SB Spare parts list Hydraulic breakers 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
SB Contents Contents General information................................................................ Spare parts list..................................................................... Optional parts.................................................................. 0 Bushing oversize, complete.................................................... 0 Restrictor, complete........................................................... Tightening torque................................................................. Working tools..................................................................... Accessories....................................................................... Optional equipment............................................................. Hydraulic hoses................................................................ Kits............................................................................... Label kit....................................................................... Seal kit........................................................................ 9 Lower hammer part kit......................................................... 0 Accumulator repair kit.......................................................... Dimensions....................................................................... 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
SB Spare parts list General information This spare parts list applies to the following: 0 000 0 Hydraulic breaker SB Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions! 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
Spare parts list SB Spare parts list 0 9 9 9 9 0 9 0 0 9 0 9 0 0 9 0 9 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
SB Spare parts list No. Remark Quantity () Breaker body Bushing, complete Bushing Scraper ring Oring Stop ring Plug Hexagon socket plug For mor bushings, see section "Bushing oversize, complete". ø mm ø.9 in.. x mm. x 0. in. (90 shore) VSTI R ED 9 0 00 0 0 9 9 00 0 000 09 0 0 9 0 Water nozzle, option Lock pin Spring pin, option Tool retainer Lock buffer Hexagon socket plug VSTI R ED 9 00 90 00 00 9 0 00 9 00 0 0 9 0 Coil spring Diaphragm support Diaphragm Accumulator house Hexagon socket screw Hexagon socket plug Screw with extra high fatigue strength. VSTI R ED 9 00 9 00 90 00 00 0 9 0 0 (9) Seal ring Oring Charge valve Oring Parallel pin Nipple, complete. x. mm 0. x 0.09 in.. x. mm 0.9 x 0.09 in. D x mm UN G A 90 0 0 0 00 0 00 0 00 00 0 00 00 000 0 9 0 (9) 9 0() Nipple Seal ring Oring Cap Valve cover Oring Control valve Seal ring Plug Pressure relief valve, complete Pressure relief valve Oring Oring Restrictor standard, complete Oring Oring Restrictor. x. mm 0.9 x 0.0 in.. x mm. x 0. in.. x. mm 0. x 0.0 in. 0. x. mm 0. x 0.0 in. For more restrictors, see section "Restrictor, complete". 0. x. mm 0. x 0.0 in.. x. mm 0. x 0.0 in. ø. mm ø0.0 in. 0 0000 0 0 90 0 00 000 9 0 00 0 90 99 00 0 0900 00 00 0 00 0 90 0 0 90 0 9 0 90 0 0 90 0 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
Spare parts list SB No. Remark Quantity Grease nipple ISO R 0 00 9 0 () 9(0) 0 Wiper Piston rod seal Oring Oring Liner Oring Piston Piston rod seal Back head Check valve, complete Check valve Valve rubber Hexagon head screw Base plate, option Set of eight screws, complete Screw Nut x mm.9 x 0. in. (90 shore). x. mm.9 x 0.0 in. (90 shore). x mm. x 0. in. (90 shore) M x 0 mm. fzb M x mm. fzb M 0 9099 0 00 0 0 0 9 00 0 00 9 00 0 00 99 00 0 00 0 0 0 00 9 90 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
SB Spare parts list 0 Atlas Copco Construction Tools AB No. 900 00 0f 00 9
Spare parts list SB Optional parts Bushing oversize, complete 0 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
SB Spare parts list No. Remark Quantity () () Bushing oversize, complete Bushing Scraper ring Oring Bushing oversize, complete Bushing Scraper ring Oring Ø. mm Ø.0 in. 9. x mm. x 0. in. Ø mm Ø.0 in. 9. x mm. x 0. in. 9 0 00 0 0 9 00 0 0 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
Spare parts list SB Restrictor, complete 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
SB Spare parts list No. Remark Quantity () () Restrictor, complete Oring Oring Restrictor Restrictor, complete Oring Oring Restrictor 0. x. mm 0. x 0.0 in.. x. mm 0. x 0.0 in. Ø. mm Ø0. in. 0. x. mm 0. x 0.0 in.. x. mm 0. x 0.0 in. Ø.0 mm Ø0. in. 9 9 0 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
Spare parts list SB Tightening torque No. Tightening torque Remark Hexagon socket plug 0 Nm LOCTITE Hexagon socket plug 0 Nm LOCTITE 9 Hexagon socket screw 0 Nm Molycote 0 Hexagon socket plug 0 Nm Charge valve 0 Nm Nipple 0 Nm Pressure relief valve 0 Nm Restrictor 0 Nm Grease nipple 0 Nm Check valve 0 Nm LOCTITE Hexagon head screw 0 Nm Molycote Nut 00 Nm LOCTITE is a regisrered trademark of Henkel Corporation. is a trademark of Henkel Corporation. Molycote is a registrered trademark of Dow Corning Corporation. 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
SB Spare parts list Working tools 9 0 Ø Ø Ø Ø 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
Spare parts list SB W L L T Metric No. W (mm) L (mm) L T (mm) Wt (kg) 9 0 Moil point Moil point (Xprofile) Chisel (cross) Chisel (Xprofile) Blunt tool Wide chisel (cross) Wide chisel (parallel) Asphalt cutter (cross) Asphalt cutter (parallel) Shaft Tamping pad (square) Post driver pad (round) Pile driver pad (round) Bushing pad (round) 0 0 0 Ø 00 Ø 00 Ø 0 Ø 90 0 90 0 0 90 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 90 90 0. 0.0..9 0.0. 9......... 0 9 00 0 9 0 09 0 0 0 00 0 09 09 0 00 0 00 0 00 0 00 0 00 0 00 0 00 00 00 00 Imperial No. W (in.) L (in.) L T (in.) Wt (lb) 0 Moil point Moil point (Xprofile) Chisel (cross) Chisel (Xprofile) Blunt tool Wide chisel (cross) Wide chisel (parallel) Asphalt cutter (cross) Asphalt cutter (parallel) Shaft Tamping pad (square) Post driver pad (round) Pile driver pad (round) Bushing pad (round).9.9.9.9.9.9.9.. Ø. Ø.9 Ø.9 Ø. 9. 9.9 9. 9. 9.9. 9.. 9... 9.0 9.0 0.0 9. 0.0 0.0 9..90 0.0.90 0.0.90.90 9.9 9.9 0.0..0...0.9..9 0..9.9...0... 9.0 0 9 00 0 9 0 09 0 0 0 00 0 09 0 00 09 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 00 00 00 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
SB Spare parts list Accessories Optional equipment Remark Quantity Grease gun Chisel paste cartridge ContiLube II micro Welding kit, universal Hose kit, universal Chisel paste cartridge Filling device Filling adapter Filling device Chisel paste container Chisel paste container Filling device for accumulator Nipple, for charging the accumulator Filling hose, for charging the accumulator Bushing wear controller For manual greasing with cartridge, 00 g (0. lb) 00 g x 0. lb x For ContiLube II micro For ContiLube II micro 0 g x 0. lb x For the 0 g (0. lb) Chisel paste cartridges, to use in combination with Chisel paste container kg ( lb) For the 0 g (0. lb) Chisel paste cartridges, suitable with the filling device for kg ( lb) and kg (99 lb) For the 0 g (0. lb) Chisel paste cartridges, to use in combination with Chisel paste container kg (99 lb) kg lb kg 99 lb 0909 0 00 099 90 0 0 0 09 9 9 0 0 9 00 0 90 09 9 9 0 00 Hydraulic hoses Remark Quantity Hose Hose Hose Additional fitting kit I.D. (0. in.), both ends M x. mm conical seal, length,00 mm (9 in.) I.D. (0. in.), both ends M x. mm conical seal, length,000 mm (9 in.) I.D. (0. in.), both ends M x. mm conical seal, length,00 mm (9 in.) Needed to fit two hoses to the hydraulic breaker 0 99 9 0 090 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
Spare parts list SB Kits Label kit No. Remark Quantity () Label kit Sound power label Product label Safety label Product label Safety label AEM sign "SB " "Atlas Copco" 90 9 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
SB Spare parts list Seal kit Remark Quantity Seal kit Scraper ring Oring Seal ring Seal ring Oring Oring Seal ring Oring Oring Seal ring Oring Oring Wiper Piston rod seal Oring Piston rod seal Oring Valve rubber Oring Oring Plug. x mm. x 0. in. (90 shore). x. mm 0. x 0.09 in. (0 shore). x. mm 0.9 x 0.09 in. (90 shore). x. mm 0.9 x 0.0 in. (90 shore). x mm. x 0. in. (90 shore). x. mm 0. x 0.0 in. (90 shore) 0. x. mm 0. x 0.0 in. (90 shore). x mm. x 0. in. (90 shore) x mm.9 x 0. in. (90 shore). x. mm PUR. x 0.0 in. PUR (90 shore) 90 90 00 0 0 9 0 000 90 0 0 0 00 0 00 0 0000 0 0 90 0 0 0 0900 0 90 0 0 90 0 0 9099 0 00 0 00 0 00 0 0 00 0 90 0 0 00 00 0 Atlas Copco Construction Tools AB No. 900 00 0f 00 9
Spare parts list SB Lower hammer part kit 9 9 0 0 No. Remark Quantity (,0) () 9 0 Lower hammer part kit Bushing, complete Bushing Scraper ring Oring Stop ring Lock pin Tool retainer Lock buffer Chisel paste cartridge 00 g 0 9 0 9 00 0 0 9 9 00 90 00 0 00 9 00 0 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
SB Spare parts list Accumulator repair kit Remark Quantity Accumulator repair kit Coil spring Diaphragm support Diaphragm Hexagon socket screw Hexagon socket plug Seal ring Oring Charge valve Oring Parallel pin Screw with extra high fatigue strength. VSTI R /ED. x. mm (0 shore). x. mm (90 shore) D x 90 9 00 9 00 90 00 0 9 0 0 90 0 0 0 00 0 00 0 00 00 0 00 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
Spare parts list SB Dimensions mm (inch) (.) (.) (.) (.) 0 (0. rad) (0. rad) 0 (.) 0 (.) Ø (Ø.) (.) (.) (.) (.) 00 (.9) (.) 9 (.) (.) (.) 0 () (.) (.) (.) (.) Ø(0.) (x) (.) 9 (.) (9.) 0 Atlas Copco Construction Tools AB No. 900 00 0f 00
Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. 0 Atlas Copco Construction Tools AB No. 900 00 0f 00 www.atlascopco.com