General Specifications Cables R3 GENERAL This General Specification (GS) covers the specifications of cables, signal cables and communication cables used in the buses (V net, RIO bus, and VL net) which configure the network of the CENTUM CS 3000 and CENTUM CS 1000 system. CABLE CHARACTERISTICS Item V net (10BASE5) V net (10BASE2) RIO bus VLnet Cable type Coaxial cable Coaxial cable Twisted pair cable Coaxial cable Cable connector N type BNC Solderless lug held in place with M4 screws BNC Minimum bending radius (mm) 100 50 100 50 T01E.EPS MODELS AND SUFFIX CODES V net Cable (10BASE5 cable) (*1) YCB111 V net Cable (10BASE5 cable) - M003 Cable Length 2.5 m - M005 - M008 Cable Length Cable Length 5 m 7.5 m -M Enter a multiple of 5 in (Cable is provided every 5 m). Max. cable length 500 m (Suffix code: -M500) *1: A term from Ethernet 10BASE5 is used to show wire size of V net cable simply. V net specifications differ from Ethernet specifications. Use this Yokogawa-specified cable. T02E.EPS V net Cable, VL net Cable (10BASE2 cable) (*1) YCB141 V net Cable, VL net Cable (10BASE2 cable) -M001 -M002 -M005 -M010 -M Cable Length 1 m Cable Length 2 m Cable Length 5 m Cable Length 10 m Enter a multiple of 5 in (Cable is provided every 5 m). Max. cable length 185 m (Suffix code: -M185) *1: A term from Ethernet 10BASE2 is used to show wire size of V net cable simply. V net specifications differ from Ethernet specifications. Use this Yokogawa-specified cable. T03E.EPS V net Terminator (for 10BASE5 cable) YCB118 V net Terminator (for 10BASE5 cable. Conforms to CE MARK) T04E.EPS Yokogawa Electric Corporation 2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan Tel: 81-422-52-5634 Fax: 81-422-52-9802 Copyright Jan. 2001 5th Edition Apr.01,2005
2 V net, VL net Terminator (for 10BASE2 cable) YCB148 V net, VL net Terminator (for 10BASE2 cable. Conforms to CE MARK) T04E-1.EPS V net Grounding Unit YCB117 V net Grounding Unit (for 10BASE5 cable. Conforms to CE MARK) T05E.EPS RIO bus Cable YCB121 RIO bus Cable (Conforms to CE MARK) Suffix Code -M Enter Cable Length in every 1 m. Max. Length 750 m (up to -M750) Option Code /NL Supports Non-Incendive instrumentation T06E.EPS RIO bus Terminator YCB128 RIO bus Terminator (Conforms to CE MARK) T07E.EPS Control bus T-shaped Connector (for HIS) YCB146 Control bus T-shaped Connector (for HIS) T08E.EPS Control bus Conversion Unit YCB149 Control bus Conversion Unit T09E.EPS Control Bus Cable Conversion Adapter YCB147 Control Bus Cable Conversion Adapter -2 2-connector type -4 4-connector type Option Code /BR General-purpose Rack Mountable Type T10E.EPS Jan.22,2001-00
3 V net Coupler Cable AKB101 V net Coupler Cable (for ACG10S (Desktop Type)) -M003 Cable Length 2 m -M005 Cable Length 5 m -M010 Cable Length 10 m T11E.EPS Signal Cable for Auxiliary Voltage Output of Analog Input Module AKB301 Signal Cable for Auxiliary Voltage Output of Analog Input Module (Connects AMN11 and TE16 Terminal Block) -M Enter Cable Length in every 5 m. Max. Length 50 m (up to -M050) T12E.EPS SPBD Standby Manual Station Connection Cable AKB311 SPBD Standby Manual Station Connection Cable T13E.EPS Signal Cable KS1 (*1) Signal Cable (40-40 Pins) (for connection between AMC80 and signal conditioner nest) KS2 (*1) Signal Cable (40-40 Pins) (for connection between AMM12C, ADM 1C and terminal board) KS3 Signal Cable (40-37 Pins) (for connection between AMM12C, ADM 1C and KCN socket) s KS8 (*1, *2) Signal Cable (50-50 Pins) (for connection between AMM32C and terminal board) KS9 (*1) Signal Cable (50-50 Pins) (for connection between ADM 2C and terminal board) KS10 Signal Cable (50-50 Pins) (for connection between ADM 2C and KCN1 socket) -01 Cable Length 1 m -02 Cable Length 2 m -03 Cable Length 3 m -05 Cable Length 5 m -07 Cable Length 7 m -10 Cable Length up to 10 m -15 Cable Length up to 15 m -20 Cable Length up to 20 m -25 Cable Length up to 25 m -30 Cable Length up to 30 m -35 Cable Length up to 35 m -40 Cable Length up to 40 m -45 Cable Length up to 45 m -50 Cable Length up to 50 m *A Style A (*4) Style Code *B Style B (*5) Option Code /NL Supports Non-Incendive instrumentation (Only KS1, KS2, KS8 and KS9 applied) *1: Use under the temperature environment (-20 to 70 C). *2: KS8 cable length: 2m and 5m are available. *3: Use under the temperature environment (-20 to 60 C). *4: For KS3 and KS10. *5: For KS1, KS2, KS8 and KS9. T14E.EPS Apr.01,2005-00
4 Socket (Used with KS3 Cable) KCN Socket (Used with KS3 Cable) T15E.EPS Socket (Used with KS10 Cable) KCN1 Socket (Used with KS10 Cable) T16E.EPS RS-232C Modem Cable for Start-Stop Asynchronous Communication (for ACM11, ACM21) KB3 RS-232C Modem Cable for Start-Stop Asynchronous Communication (DB25-DB25 malepins) (for connection between ACM11/ACM21 and modem) -02 Cable Length 2 m -05 Cable Length 5 m -10 Cable Length 10 m -15 Cable Length 15 m Style Code *B Style B Note: If a RS-232C interface circuit at the partner equipment is insulated, use an AKB141 cable. T17E.EPS RS-232C Null Modem Cable for Start-Stop Asynchronous Communication (for ACM11, ACM21) KB4-02 Cable Length 2 m -05 Cable Length 5 m -10 Cable Length 10 m -15 Cable Length 15 m RS-232C Null Modem Cable for Start-Stop Asynchronous Communication (25-25 male pins) (for connection between ACM11/ACM21 and RS-232C device) Note: If a RS-232C interface circuit at the partner equipment is insulated, use an AKB142 cable. RS-232C Modem Cable for Start-Stop Asynchronous Communication (for ACM11, ACM21) T18E.EPS AKB141 For Connecting RS Circuit Isolated Devices RS-232C Modem Cable for Start-Stop Asynchronous Communication (DB25 - DB25 malepins) (for connection between ACM11/ACM21 and modem) -M002 Cable Length 2 m -M005 Cable Length 5 m -M010 Cable Length 10 m -M015 Cable Length 15 m T19E.EPS Jan.22,2001-00
5 RS-232C Null Modem Cable for Start-Stop Asynchronous Communication (for ACM11, ACM21) AKB142 For Connecting RS Circuit Isolated Devices RS-232C Null Modem Cable for Start-Stop Asynchronous Communication (DB25 -DB25 male pins) (for connection between ACM11/ACM21 and RS-232C device) -M002 Cable Length 2 m -M005 Cable Length 5 m -M010 Cable Length 10 m -M015 Cable Length 15 m T20E.EPS RS-232C Null Modem Cable for Start-Stop Asynchronous Communication (for ACM11, ACM21) AKB143 RS-232-C Null Modem Cable for Start-Stop Asynchronous Communication (DB25-DB9 male pins for connection between ACM11/ACM11and FA-M3, RS-232C device) -M002 Cable Length 2 m -M005 Cable Length 5 m -M010 Cable Length 10 m -M015 Cable Length 15 m Note: To comply with EMC Standards, connect a ferrite code (A1179MN) to this cable. Order it separately. T21E.EPS RS-232C Null Modem Cable for Start-Stop Asynchronous Communication (for ACM11, ACM21) AKB144 RS-232-C Null Modem Cable for Start-Stop Asynchronous Communication (DB25-DB9 female pins for connection between ACM11/ACM21 and RS-232C device) -M002 Cable Length 2 m -M005 Cable Length 5 m -M010 Cable Length 10 m -M015 Cable Length 15 m T22E.EPS RS-422/RS-485 Cable (for ACM11, ACM12) AKB161 RS-422/RS-485 Cable (for connection between ACM12 and FA500) Suffix Code -M Enter Cable Length in in 5 m Units. Max. Length 100 m (up to -M100) T28E.EPS RS-422/RS-485 Cable (for ACM12 Communication Module) AKB162 RS-422/RS-485 Cable (for connection between ACM12 and YS) Suffix Code -M Enter Cable Length in in 5 m Units. Max. Length 100 m (up to -M100) T29E.EPS Sep.24,2003-00
6 Power Supply Cable for AC Power Supply (Nominal Diameter 5.5 mm 2 ) KP0 Power Supply Cable for AC Power Supply (Nominal Diameter 5.5 mm 2 ) -10 Cable Length up to 10 m -20 Cable Length up to 20 m -30 Cable Length up to 30 m -40 Cable Length up to 40 m -50 Cable Length up to 50 m T23E.EPS Power Supply Cable for AC Power Supply (Nominal Diameter 8.0 mm 2 ) KP1 Power Supply Cable for AC Power Supply (Nominal Diameter 8.0 mm 2 ) -10 Cable Length up to 10 m -20 Cable Length up to 20 m -30 Cable Length up to 30 m -40 Cable Length up to 40 m -50 Cable Length up to 50 m T24E.EPS Power Supply Cable for DC Power Supply (Nominal Diameter 22.0 mm 2 ) KP4 Power Supply Cable for AC Power Supply (Nominal Diameter 22.0 mm 2 ) -10 Cable Length up to 10 m -20 Cable Length up to 20 m -30 Cable Length up to 30 m -40 Cable Length up to 40 m -50 Cable Length up to 50 m T25E.EPS Grounding Cable KG0 Grounding Cable (for circuit grounding, between devices) -10 Cable Length up to 10 m -20 Cable Length up to 20 m -30 Cable Length up to 30 m -40 Cable Length up to 40 m -50 Cable Length up to 50 m T26E.EPS Fieldbus Terminator YCB138 Fieldbus Terminator (Conforms to CE MARK) T27E.EPS Jan.22,2001-00
7 KCN Socket (Used with KS3 Cable) KCN Socket KCN1 Socket (Used with KS10 Cable) KCN1 Socket KS3 Cable KS10 Cable Cabling Surface Panel Cutout Retaining Clip Side View F01E.EPS Cabling Surface Panel Cutout Retaining Clip Side View F05E.EPS 2-3.05f 0.05 63.50 0.15 58.7 0.4 Connector Panel 2-3.05f 0.05 61.11 0.15 56.6 0.2 Connector Panel 11.5 0.4 15.2 0.2 Min. 18 4-1.6 R 108 Min. 24 4-1.6 R 108 Min.25 Min.50 Unit:mm Pin Number Allocation (Connection Surface) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 F02E.EPS Min.25 Min.50 Unit:mm Pin Number Allocation (Connection Surface) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 33 F06E.EPS 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 F03E.EPS Specifications Number of Signals: 16 Terminal Type: Solder terminal Wiring: AWG #20, #22, #24 (cross sectional areas 0.2 to 0.5mm 2 ) Terminal Block Connection: TE16 Cable Used to Connect I/O Cards: KS3 cable Output Specifications: Voltage: Max. 60 V DC Current: Max. 0.2 A Input terminals: ST2,ST3,PB5 + A + A - B B - Output terminals: ST2,ST4 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 F07E.EPS Specifications Number of Signals: 32 Terminal Type: Solder terminal Wiring: AWG #20, #22, #24 (cross sectional areas 0.2 to 0.5mm 2 ) Terminal Block Connection: TE32 Cable Used to Connect I/O Cards: KS10 cable Output Specifications: Voltage: Max. 60 V DC Current: Max. 0.2 A Input terminals: ST5,ST6 + + A A - B B - Output terminals: ST5,ST7 F04E.EPS For inductive load, connect spark killer (RC network for AC, diode for DC) parallel to the load. F08E.EPS For inductive load, connect spark killer (RC network for AC, diode for DC) parallel to the load. Jan.22,2001-00
8 Bus Cables and Terminators Unit: mm YCB111 V net Cable (10BASE5 cable) YCB118 V net Terminator (for 10BASE5 cable) YCB141 V net Cable (10BASE2 cable) PFB701 VL net Cable ø5 YCB148 V net, VL net Terminator (for 10BASE2 cable) 24.0 14.5 ø14.5 Cable length YCB117 V net Grounding Unit (for 10BASE5 cable) Example of V net Grounding Unit in Use Grounding unit Vnet cable Grounding bar YCB121 RIO bus Cable YCB128 RIO bus Terminator Shield YCB146 Control bus T-shaped Connector (for HIS) 14.5 (Blue) (White) (Green) Power supply unit Terminator YCB149 Control bus Cable Conversion Unit 27.8 32.5 YCB147 Control Bus Cable Conversion Adapter YCB138 Fieldbus Terminator 10BASE2 cable 10BASE5 cable F09E.EPS Jan.22,2001-00
9 Signal Cable and Others Unit:mm AKB101 V net Coupler Cable (for ACG10S Desktop Type) AKB301 Cable for Auxiliary Voltage Output of Analog Input Module (connects AMN11 and TE16 Terminal Block) 45.1 80 44.4 38 43 32 KS1 Cable Connects AMC80 and SCN KS2 Cable Connects ADM 1C/AMM12C to MUB Terminal Board/TE16 Terminal Block 43 43 t=15 t=15 80 20-pair sheathed cable 80 16-pair sheathed cable 40 pin connector 40 pin connector 40 pin connector 40 pin connector KS3 Cable Connects ADM 1C/AMM12C to KCN Socket 46 43 t=14 t=15 70 80 16-pair sheathed cable 37 pin connector 40 pin connector KS9 Cable Connects ADM 2C to MUD Terminal Board/TE32 Terminal Block 40-core sheathed cable t=15 50 pin connector 50 pin connector 43 92 KS10 Cable Connects ADM 2C to KCN1 Socket 49 43 t=14 t=15 67 92 40-core sheathed cable 50 pin connector 50 pin connector F10E.EPS Mar.15,2001-00
10 Communication Cable KB3 RS-232C Modem Cable for Start-Stop Asynchronous Communication (for connection between ACM11 and modems) Red Marker Unit: mm KB4 RS-232C Null Modem Cable for Start-Stop Asynchronous Communication (for connection between ACM11 and RS-232C devices) Red Marker t=20 55 t=20 55 48 48 If a RS-232C interface circuit at the partner equipment If a RS-232C interface circuit at the partner equipment is isolated,use an AKB141 cable. is isolated,use an AKB142 cable. AKB141 For Connecting RS-Circuit-Isolated Devices AKB142 For Connecting RS-Circuit-Isolated Devices RS-232C Modem Cable for Start-Stop Asynchronous RS-232C Null Modem Cable for Start-Stop Communication Asynchronous Communication (for connection between ACM11 and modems) (for connection between ACM11 and Red Marker RS-232C devices) Red Marker 47 47 ACM CN1 47 55 ACM CN1 47 55 I=150mm M3 I=150mm M3 Cable Shield Cable Shield AKB143, AKB144 RS-232C Null Modem Cable for Start-Stop Asynchronous Communication (for ACM11, ACM21 Communication Module) 55 36.8 49 42 AKB161 Start-Stop Synchronized Communication RS-422/RS-485 Cable (for ACM12 Communication Module) Brown 10 20 30 40 Red Yellow 80 (M4 connector) Brown Red Yellow Bule 70 The other side (M3 connector) AKB162 Start-Stop Synchronized Communication RS-422/RS-485 Cable (for ACM12 Communication Module) L=005m to 100m (multiple of 5) Brown Brown 10 Red Red 20 30 Yellow 40 Yellow Blue 80 70 (M4 connector) The other side (M4 connector) F11E.EPS Sep.24,2003-00
11 ORDERING INSTRUCTION Specify model, suffix codes and style code. TRADEMARK CENTUM is a registered trademark of Yokogawa Electric Corporation. Other company and product names appearing in this document are trademarks or registered trademarks of their respective holders. Subject to change without notice. Sep.24,2003-00