HP HP0-698 Supporting the HP ProLiant Storage Server Product Family https://killexams.com/pass4sure/exam-detail/hp0-698
QUESTION: 1 What does Volume Shadow Copy provide?. A. backup to disks B. LUN duplication C. point in time copies D. data replication to a remote site QUESTION: 2 What does network interface controller (NIC) teaming provide? Select TWO. A. fault tolerance B. better data protection C. IP support on Fibre Channel D. higher throughput E. IP support on SCSI Answer: A, D QUESTION: 3 An online spare CANNOT be assigned to which RAID level? A. 0 B. 1 C. ADG D. 5 Answer: A QUESTION: 4 Which protocol is used for network file and print level access in a Microsoft environment? A. Network File System B. Server Message Block C. Sequenced Packet Exchange D. Network Transfer File System
QUESTION: 5 In which security environments can HP ProLiant Storage Servers be deployed? Select THREE A. Active Directory Domain B. Unix Directory Service C. Windows NT Domain D. RADIUS Domain E. Workgroup F. Network Information Services Plus Answer: A, C, E QUESTION: 6 HP ProLiant Storage Server "multiprotocol support" means the support of. A. IP on 10Mb, 100Mb and 1Gb Ethernet B. NFS, FTP, SMB, etc. for client access C. SCSI, FC, FTP etc. for storage access D. WebUI, ilo and command line interfaces QUESTION: 7 The domain controller configuration functions are missing on an HP ProLiant Storage Server and the customer complains about the incomplete operating system installation. How can the problem be solved? A. HP ProLiant Storage Servers provide simultaneous support for multiple domains, but cannot be domain members. An additional server is required. B. Domain controller functionality is excluded from HP ProLiant Storage Server software by default. Installation of the DC feature pack is required. C. Domain controller functionality is disabled on single HP ProLiant Storage Servers. A cluster configuration is required. D. The Windows Storage Server operating system does not support domain controller functionality. An additional server is required. QUESTION: 8
You logged in to Remote Desktop twice, finished, and closed the browser window using the "close window button" (x). You cannot access Remote Desktop. Why? A. Administrator account is already in use. Try later. B. Login process is terminated. Process must be restarted. C. Connection is blocked. Target system must be disconnected. D. Sessions were improperly exited. Processes must be terminated. QUESTION: 9 If an NC7771 NIC is teamed with the embedded NC7761 NIC in an HP ProLiant ML370 G4 Storage Server, jumbo frames do NOT function. Why? A. The function is not implemented on the NC7771 NIC. B. The function is disabled on the NC7771 NIC by default. C. NIC teaming always disables the function on the associated NICs. D. Teaming with the NC7761 NIC disables the function on the NC7771 NIC. QUESTION: 10 A customer complains that a new ProLiant ML350 storage server was deployed without a monitor, keyboard, and mouse. Which answer is correct? A. Storage servers are exclusively designed for remote management and are not equipped with monitor, keyboard, and mouse connectors. B. A monitor, keyboard, and a mouse are essential for storage server management and are components of the standard equipment. C. Storage servers are designed for local or remote management, but can be deployed without a monitor, keyboard, and mouse. D. A monitor, keyboard, and a mouse are essential for storage server management, but must be ordered separately. QUESTION: 11 What must be done after replacing a CMOS battery on an ML370? A. Wait 4 hours to charge the battery. B. Reconfigure the system ROM.
C. Flush the cache to disk. D. Delete the cache before connecting storage. QUESTION: 12 Which slot type should be used for an SA6400 array controller? A. 3.3 V PCI or PCI-X slot B. 3.3 V PCI express slot C. second slot of the first PCI bus D. first slot of the tertiary bus Answer: A QUESTION: 13 What should you do before replacing any disk drive in an array? A. Remove the associated spare disk. B. Format the disk before you remove it. C. Document array and partition information. D. Disable access to the associated logical drives. QUESTION: 14 Which standard HP ProLiant Storage Server models do NOT have the data volumes preconfigured at the factory or by the Quick Restore DVD? A. all 1x0 models B. all 3x0 and 5xx models C. all DL models D. all ML models QUESTION: 15 The operating system of an HP ProLiant Storage Server is corrupted and cannot be booted. What is the recommended method to start the system recovery?
A. Boot the server from the latest full backup tape. B. Reinstall the operating system from the MS WSS DVD set. C. Recover the factory default image using the Quick Restore DVD. D. Replace the system board and then try to reboot the server. QUESTION: 16 How can you generate an Array Diagnostics Utility report without an operating system running? A. Boot from the Smart Start CD. B. Press the F2 key during power on. C. Boot from the Quick Restore DVD. D. Force a crashdump. Answer: A QUESTION: 17 If you disable shadow copies on a NAS volume, existing shadow copies. A. are deleted, but can be restored B. remain usable on the volume C. are deleted and cannot be restored D. remain on the volume, but are disabled QUESTION: 18 You check disk space utilization of a volume with disk quota enabled and discover that a user has exceeded the limit. What must you do to prevent users from exceeding the quota in the future? A. Delete some files in the user directory. B. Compress the files in the user directory. C. Deny disk space to users exceeding quota limit. D. Delete and recreate the user account and directory. QUESTION: 19
What must be installed before upgrading an ML110 Storage Server with a RILOE II board? A. Advanced System Management Driver B. Array Configuration Utility C. Array Diagnostic Utility D. HP Proactive Services Driver Answer: A QUESTION: 20 Pressing the Power On/Standby button on a running DL380 Storage Server. A. completely removes system power B. does not completely remove system power C. invokes the operating system standby mode D. has no effect if the operating system is running QUESTION: 21 The Array Diagnostic Utility shows the message "Controller Is Not Configured" on an HP ProLiant DL380 Storage Server. What should you run? A. LightPulse Utility B. Array Configuration Utility C. StorageWorks Command Console D. Fibre Channel Diagnostics Utility QUESTION: 22 Click the Exhibit button. You launch the disk management utility on an HP ProLiant DL100 Storage Server (standard configuration) and find the fault tolerance set to "No" for all logical disks. Why?
A. Disk partitions are corrupted and fault tolerance is lost. B. With write-back caching disabled, the RAID controller lost fault tolerance. C. RAID controller LUNs are interpreted as disks with no fault tolerance. D. All disks are connected to a single SATA bus which is not fault tolerant. QUESTION: 23 What should you consider when installing a non-hot-plug SCSI drive? A. You can mix hot pluggable and non hot pluggable drives on the same bus. B. It can only be used as a BOOT device. C. It cannot be used as a BOOT device. D. Do not install the drive together with hot-plug drives on the same bus.
QUESTION: 24 Using a shadow copy of the original folder, a user corrects some errors in a document and then cannot save the file because shadow copies. A. are virtual copies of files and folders B. are read only copies of files and folders C. are write enabled for administrators only D. lose the link to the original file when changed QUESTION: 25 You created and formatted a new partition or dynamic volume on a NAS disk. What must you do next? A. Run the disklabel utility. B. Assign a drive letter or mount point. C. Enable a signature to be written to it. D. Downgrade to a Basic disk. QUESTION: 26 To obtain a uniform drive speed in a protected RAID array behind a SMART controller, you must replace two disk drives. What is the recommended procedure? A. There is no procedure for dual disk drive replacement in a single protected RAID array. B. Replace one drive and allow it to completely rebuild before replacing the second drive. C. Disable the array, replace the two disk drives simultaneously, and re-enable the array to start the rebuild. D. Insert the new drives in two free bays, copy the contents of the associated old drives to them, and then remove the old drives. QUESTION: 27 An HP ProLiant Storage Server was restored using the Quick Restore DVD. What is a possible consequence?
A. Storage Server license expires at a later time. B. Disk drive letters may have changed. C. Network shares will be restored. D. MAC addresses are lost. QUESTION: 28 What ensures high availability and virtually unlimited storage scalability in a network attached storage solution? A. NSI Double Take software B. HP ProLiant Storage Server Gateway Edition C. iscsi Feature Pack D. Multiple HP ProLiant Storage Servers, interlinked with NIC teaming QUESTION: 29 How does HP support block level data access across the network? A. Network block level data access is enabled on all HP ProLiant storage server systems by default. B. To enable block level data access, install the iscsi feature pack. C. To enable block level data access, install the DAS feature pack. D. Block level data access is enabled when the NAS/SAN gateway software is running. QUESTION: 30 What enables IP based failover/failback of shares in a storage server environment with no SAN connections? A. HP OpenView Storage Mirroring software B. iscsi Feature Pack C. HP ProLiant Application Storage Manager D. clustering
Answer: A QUESTION: 31 What is the most cost efficient method to deploy storage in a multi-protocol environment? A. Use a separate HP ProLiant Storage Server for each protocol. B. Use the HP ProLiant Storage Server which supports the most commonly used protocols by default. C. Use a Unix based file server for Unix based protocols and HP ProLiant Storage Server for Windows based protocols. D. Configure one server providing Unix based protocols and another server providing Windows based protocols in a cluster. QUESTION: 32 An HP ProLiant Storage Server, which can act as a NAS to SAN gateway, is based on. A. OpenVMS B. HP-UX, optimized for file serving C. Windows 2000 Datacenter Edition D. Windows Storage Server 2003 QUESTION: 33 Which Windows 2003 operating system functionality CANNOT be installed on the HP ProLiant Storage Server? A. volume quotas B. volume shadow copy C. active directory controller D. distributed file system QUESTION: 34 A customer environment consists of branch offices and other remote locations without dedicated IT staff members. How do you most efficiently manage the storage
infrastructure? A. Preinstall identical standard HP ProLiant Storage Servers and distribute them among the different locations. B. Install HP ProLiant Storage Server systems at all locations and use standard remote deployment and management tools. C. Install identical standard HP ProLiant Storage Server systems at all locations and use remote replication software to propagate the operating system to the remote locations. D. Install HP ProLiant Storage Server systems at all locations and use third party remote console tools for system management. QUESTION: 35 Which HP ProLiant Storage Server model comes with preconfigured storage? A. DL380 B. ML370 C. ML110 D. DL580 QUESTION: 36 Which feature enhances the availability of file services on HP ProLiant Storage Servers? A. RAID 1 B. clustering C. Continuous Access D. dual processor system QUESTION: 37 Which protocol is required on the HP ProLiant Storage Server for block level storage access across the network? A. FTP B. NFS
C. SMB D. iscsi QUESTION: 38 Which HP ProLiant Storage Server models support iscsi feature pack software? A. all models B. DL 5x0 only C. all 3x0 only D. rack mountable only Answer: A QUESTION: 39 For which HP ProLiant Storage Servers are print services NOT supported by default? A. DL100-640GB B. ML110-320GB C. ML350-1.2TB D. DL380-SAN Gateway QUESTION: 40 A customer requires a high performance entry level solution with scalable storage capacity. What is the best HP ProLiant Storage Server product? A. DL100 B. DL580 C. ML110 D. ML370 QUESTION: 41 Which HP ProLiant Storage Servers can be integrated in a SAN environment? Select TWO.
A. DL100 B. ML110 C. DL380 D. ML350 E. DL580, E QUESTION: 42 hat should you consider before you populate two single port Gigabit Ethernet NICs in an HP ProLiant ML110 Storage Server? A. A single, dual ported 64 bit, 66 MHz Gigabit Ethernet NIC in a 64 bit, 66 MHz PCI-X slot provides higher bandwidth and the same availability. B. The two 32 bit, 33 MHz slots may reside on the same PCI bus and provide insufficient bandwidth for the two NICs. C. The two 32 bit, 33 MHz PCI slots, even if located on the same PCI bus, provide sufficient bandwidth for the two NICs. D. A populated 32 bit, 33 MHz PCI slot slows down all 66 MHz PCI-X options to 33 MHz, causing dramatic performance loss. QUESTION: 43 Which utility is required to access the standard internal RAID controller in HP ProLiant 1x0 Storage Server models for maintenance and monitoring purposes? A. Array Diagnostic Utility B. Windows Disk Manager C. Array Configuration Utility D. Adaptec Storage Manager QUESTION: 44 Which methods can you use to configure NIC teaming? Select TWO. A. RILO B. RBSU C. local attached D. WebUI E. NDMP
Answer: A, C QUESTION: 45 Which updates should NOT be installed with the automatic Windows update service (Software Update Service)? A. storage controller updates B. driver updates C. ProLiant Support Packs D. critical security updates QUESTION: 46 Which Windows Storage Server Edition is installed on an ML110 320 GB Storage Server? A. Web B. Enterprise C. Standard D. Express QUESTION: 47 Which tool is used to configure the MSA20 storage system? A. Array Configuration Utility B. Storage System Scripting Utility C. Command View MSA20 D. Windows Disk Manager Answer: A QUESTION: 48 What is needed to use the Remote Desktop feature of the ilo port? A. RapidLaunch utility B. the Remote Desktop connection within RBSU
C. a dedicated management network D. an additional license QUESTION: 49 Which components are recommended for a DL380 Storage Server cluster solution running Windows 2003? Select TWO. A. one Cluster Kit for each node B. a Cluster Kit for the failover node C. a Cluster Kit for the primary node D. one local quorum disk for each node E. a minimum of two DL380 Storage Servers Answer: A, E QUESTION: 50 If you enable Software Update Services, which updates can be performed immediately? A. non-critical updates B. service packs C. critical security updates D. driver updates QUESTION: 51 Which HP ProLiant Storage Servers are equipped with the integrated lights-out functionality? A. DL100, ML110 B. ML110, ML350, ML370, DL380 C. ML350, ML370 D. ML370, DL380, DL580, DL585 QUESTION: 52
QUESTION: 52 Which SCSI, RAID, and NIC standard configuration applies to HP ProLiant Storage Server DL585? A. SCSI, RAID, and NIC functionalities are integrated on the system board. B. SCSI and RAID functionalities are integrated on the system board. NIC uses a PCI-X slot. C. SCSI and NIC functionalities are integrated on the system board. RAID controller uses a PCI-X slot. D. RAID and NIC functionalities are integrated on the system board. SCSI adapter uses a PCI-X slot. QUESTION: 53 What is the Array Configuration Utility default login account? A. user: Administrator, password: Administrator B. user: administrator, password: administrator C. user: hpinvent, password: Administrator D. user: administrator, password: hpinvent QUESTION: 54 What is required to configure NIC teaming on an ML110 Storage Server? A. ML110 NIC teaming is not supported. B. Remote Desktop C. ilo license D. a second NIC QUESTION: 55 What does HP recommend for managing disks and volumes with the Disk Management Utility through WebUI? A. Use software RAID-based dynamic volumes for optimum efficiency. B. Format drives with NTFS for best support of shadow copies, encryption and compression. C. Format dynamic disks with FAT32 for easiest configuration in clusters. D. Span array controllers with dynamic volumes for best load balancing.
QUESTION: 56 Insight Manager agent installation and use on ProLiant Storage Servers is optional. What is the result if it is NOT installed? A. loss of "pre-failure warranty" for processors, hard drives, memory modules B. incomplete system, application and security event log files C. enhanced operating system stability and application performance D. less restrictive handling of minor hardware errors and revision mismatches Answer: A QUESTION: 57 Which Windows Storage Server Edition ships with the DL380 (SCSI)? A. Express B. Web C. Standard D. Enterprise QUESTION: 58 Which Windows Storage Server Edition supports clustering? A. Standard B. Web C. Enterprise D. Express QUESTION: 59 Which HP ProLiant Storage Server model DOES NOT support ilo or RILOE II functionality? A. DL100 B. DL580 C. ML110
D. ML350 Answer: A QUESTION: 60 What must you consider before installing a Microsoft Service Pack for Windows Storage Server on an HP ProLiant Storage Server? A. Installing the appropriate HP patches instead avoids software compatibility problems. B. The Software Update Service, if enabled, initiates the automatic Service Pack installation. C. The Service Pack must be tested for HP ProLiant Storage Servers and compatible with the configuration according to the HP NAS update website. D. Installing a Service Pack on a standalone HP ProLiant Storage Server requires a system disk failover and failback.
For More exams visit https://killexams.com Kill your exam at First Attempt...Guaranteed!