Channel Nuts Superstrut channel nuts are manufactured from Grade 2 mild steel and are case hardened. Data Superstrut self aligning channel nuts are designed to provide resistance to pullout and resistance to side slip in excess of the full strength of the channels with which they are used. The extreme resistance to side slip results from the unique design of the alternate teeth, spaced and designed to develop a wedging action that increases with pressure or load. Screw Threads ll threaded products are merican Standard thread, free fit class 2. Thread 5/6 5/ / Threads per inch 20 6 3 Torque (ft.-) 6 50 0 25 5 25 Spring Nut Selector Chart Finish and special materials SPRING NUT 0-EGC 0-5/6EGC 0-EGC 0-EGC 0-0-EGC 0-5/6EGC 0-EGC 0-EGC H0-EGC H0-EGC CM0- CM0- CM0- CM0- UC0- UC0- UC0- CHNNEL SERIES - R - R C D E H Standard finish for all hardware is Electrogalvanized (EGC) or GoldGalv. Stainless Steel Type 36 is also available. Contact your Regional Sales Office for availability and minimum quantities.
Superstrut 0 Regular Spring Nut* 0 Short Spring Nut* 0-EGC 0-5/6EGC 5/6 0-EGC 0-EGC 2 0-5/EGC 5/ 0-0-/ / H0 Long Spring Nut* 0-EGC 0-5/6EGC 5/6 0-EGC 0-EGC H0-EGC H0-EGC 4 vailable in Stainless Steel 36. Nut is square over in. size. For all and C Series channel and inserts. For all and D Series channel and inserts. For all E and H Series channel and inserts. 0 Springless Nut in. thick C0 Springless Nut Heavy duty in. thick 3EG Springless Nut Light Duty 0-EGC 0-5/6EGC 5/6 0-EGC 0-EG 0-5/EG 5/ 0-EG C0-EGC C0-EGC C0-EGC C0-5/EGC 5/ C0-EGC Nut is square over in. size. For all, C, E and H Series channel and inserts. Nut is square over in. size. 2 to 5 Regular Spring Stud Nut* to Springless Stud Nut 2-x0EG 2-x25EG 4-x0EG 4-x25EG 5-x0EG 5-x25EG olt Length Dia - 5-5 - 5 For all and C Series channels. -x0eg -x25eg -x0eg -x25eg olt Length - - 3 3.5 2-EG For Channel x 6 For attaching fixture to channel slot down or to channel slot up knockouts. Specify length. Hex nut included. CM0- CM0- * CM0-2 **CM0- UC0- UC0- UC0-2 GoldGalv only For all -5/ in. channel. *Will not fit Series channel. **For Series channel. GoldGalv only For all -5/ in. and - in. channels. May be used with LL Strut Depths. Can be used for CM0 Series, 0 Series, 0 Series and 0 Series. E45 Standard Hex Nut ES45 Swivel Nut and Jam Nut Combinations E45-EGC E45-EGC E45-EGC E45-5/EG E45-EGC E45-/EGC E45-EGC 5 2 Stud Nut UC0 Universal Nylon Cone Nut CM0 Nylon Cone Nut 3EG Dia.2.60 2. 5/ 6.2 2.0 /.00 2.00 ES45- ES45-5.5 6.0 2 Unhardened Square Nut 2-2- 2-2-5/ 2-2-/ 3 4 4 5/ 2 / E46 Standard Square Nut E46-HDGC.3 E46-5/6HDGC 5/6.60 E46-HDGC 2.65 E46-5/HDGC 5/.0 *Supplied with a plastic sleeve over the spring portion to prevent tangling inside the carton. w w w. tnb.c a
E4 Flat Steel Washer EF4 Fender Washer E4 Lock Washer vailable in Stainless Steel. E4-EG 0.6 E4-5/6EG 5/6. E4-EG.4 E4-EG 3.5 E4-5/EG 5/.6 E4-EG. E4-/EG / 5.40 vailable in Stainless Steel. EF4-EGC - 5/6 3. EF4-EGC - /6 2. EF4-EGC 2 /6 5.0 vailable in Stainless Steel. E4-EG 0.26 E4-EG 0.50 E4-EG.0 E4-5/EG 5/ 2.5 E42 Hex Head Cap Screw E50S Lag olt E5 Coach Screw Rod vailable in Stainless Steel. E42-x0EG x.4 E42-x50EG x- 2.43 E42-x0EG x 4. E42-x50EG x- 5.64 E42-x0EG x.4 E42-x50EG x-.00 E42-x200EG x2. E42-x225EG x2-.0 E42-x250EG x2-2.52 E42-x25EG x2-3.22 Drill E50S-x-EG x- 5 E50S-x2EG x2 E50S-x2-EG x2- E50S-x3EG x3 E50S-x-EG /32 x- 2 E50S-x2EG /32 x2 3 E50S-x2-EG /32 x2-5 E50S-x3EG /32 x3 Rod Std Rod Lengths Machine threaded opposite end, carbon steel. E5-x4EG 4 E5-x6EG 6 4 E5-xEG 22 E5-xEG 2 E5-x2EG 2 35 E5-x4EG 4 E5-x6EG 6 22 E5-xEG 40 E5-xEG 5 H4 Hanger Rod Continuous Threaded H Rod Couplings Thread Wt./ 0 ft. Load H4-xEGC 2.5 50 H4-xEGC 2 6 H4-xEGC 53.5 30 H4-5/xEGC 5/ 5 H4-xEGC 23 2 H4-/xEG / 30 30 H4-xEG 24 460 lack available upon request Sold per foot; standard length, ft. lso available in stainless steel (36) standard length 6 ft. National coarse thread Rod /.0 5/6 / 3.5 -/ 3.50-5.50 5/ 2-/.00 2-2.00 / 2-55.00 2-56.00 Standard Rod Coupling Example: H-EG Order by product number, rod size, and finish. vailable in Stainless Steel. Rod to - 3.50 to - 6.0 to 5/ - 4.00 5/ to - 2.00 to / - 40.00 Rod Reducer Coupling Example: H-xEG
H22 Trapnut TM Strut Fastener Load H 22 50 H 22 50 H 22 0 H 22 EG 50 H 22 EG 50 H 22 EG 0 H 22 SS6 50 Finishes: Electrogalvanized (EG), GoldGalv, Stainless Steel Type 36 (SS6) Std. Ctn. 50 M Eye Socket E Rod Pipe E -/32 5 230-2 -/32 6 2- - 3- -/32 3 30 5/ 4-5 -3/6 6 2-5/32 3 2400 / 2-/32 44 200 MX OLT SIZE Standard Finishes - are (), Electrogalvanized (EG) Malleable iron. For attaching hanger rod to various types of hangers and beam clamps. Order by product number, rod size, and finish. Example: M- Complies with Specification MSS SP6, Type 6. E20 Swivel Joint E20 Weldless Eye Nut Standard Finish - are () Drop Forged Steel. For use on high temperature piping installations. Order by product number and rod size. Example: E20- E20- - 5 00 E20- - 25 00 Rod C D E F T / 5/ - 2 2-20 200 / 5/ - 2 2-22 200 5/ - - 2-3 60 5000 - - 2-3 56 5000 / - -5/ -5/6 3-5/ 4-4 000 - -5/ -5/6 3-5/ 4-6 000 E22 Swivel Joint E30 Swivel Joint E3 Swivel Joint E22- - 2 00 E22- - 4 00 E30- - 23 00 E30- - 2 00 E3- - 25 00 E3- - 52 00
C Square Washer Rod Hole Overall Dimensions C-* /6 3x3x3/6 2 C-* /6 3 x 3 x 3/6 2 C-5/* 5/ /6 3x3x 4 C-* 3/6 3 x3x 42 C-/* / 5/6 4x4x 5 C-* -/ 4x4x 60 *Finishes HDG EG SS6 Used for beam applications. For channel applications use 24. H5 Standard U-olt Pipe C D E Standard Finishes - Electrogalvanized (EG), GoldGalv, Stainless Steel or are () Example: H5-EG s through 4 in. furnished with one hex nut per leg. s 5 in. and above furnished with two hex nuts per leg. Order by, pipe size, finish. Complies with Specification MSS SP6, Type 24. 5/6 - - 2-3 500 -/ - -5/ 3-/6 5 2000 - -/ -5/ 3-5/6 6 2500 - -23/32 - -5/32 3-2500 - 2 - -/6 3-2500 2 2-/6 2-/6 -/ 4-/6 32 3300 2-2-5/6 2-/6-3/6 5-/ 34 4000 3 3-/6 2-5-/6 3 4000 3-4-3/32 2-23/32 6-3/6 40 4000 4 4-/32 2- -3/32 6-5/6 46 4000 5 5-5/ 3 2-/32-5/6 4000 6 6-3- 2-3/6 5/ -/ 4000-3- 2-3/6 5/ 2-/ 233 4000 -/ 4 3 4-/6 4 5400 2 2-/ 4-3- / 6-5/6 3 500 2