Power on board #96 100% safety, 100% integration, 100% cost-effectiveness: The compact and efficient solution for UL-600V applications in the lower performance range (up to 12 kva). 29 A at 400V (IEC) 18.5 A at 600 V (UL) Single compartment mating profile Clamping range: 0.08-4 mm² / AWG 28-12 Assistance with device approval: Fulfils requirements for 600 V as per UL 508 / UL840. Fulfils the stricter touch-protection requirements of IEC68100-5-1. The slimming diet for multiple-stage device series: reduced size and cost cuts in the lower high-volume performance range without compromising the device approval! Order No. 1093450000 Type Version PCB plug-in connector, female plug, 7.62 mm, No. of poles: 4, 180, Clamping yoke connection, Clamping range, rated connection, max.: 4 mm², GTIN (EAN) 4032248864430 Qty. 35 pc(s). Product data IEC: 630 V / 29 A / 0.2-4 mm² UL: 600 V / 20 A / AWG 20 - AWG 12 Packaging Catalogue status 04.06.2013 / We reserve the right to make technical changes. 1
Technical data Dimensions and weights Net weight 6 g System parameters Product family OMNIMATE Power - series Wire connection method BL/SL 7.62HP Clamping yoke connection Conductor outlet direction 180 Pitch in mm (P) 7.62 mm Pitch in inches (P) 0.3 inch No. of poles 4 Number of rows 1 Screwdriver blade 0.6 x 3.5 Screwdriver blade standard DIN 5264 Tightening torque, min. 0.4 Nm Tightening torque, max. 0.5 Nm Clamping screw M 2.5 Stripping length 7 mm L1 in mm 22.86 mm L1 in inches Touch-safe protection acc. to DIN VDE 0.9 inch 0470 IP 20 Touch-safe protection acc. to DIN VDE 57 106 Safe from finger touch Material data Insulating material PBT Colour Black Colour chart (similar) RAL 9011 UL 94 flammability rating V-0 CTI 200 Contact material Cu-Leg Contact surface tinned Continuous operating temp., min. -25 C Continuous operating temp., max. 100 C Connectable conductors Clamping range, rated connection, min. 0.08 mm² Clamping range, rated connection, max. 4 mm² Wire connection cross section AWG, Wire connection cross section AWG, min. AWG 28 max. AWG 12 Solid, min. H05(07) V-U 0.2 mm² Solid, max. H05(07) V-U 4 mm² Flexible, min. H05(07) V-K 0.2 mm² Flexible, max. H05(07) V-K 4 mm² w. wire end ferrule, DIN 46228 pt 1, min w. wire end ferrule, DIN 46228 pt 1, 0.2 mm² max. 2.5 mm² w. plastic collar ferrule, DIN 46228 pt 4, min. 0.2 mm² w. plastic collar ferrule, DIN 46228 pt 4, max. 2.5 mm² Plug gauge acc. to EN 60999 a x b; Ø 2.8 mm x 2.4 mm DIN IEC rating data Rated current, min. no. of poles (TU=20 C) 29 A Rated current, number of poles (Tu=40 C), min 25 A Rated voltage for surge voltage class / pollution degree II/2 630 V Rated voltage for surge voltage class / pollution degree III/3 400 V Rated impulse voltage for surge voltage class/ pollution degree III/2 6 kv Short-time withstand current resistance 3 x 1s with 180 A Rated current, max. no. of poles (Tu=20 C) Rated current, number of poles (Tu=40 C), max. Rated voltage for surge voltage class / pollution degree III/2 Rated impulse voltage for surge voltage class/ pollution degree II/2 Rated impulse voltage for surge voltage class/ contamination degree III/3 26.5 A 23 A 500 V 4 kv 6 kv Catalogue status 04.06.2013 / We reserve the right to make technical changes. 2
Technical data CSA rating data Rated voltage (Use group B) 600 V Rated current (use group B) 20 A Rated voltage (Use group C) 600 V Rated current (use group C) 20 A Rated voltage (use group D) 600 V Rated current (use group D) 5 A Wire cross-section, AWG, min. AWG 20 Wire cross-section, AWG, max. AWG 12 UL 1059 rating data Rated voltage (use group B) 600 V Rated current (use group B) 20 A Rated voltage (use group C) 600 V Rated current (use group C) 20 A Rated voltage (use group D) 600 V Rated current (use group D) 5 A Wire cross-section, AWG, min. AWG 20 Wire cross-section, AWG, max. AWG 12 Classifications eclass 6.2 27-26-07-04 eclass 7.1 27-44-04-02 Notes Notes Additional colours on request Gold-plated contact surfaces on request Rated current related to rated cross-section & min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 P on drawing = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. Approvals Approvals ROHS Conform Catalogue status 04.06.2013 / We reserve the right to make technical changes. 3
Drawings Catalogue status 04.06.2013 / We reserve the right to make technical changes. 4
Mating connector (fully pluggable) SL 7.62HP/90F Power on board 100% safety, 100% integration, 100% cost-effectiveness: The compact and efficient solution for UL-600V applications in the lower performance range (up to 12 kva). 29 A at 400V (IEC) 18.5 A at 600 V (UL) Single compartment mating profile Clamping range: 0.08-4 mm² / AWG 28-12 Assistance with device approval: Fulfils requirements for 600 V as per UL 508 / UL840. Fulfils the stricter touch-protection requirements of IEC68100-5-1. The slimming diet for multiple-stage device series: reduced size and cost cuts in the lower high-volume performance range without compromising the device approval! Male header, 90 outlet angle with screw flanges 1026870000 SL 7.62HP/04/90F 3.2 SN BK BX PCB plug-in connector, male header, Flange, Solder of poles: 4, 90, Solder pin Black, 1026830000 SL 7.62HP/04/90F 3.2 SN OR BX PCB plug-in connector, male header, Flange, Solder of poles: 4, 90, Solder pin Orange, 4032248752362 100 pc(s). IEC: 630 V / 29 A 4032248752324 100 pc(s). IEC: 630 V / 29 A SL 7.62HP/180F {Reference (Object) not found: prod26080395970171} Male header, 180 outlet direction, with screw flanges 1140890000 SL 7.62HP/04/180F 3.2 SN BK BX PCB plug-in connector, male header, Flange, Solder 4032248923373 100 pc(s). IEC: 630 V / 26 A Catalogue status 04.06.2013 / We reserve the right to make technical changes. 5
Mating connector (fully pluggable) of poles: 4, 180, Solder pin Black, 1141000000 SL 7.62HP/04/180F 3.2 SN OR BX PCB plug-in connector, male header, Flange, Solder of poles: 4, 180, Solder pin Orange, 4032248923809 100 pc(s). IEC: 630 V / 26 A SL 7.62HP/90LF Power on board 100% safety, 100% integration, 100% cost-effectiveness: The compact and efficient solution for UL-600V applications in the lower performance range (up to 12 kva). 29 A at 400V (IEC) 18.5 A at 600 V (UL) Single compartment mating profile Clamping range: 0.08-4 mm² / AWG 28-12 Assistance with device approval: Fulfils requirements for 600 V as per UL 508 / UL840. Fulfils the stricter touch-protection requirements of IEC68100-5-1. The slimming diet for multiple-stage device series: reduced size and cost cuts in the lower high-volume performance range without compromising the device approval! Male header, 90 outlet angle with solder flanges 1095940000 SL 7.62HP/04/90LF 3.2 SN BK BX PCB plug-in connector, male header, Solder flange, Solder connection, 7.62 mm, No. of poles: 4, 90, Solder pin length (l): 3.2 mm, tinned, Black, 1096050000 SL 7.62HP/04/90LF 3.2 SN OR BX PCB plug-in connector, male header, Solder flange, Solder connection, 7.62 mm, No. of poles: 4, 90, Solder pin length (l): 3.2 mm, tinned, Orange, 4032248957477 100 pc(s). IEC: 630 V / 29 A 4032248960156 100 pc(s). IEC: 630 V / 29 A Catalogue status 04.06.2013 / We reserve the right to make technical changes. 6
Mating connector (fully pluggable) SL 7.62HP/180LF {Reference (Object) not found: prod26080395970171} Male header, 180 outlet direction, with solder flanges 1141220000 SL 7.62HP/04/180LF 3.2 SN OR BX PCB plug-in connector, male4032248924035 100 pc(s). IEC: 630 V / 26 A header, Solder flange, 7.62 mm, No. of poles: 4, 180, Solder pin length (l): 3.2 mm, tinned, Orange, 1141110000 SL 7.62HP/04/180LF 3.2 SN BK BX PCB plug-in connector, male4032248923762 100 pc(s). IEC: 630 V / 26 A header, Solder flange, 7.62 mm, No. of poles: 4, 180, Solder pin length (l): 3.2 mm, tinned, Black, Catalogue status 04.06.2013 / We reserve the right to make technical changes. 7
Mating connector (conditionally pluggable) SL 7.62HP/90G Power on board 100% safety, 100% integration, 100% cost-effectiveness: The compact and efficient solution for UL-600V applications in the lower performance range (up to 12 kva). 29 A at 400V (IEC) 18.5 A at 600 V (UL) Single compartment mating profile Clamping range: 0.08-4 mm² / AWG 28-12 Assistance with device approval: Fulfils requirements for 600 V as per UL 508 / UL840. Fulfils the stricter touch-protection requirements of IEC68100-5-1. The slimming diet for multiple-stage device series: reduced size and cost cuts in the lower high-volume performance range without compromising the device approval! Male header, 90 outlet angle 1026780000 SL 7.62HP/04/90G 3.2SN BK BX PCB plug-in connector, male4032248752188 100 pc(s). IEC: 630 V / 29 A header, closed side, Solder of poles: 4, 90, Solder pin Black, 1980390000 SL 7.62HP/04/90G 3.2SN OR BX PCB plug-in connector, male4032248675449 100 pc(s). IEC: 630 V / 29 A header, closed side, Solder of poles: 4, 90, Solder pin Orange, SL 7.62HP/180G {Reference (Object) not found: prod26080395970171} Male header, 180 outlet direction, without flange 1048890000 SL 7.62HP/04/180G 3.2SN OR BX PCB plug-in connector, male4032248786862 100 pc(s). IEC: 630 V / 26 A header, closed side, Solder Catalogue status 04.06.2013 / We reserve the right to make technical changes. 8
Mating connector (conditionally pluggable) of poles: 4, 180, Solder pin Orange, 1122580000 SL 7.62HP/04/180G 3.2SN BK BX PCB plug-in connector, male4032248904662 100 pc(s). IEC: 630 V / 26 A header, closed side, Solder of poles: 4, 180, Solder pin Black, Catalogue status 04.06.2013 / We reserve the right to make technical changes. 9