits except when series ratings are applied. 5,000 I: ll convertible and factory installed main breakers single-phase loadcenters rated 150 through 5 amperes using Type S main breakers. 4,000 and 100,000 are available on some styles: single-phase and three-phase. Single-Phase reaker: 100, 15, 150, 00, 5, 400 amperes. Lugs: 40, 70, 15, 150, 00, 5, 400 amperes. reaker or Lugs: single-phase up to 5 amperes Type : 10 to 150 amperes. One-, two-, and three-pole. Selected amperages available in shunt trip, R and switching duty. round ault reakers: 15 to 60 amperes. Type -I: 15 to 0 amperes. One-, two- and three-poles. PMPI reakers. -M igh Magnetic. -M50 igh mbient. NM Type 1 indoor. NM Type R outdoor. ranch ircuit reaker: uxiliary components old down kits andle ties Lockoffs Lockdogs omplete Line of round ar Kits 5, 10, 14 and 1 circuits, some with additional #/0 lugs. ach terminal will accommodate: () #14 #10 u/l or (1) #14 #4 u/l. Sub-feed Lugs 15, 150 amperes two- and three-pole. Shunt trips. Silver lash Plated opper us is a standard feature. Three-Phase reaker: 150, 00, 5, 00, 400 amperes. Lugs: 15, 150, 00, 5, 400 amperes. Type -I arc fault circuit interrupter. Type P: 10 to 15 amperes. One-, two- and three-pole. Three-position commercial trip. Selected amperages available in R switching duty. Type P-I: 15 to 0 amperes. One-, two- and three-pole. Type P-I: 15 to 0 amperes. One-pole ground fault breakers. Meets or exceeds UL requirements for indoor or outdoor applications. Surge Protection: Single-phase whole home surge protector Single-phase plug-on surge protector Single-phase bottle type surge protector Three-phase bottle type surge protector Universal rainproof conduit hubs roup One: /4, 1, 1-1/4, 1-1/, inches (,,, 8.1, 50.8 mm). roup Two:, -1/, inches (50.8, 6.5, 76. mm). dapter plate. Table -. Loadcenters 100 5 mperes and 1 4 ircuits atalog ing System 4 00 K Table -. Indoor overs Ordered Separately 8 K L Type Type /4-inch ( mm) ranch ircuit reakers of ircuits Selection ircuits 4 8 1 14 16 18 0 4 8 0 4 us mperes 40 70 100 15 150 00 5 Phases lank = Single-Phase = Three-Phase evice L = Lug Only = reaker N = onvertible = igh I reaker ox s J K L R = Outdoor (No over) Type Loadcenter over Series Mounting = ombination lush/surface S = Surface ox Indicated in Loadcenter atalog Note: ll combinations are not valid, refer to the catalog section. or more information visit: www.eaton.com 08101001
ebruary 007 Loadcenters & ircuit reakers Type Loadcenters & ircuit reakers Technical ata and Specifications -7 Technical ata and Specifications Residential/ommercial/Unit nclosure ox s Table -60. Residential Loadcenters ox imensions in Inches imensions in mm eight Width epth eight Width epth NM Type 1 Indoor 5 6 7 J K L 9 11.8 1.00 16 9.1 9.1 4.1 4.1 7.00 9.00 NM Type R Outdoor 5R 6R 7R J K L 9 11 1.00 16 9.1 9.1 4.1 4.1 7.00 9.00 4 6.88 1 4 6 1.1.9.69.1 4.69 41. 88.9 0. 45.5 5.4 79.8 79.8 99.8 990.6 41. 98.5 0. 45.5 5.4 79.8 79.8 99.8 990.6 114. 174.6 79.4 114. 165.1 79.4 79.4 86.1 9.7 79.4 114. 9.7 Residential Loadcenter Knockout imensions in Inches (mm) Residential NM Type 1 Indoor and NM Type R Outdoor nclosures. Table -6. Knockouts for ox s 5, 6, 7, 5R, 6R, 7R ode iameter in Inches iameter in mm I 1 1 1.00 1.00 8.1 8.1 8.1 50.8 ub 8.1 50.8 Table -61. ommercial Loadcenters ox 5 ox 5R ox imensions in Inches imensions in mm eight Width epth eight Width epth NM Type 1 Indoor P PM 54.8 6.6 6.00 6.00 181.1 1590.7 5.4 5.4 15.4 15.4 ub Table -6. Types and Unit nclosures imensions in Inches imensions in mm eight Width epth eight Width epth NM Type 1 Indoor.5 8.88 4 590.6 114. NM Type R Outdoor.69 9.1 5.44 601.7 6.5 18.1 ox 6 ox 6R Note: ox sizes do not include covers/fronts. ub ox 7 ox 7R igure -11. Knockout Positions 08101001 or more information visit: www.eaton.com