LED REV.09.27.10 Junction Box Cover Wet Location Junction Box Supplied by Electrician With Micro Louver Step Light Kit -LL D FC DIA. 2' 380 0.8' 4' 95 10" 6' 42.2 1'-8" 8' 23.8 2'-4" 10' 15.2 3'-2" 12' 10.6 4'-10" Beam Angle 23 Louver Lens Retainer Micro Louver Ring Glass Lens Lens Neutral Density Filter or Warming Filter 20 Tilt Lens Film Glass Lens Inner Retainer Ring 3.43" (8.7cm) STEP LIGHT KIT -LL 2.75" Diameter Junction Box Supplied by Electrician J-Box Cover Included 0.13" (.33cm) 1.5" (3.8cm) 3.25" (8.25cm) 4.3" (10.9cm) 3.85" (9.78cm) The 3" round or square recessed has a 12VAC 9 watt, high powered warm white LED and features a 23 degree precise focus, tempered glass lens with a marine-grade aluminum, round, or square beveled edge trim. The is rated for outdoor using a wet location electrical box or indoor using a standard octagon electrical box. The aluminum housing dissipates heat and allows the LED to operate at its optimum working temperature, thus giving the LED a stable light output and long lifetime. The trim accepts any color of Rosco or Lee color filter gels. Includes junction box cover; order remote transformer separately.compatible remote power supplies are TE-60L-12, T-150-12 or T-300-12. Edge Lighting Finish: Satin Aluminum 345 10.2 33 80 2812 (Warm White) Lamp Specification: 70% lumen maintenance based on 50,000 hours of operation. 10 Watts is equal to 35 Watt MR16. BEAM SPREAD INPUT VOLTS WATTS CBCP RATED LIFE COLOR TEMP (K) CRI 23 degrees 12VAC 10.2 1,520 50,000 2,812 80 Remote Power: Use Electronic TE-60L-12, Magnetic T-150-12, T-300-12 Dimmer: Visit www.edgelighting.com for updates Other WS46-LMQMF5 -**-**-** CODE 1.8 lb (.82kg) RD SC Step Light Kit LL LL 2" Louver with 20 Beam Tilt Lens, Neutral Density Filter, Warming Filter Trim Sun3 Step Light Kit RD Round SC Surface Cover SQ Square Finish SA SA Satin Aluminum
LED REV.09.27.10 -HD-SQ-SC-SA -HD-RD-SC-SA -JC The 3" round or square recessed has a 12VAC 9 watt, high powered warm white LED and features a 23 degree precise focus, tempered glass lens with a marine-grade aluminum, round, or square beveled edge trim. The is rated for outdoor using a wet location electrical box or indoor using a standard octagon electrical box. The aluminum housing dissipates heat and allows the LED to operate at its optimum working temperature, thus giving the LED a stable light output and long lifetime. The trim accepts any color of Rosco or Lee color filter gels. Compatible remote power supplies are TE-60L-12, T-150-12 or T-300-12. With Micro Louver Step Light Kit -LL Finish: Satin Aluminum Lamp Specification: 70% lumen maintenance based on 50,000 hours of operation. 10 Watts is equal to 35 Watt MR16. BEAM SPREAD INPUT VOLTS WATTS CBCP RATED LIFE COLOR TEMP (K) CRI 23 degrees 12VAC 10.2 1,520 50,000 2,812 80 Films Louver Remote Power: Use Electronic TE-60L-12, Magnetic T-150-12, T-300-12 Dimmer: Visit www.edgelighting.com for updates SUN-LL 1.8 lb (.82kg) Type Trim Finish HD RD SC SA Sun3 Step Light Kit HD Head Only RD Round SQ Square SC Surface Cover SA Satin Aluminum CODE LL Step Light Kit LL 2" Louver with 20 Beam Tilt Lens, Neutral Density Filter, Warming Filter JC Junction Cover LLH Louver Lens Holder
OPTICAL ACCESSORIES FOR LOUVER LENS HOLDER Page 1 ACCESSORIES Sun3 Louver Lens Holder MR16 Louver Lens Holders secure onto front of the lamp holding up two lenses or combination of a hexcell louver and lens. Required for securing louvers, lenses and filters in the Sun3. TYPE LLH LLH Louver Lens Holder Hexcell and Micro Louver The Hexcell Louver eliminates glare from the light beam. The Micro Louver used in step lighting requires both the louver lens holder #-LLH and the 20 degree filter #LF2-20D. Hexcell Louver Micro Louver LO16 LO16 MR16 TYPE H H Hexcell M Micro Louver 20D ND BL YP 25K 27K RD BP Film Lenses and Filters Add film lenses and filters to shape beam, change color or adjust color temperatures. Louver lens holder #-LLH required. LENS FILM LF2 LF2 Lens Film 2" diameter LENS OR COLOR 20D 20D Refracts beam 20 down 25K 2500K Very Warm White 27K 2700K Very Warm White ND Neutral Density Filter dims light 50% RD Red Film BL Blue Film BP Blue to Pink cross fade YP Yellow to Pink cross fade
OPTICAL ACCESSORIES FOR Page 2 ACCESSORIES IN YL GR RD PH CW Dichroic Glass Lens Dichroic lenses operate on a passive-reflective basis, reflecting unused wavelengths while passing wanted portions of spectrum. Dichroics are high in transmission, producing brighter, cleaner, saturated colors. Louver lens holder #-LLH not required. MG DP DB BL LENS MR16 RD YL GR BL PH DICHROIC COLOR RD Red MG Magenta Yellow CW Cool White Green (3100K-4250K) Blue DB Dark Blue Peach DP IN Dark Pink Incandescent (3100-2700K) WDF WD MD UV LS Optical Lens The soft focus lens reduces lamp glare, spread lenses elongate and diffuser lenses diffuse the light beam. UV filter lens allows quality light to pass through while blocking the ultra violet radiation. Louver lens holder #-LLH not required. SF F LSF LENS MR16 OPTICAL TYPE F F Frost SF Soft Focus MD Medium Diffuser WD Wide Diffuser WDF Wide Diffuser Frost LS Linear Spread LSF Linear Spread Frost UV UV Glass
150 & 300W/12V MAGNETIC REMOTE MOUNT TRANSFORMER REV.09.27.10 TRANSFORMER SINGLE FEED MAGNETIC Low Voltage Feed Wire Size Chart Use to decide the correct copper wire size for a recommended 3 percent voltage drop. The length shown is the length of wire from the transformer to the power feed canopy/j-box. 12 Volt 12 VOLT 5 ft. 6-15 ft. 16-20 ft. 21-40 ft. 100 watt #12 GA #10 GA #10 GA #8 GA 150 watt #12 GA #10 GA #8 GA #6 GA 300 watt #10 GA #8 GA #6 GA #4 GA L D The 150 or 300 watt 12 volt magnetic remote mount transformers convert line voltage into 12 volt power and are protected by fast-acting circuit breakers. All 12 volt remote magnetic transformers are LED compatible with 12 volt AC LEDs. H Power Input: T-150-12 T-300-12 120 volts AC 1.25 Amp 120 volts AC 2.5 Amp 230 volt AC 0.65 Amp 230 volt AC 1.3 Amp 277 volt AC 0.54 Amp 277 volt AC 1.1 Amp Power Output: T-150-12 12 volts AC 150 watt 12.5 Amp T-300-12 12 volts AC 300 watt 25 Amp Installation: Remote magnetic transformers must be installed in an accessible location, such as an attic or in a closet, up to 20 feet from the power feed canopy. Outdoor version available. Dimming: T-150-12 Halogen: 450 Watt Magnetic Low Voltage Dimmer T-300-12 Halogen: 600 Watt Magnetic Low Voltage Dimmer. Compatible magnetic dimmers are connected on the line voltage side of transformers. Some buzzing may occur at low levels and may be reduced with a de-buzzing coil. Visit www.edgelighting.com for up-to-date LED dimming information. Dimensions: 8.75"(L) x 4.4"(D) x 3.8"(H) (22.2cm x 11.2cm x 9.7cm) 8.41 lb (3.81 kg) System T T Remote Transformer Power/Voltage Output 150-12 150-12 150 Watt 12 Volt 300-12 300 Watt 12 Volt Voltage Input Standard 120V (leave blank) 2 230V 50Hz 3 277V 60Hz Type Standard Indoor (leave blank) O Outdoor consultant: approved by:
60W/12V REMOTE ELECTRONIC LED POWER SUPPLY REV.05.12.10 TRANSFORMER SINGLE FEED ELECTRONIC 12V 60W 2.18" (5.5cm) 1.23" (3.12cm).75" 1.9cm The compact, lightweight remote electronic 60W/12V LED Power Supply converts standard 120 volt line voltage to 12 volts and features built-in short-circuit protection. In the event of a short or overload, reset transformer at wall switch once short or overload is corrected. The single-feed transformer is both 12 volt AC LED and halogen compatible; it fits inside a 4" electrical box behind a power feed canopy. Dimming: 300 watt low voltage electronic dimmer For LED dimming information, visit www.edgelighting.com Mounting Requirements: Must be in accessible location or inside an electrical box.8 lb (.36 kg) System TE TE Transformer Electronic Power / Voltage Output 60L 12 60-12 60 Watt 12 Volt, Halogen only 60L-12 60 Watt 12 Volt, LED and halogen