PRODUCT Datasheet TECHNICAL FEATURES Processor: Freescale i.mx6 Series ARM Cortex A9 scalable multicore (single, dual, quad) Clock: 1,2 GHz per core Perfomance MIPS (Coremark): Solo: 1128 (0.94), Dual: 2532 (2.11), Quad: 3696 (3.08) RAM memory: from 512 MB up to 4 GB (2GB for SOLO) emmc (FLASH memory): from 2 GB up to 32 GB On-board peripherals: nr. 2 LVDS video channels (up to FullHD 1920x1080) with nr. 1 touch screen resistive type. nr. 1 RGB Parallel interface 24 bit (UXGA) with touch screen resistive type, nr. 1 HDMI ver. 1.4 port nr. 1 MIPI Display output direct connector nr. 1 MIPI CAMERA 5Mp input direct connector nr. 1 Audio Codec (Head/mic + Line in e Line Out) nr. 3 Sensors (MEMS Gyro 9 axis, Barometer and Altimeter) nr. 1 Real time clock with rechargeable Battery Backup nr. 1 Memory slot usd nr. 15 GPIO pin (up to 41 on carrier expansion connector) nr. 1 keyboard connector (up to 6 buttons) nr. 4 LED for system /User signal Communications interfaces: nr. 1 Giga Ethernet 10/100/1000 nr. 2 USB port Host/Device, nr. 1 USB port OTG nr. 2 UART, nr. 2 CAN, nr. 1 I2C, nr. 3xSPI, nr. 1 JTAG debug I/F nr. 1 WiFi 802.11, BLE, FM Radio Off-board peripheral : nr. 1 usd/sd memory, nr. 1 SATA-2 port (only for Quad version) nr. 2 USB additional ports nr. 1 PCI-express external bus expansion nr. 15-41 GP I/O Power supply: 6,5 30 Vcc +/- 10% Operating temp : -20 / +70 C (extended range -40/+85 C available in option ) Operating humidity: 0% - 90% relative humidity (not condensing) Mechanical size: 100 mm x 75 mm Form factor: pico ITX compatible
MECHANICAL DRAWING top side
MECHANICAL DRAWING front side LEDS INDICATORS General board indicators: D1 : System Life signal (Yellow colour) D2 : BlueTooth ON /emmc SD memory access (Blue colour) D3 : PowerON (Green colour) D4 : Health status (Red colour) ETHERNET port indicators: Left : 100Mb (green Colour) / 1Gb (Yellow Colour) Right : Link Presence (Yellow colour)
MECHANICAL DRAWING Assembly NOVAsom6 with Expansion Boards Expansion carrier/mother Board It is a generic expansion module that allows the integration of NOVAsom6 with customer s specific system. For a correct alignment with the expansion carrier/mother board, keep in mind that the measures related to connector J26 are referred to its symmetrical centre.
Expansion PIGGY-LCD board: It is the expansion module that allows the connection of NOVAsom6 to a generic LCD display (RBG 24 Bit parallel or MIPI I/F) by means of a dedicated cable/connector.
Expansion PIGGY-SER board: It is the expansion module that allows the connection of NOVAsom6 to standard serial communication field bus (RS232, CAN Bus, RS 485/RS422) with industrial DSUB9 connectors.
NOVAsom6 CONNECTORS Types and PCB Layout TOP SIDE BOTTOM SIDE
CONNECTORS List Description Ref Name Position Description/Function note J1 usd BOTTOM socket for usd memory Card It is in alternative with J2 J1 usd BOTTOM socket for usd memory Card It is in alternative with J2 J2 usd BOTTOM socket for usd memory Card It is in alternative with J1 J3 IR TOP Remote IR Detector J4 PWR TOP Power Supply input (6-30 Vdc) It is in alternative with J5 J5 PWR TOP Power Supply input (6-30 Vdc) It is in alternative with J4 J6 uusb BOTTOM USB - OTG Interface J7 USB-A TOP Dual USB type A interface J8 Console BOTTOM Serial RS232 interface J9 JTAG BOTTOM JTAG Debug interface J10 Audio TOP Line IN, Line OUT Audio interface J12 HDMI BOTTOM HDMI type A interface J13 ETH TOP Ethernet 1Gb interface J14 AUDIO-MIC TOP Audio-Microphone in interface J15 LVDS0 TOP LVDS interface with touch-screen and I2C J17 LVDS1 TOP LVDS interface with touch-screen and I2C J18 TOUCH BOTTOM Touch screen connector for LVDS J19 KEYBOARD BOTTOM KEYBOARD Android interface J20 SER1-I/O TOP CAN1, CAN2, Full UART and GPIO interface J21 SER2-I/O TOP SPI, I2C interface J22 WIFI-RF ANT TOP WIFI RF Antenna connector J23 WIFI-EXT TOP External WIFI-GPS-GSM Piggy connector J24 LCD-RGB-1 TOP LCD-RGB Piggy connector interface J25 LCD-MIPI-2 TOP MIPI Display -RGB Piggy connector interface J26 EXP BOTTOM Expansion connector for Carrier/mother board J27 MIPI-CAM TOP MIPI CAMERA Piggy Connector For detailed pin-out information and relative manufacturer part-numbers refer to product document NI240613-SP01.
PRODUCT VERSION Product Name Product Code Order Code NOVAsom6 NI240613-FS01 N6F NOVAsom7 NI240613-FS02 N7F NOVAsom7B NI240613-FS07 N7B NOVAsom8 NI240613-FS03 N8F NOVAsom6X NI240613-FSXX N6X NOVAsom7X NI240613-FSXX N7X NOVAsom8X NI240613-FSXX N8X CONFIGURATION Scalable functions (6,7,8) -X = Customer specific Configuration on request (lot> 100 pcs) Funzione/Features Audio Codec (HP, MIC, Line-in, Line out) ALIM 6-30V (power supply and connector on board) DD (ttl direct display ) connectors EMMC (flash memory 2GB) Giga Ethernet connector on board HDMI 1.2 connector Expansion Connector for CARRIER Keyboard (6 tasti + 2 led) connector LVDS (nr. 2 canali + 1 touch) MIPI RTC with battery backup SENSORS (accelerometer, magnetic, barometer) PIGGY EXP connector for SPI/I2C, UART/CAN, GPIO USB dual port on board WiFi peripheral on board µsd memory card (4 GB) Additional RAM (512MB) Single core (SOLO) Availability functionalities Grid (can be chosen to configuration a customized product) Dual core (DUAL) Dual Lite core (7B Version) Quad core (QUAD) Y Y Y-4GB Y Y Y Y-1ch Y Y Y Y (no battery) Y N Y Y Y
OPTION FEATURES AVAILABLE Description Order Code Temperature extended range (-40/+85 C) EXTR Expansion Piggy - LCD (RGB LCD Display) ELCD4, ELCD5, ELCD7, ELCD10 Expansion Piggy MIPI-DD (MIPI Camera, RGB LCD Display) MIPIDD Expansion Piggy serial 1 (CAN Low Speed ISO 11519-1) LCAN Expansion Piggy serial 2 (CAN) High Speed ISO 11898) HCAN Expansion Piggy serial 3 (RS 232) 232 Expansion Piggy serial 4 (RS 422/485) 485 Expansion CARRIER Board DCRR Expansion Piggy Nordic (ISN wireless communication module) NORD Expansion Piggy Anaren (RF communication module) ANAR LED lux guide diffusor at 90 GL90 Board Conformal Coating A33