LED Minispluga - LED Spluga - LED Maxispluga Gamma di apparecchi a LED per illuminazione di aree urbane. Ideale per l illuminazione di strade, parcheggi, aree residenziali. Installazione: su palo con codolo Ø 60mm oppure su superfici verticali e orizzontali (con accessori di montaggio). Corpo e telaio: in alluminio pressofuso UNI 5076 verniciato con polvere termoindurente poliestere. Imbocco a palo: in alluminio pressofuso UNI 5076, verniciato con polvere termoindurente poliestere, con goniometro graduato per un corretto puntamento del fascio luminoso. Verniciatura: di tipo poliestere eseguita a polvere, resistente agli agenti atmosferici e alla corrosione e garantita per 1.000 ore in nebbia salina. Colore Nero RL 9005. Schermo: vetro temperato di spessore 4mm resistente agli shock termici e agli urti. Sorgente: LED Mantenimento del flusso luminoso minimo al 70%: 80.000h (L70B20) per l 80% dei LED. Temperatura di colore: 0K; altre temperature di colore a richiesta. Protezione alle sovratensioni: a richiesta versione con protezione maggiorata contro gli impulsi aggiungendo il cod. RO0640/N. Driver: LED Minispluga: incorporato Fattore di potenza 0,95. LED Sluga - LED Maxispluga: Philips incorporato Conforme alla Norma IEC 61000-4-5. Fattore di potenza: 0,98 richiesta protezione alle sovratensioni: Protezione da sovratemperature soluzione ottimale anche con condizioni atmo- Over temperature protection With LED Spluga serie you are never left in the dark, thanks to an over-temperature protection device that adjusts luminous flux output based on room temperature and appliance, providing an excellent solution also with particularly critical atmospheric conditions. richiesta - On demand 0-10V DLI DYN control WIRELESS Norme di riferimento Standard reference EN60598-1 EN60598-2-1 EN62471 EN62031 EN60598-2-5 EN61547 Range of LED luminaires to light up urban areas. Suitable for roads, car parks and residential areas lighting. Installation: on pole with Ø60mm spigot or on vertical and horizontal surfaces (with mounting accessories) Body and frame: made by UNI 5076 die-cast aluminum, coated with polyester thermoset powder. Pole entrance: made by UNI 5076 die-cast aluminum, coated with polyester thermoset powder, with graduated goniometer to allow the correct orientation of light beam. Coating: coated with powdered polyester, resistant to atmospheric agents, corrosion and guaranteed for 1.000 hours in saline mist. Black RL9005 color. Shield: tempered glass with 4mm thickness resistant to thermal shocks and collisions. Light source: LED Maintenance of minimum luminous flux to 80%: 80.000h (L70B20) for 80% of LED. Color temperature: 0K; other color temperatures available on demand Protection against overvoltages: on request this version with greater protection against pulses by adding LED Spluga, Minispluga and Maxispluga code RO0640/N. Driver LED Minispluga: included Power factor 0,95. LED Spluga - LED Maxispluga: Philips included Conforming to IEC 61000-4-5. Power factor: 0,98 On demand surge protection: differential mode 8kV (L-N) standard mode 6kV (L - G/V, N-G/V, L&N-G/V). 51
LED Spluga LED Maxispluga LED Minispluga 52
LED Minispluga rredo urbano / Illuminazione stradale - Urban light / Street light 220-240 Vac +40 +50 110 a richiesta 50/60 CRI a richiesta Vac on demand Hz IP66 IK10 >70-20 -20 on demand 0,37m 2 75 driver included RG0 LOW FLICKER 220 535 355 colour W LED Optic K nominal lm tc = 25 C lm output lm/w * pcs Kg CELL Euro N 35 Led SMD ST 0 4900 3800 110 1 4,00 34403-5 180,00 Ø 60 LED Spluga N 50 Led SMD ST 0 7000 6000 120 1 4,00 34405-5 220,00 * 220-240 Vac +40 +50 110 a richiesta 50/60 CRI a richiesta Vac on demand Hz IP66 IK10 >70-20 -20 on demand 0,37m 2 driver included RG0 LOW FLICKER 630 250 75 Ø 60 nominal lm lm colour W LED Optic K lm/w * pcs Kg CELL Euro tc = 25 C output N 75 Led SMD ST 0 10500 8250 110 1 6,80 34-5,00 N 75 Led SMD ST 5000 10500 8250 110 1 6,80 34/5000-5,00 N 75 Led SMD 50 0 10500 8250 110 1 6,80 34/50/75-5,00 N 75 Led SMD 0 10500 8250 110 1 6,80 34/90/75-5,00 N 75 Led SMD SY 0 10500 8250 110 1 6,80 34/S/75-5,00 N 95 Led SMD ST 0 13 10500 110 1 6,80 36-5 350,00 N 95 Led SMD ST 5000 13 10500 110 1 6,80 36/5000-5 350,00 N 95 Led SMD 50 0 13 10500 110 1 6,80 36/50/95-5 350,00 N 95 Led SMD 0 13 10500 110 1 6,80 36/90/95-5 350,00 N 95 Led SMD SY 0 13 10500 110 1 6,80 36/S/95-5 350,00 * 53
cd/klm rredo urbano / Illuminazione stradale - Urban light / Street light LED Maxispluga 220-240 Vac +40 +50 110 a richiesta 50/60 CRI a richiesta Vac on demand Hz IP66 IK10 >70-20 -20 on demand 0,37m 2 driver included RG0 LOW FLICKER 780 100 280 555 colour W LED Optic K nominal lm tc = 25 C lm output lm/w * pcs Kg CELL Euro N 120 Led SMD ST 0 16800 13200 110 1 9,40 37-5,00 N 140 Led SMD ST 0 19600 15500 110 1 9,40 38-5,00 N 210 Led SMD ST 0 28800 21250 110 1 9,40 39-5 480,00 Ø 60 * Ottiche di serie - Standard optics 80 240 320 150 600 80 240 320 100 200 750 500 ST/CDL Stradale - Street optic 50 Intermedio - Medium Diffondente - Wide SY simmetrico - symmetric Ottiche a richiesta - Optics on request 54 150 600 750 ciclabile for roads with cycle tracks 100 200 500 for large roads 150 600 750 for lighting in parks 80 240 320 zione merci for ar parks and handling goodsa
LED Minispluga - LED Spluga - LED Maxispluga ccessori non inclusi - Not included accessories 239 263 155 Code: RO0640/N Euro: 20,00 Limitatore di sovratensione Surge protector Category: C2 Livello: medio - Level: Medium Voltage: 10kV Corrente: 5 - Current: 5 LED Minispluga Cod. Euro: 6,15 Bracket for wall application LED Spluga - LED Maxispluga Cod. Euro: 8,80 Bracket for wall application Dimensions (mm) 133 LED Spluga - LED Maxispluga Cod. Euro: 10,50 Inclinazione laterale ± 80 Bracket for ceiling application. Lateral tilt ± 80 ± 80 The accessory Cod. 703955.0101 (bracket for ceiling application) allows the installation LED Spluga and LED Maxispluga. 55
LED Minispluga - LED Spluga - LED Maxispluga Montaggio - Mounting Orientabilità - djustability Dettagli - Details B L N nti-condensate device: incluso Included IP66 2-pole connector for electrical connection 56
PLI - richiesta - POLES - On demand Palo cilindrico realizzato in acciaio S2354JR (UNI EN 10219) zincato a caldo di 4mm di spessore, Ø 60mm. Verniciatura eseguita a polvere di poliestere. Predisposto con foro per l ingresso del cavo di alimentazione. Finestra di ispezione (132x38mm) con coperchio IP54 incluso. Morsettiera doppio isolamento inclusa. Colorazione e altezza a richiesta Cylindrical pole in S2354JR steel (UNI EN 10219) hot galvanised, 4mm thick, Ø 60mm. With powder polyester coating. With hole to thread in supply cable. Inspection window (132x38mm) with IP54 cover included. Double-insulated terminal board included. Pali interrati (consegna 45/60 giorni dalla conferma dell ordine) Ø 60mm - Finestra di ispezione (132x38mm) con coperchio IP54 incluso. Morsettiera doppio isolamento inclusa. - Inspection window (132x38mm) with IP54 cover included. Double-insulated terminal board included 500mm Pali con piastra di base (consegna 45/60 giorni dalla conferma dell ordine) Ø 60mm - Finestra di ispezione (132x38mm) con coperchio IP54 incluso. Morsettiera doppio isolamento inclusa. - Inspection window (132x38mm) with IP54 cover included. Double-insulated terminal board included 57