EmCORE-i70.5 Miniboard Quick Installation Guide Version. Form Factor.5 MiniBoard CPU Soldered onboard Intel Atom N70.6GHz CPU Chipset Intel 45GSE Intel ICH7M VGA Dual Channels 8-bit LVDS/ Analog RGB/ TV-out LAN x Realtek 8C PCIe Gigabit Ethernet Audio Realtek ALC655 AC7 Audio Codec, Line-in/ Lineout/ Mic-in I/O Mini-PCI/ SATA/ USB/ COM/ LPT Technical Support If you have any technical difficulties, please consult the user s manual first at: ftp://ftp.arbor.com.tw/pub/manual Please do not hesitate to call or e-mail our customer service when you still can not find out the answer. http://www.arbor.com.tw E-mail: info@arbor.com.tw Declaration of Conformity FCC Class A This device complies with Part 5 of the FCC Rules. Operation is subject to the following two conditions : () this device may not cause harmful interference, and () this device must accept any interference received, including interference that may cause undesired operation. Copyright 0 All Rights Reserved. 40470000P - -
Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: x EmCORE-i70.5 Compact Board x Driver CD x Quick Installation Guide Ordering Information EmCORE-i70 CBK-08-70-00 Intel N70.5 Compact Board Cable Kit x USB Cable x Ethernet Cable x Audio Cable x COM Cable x IDE Cable x LPT Cable x KB/MS Y-Cable x SATA Cable - -
The Installation Paths of CD Driver Windows 000 & XP Driver Path CHIPSET \CHIPSET\INF..0.0 VGA \GRAPHICS\INTEL_K_XP_\4 LAN \ETHERNET\REALTEK\8_WINXP_5764 AUDIO \AUDIO\REALTEK_AC7\WinK_XP_A406 Windows 7 Driver Path CHIPSET \CHIPSET\INF..0.0 VGA \GRAPHICS\INTEL_WIN7_\0 LAN Windows 7 built-in LAN driver AUDIO \AUDIO\REALTEK_AC7\Win7 64_605 - -
Specifications Form Factor CPU Chipset System Memory Display Ethernet I/O Chips BIOS Audio Storage Serial Port Parallel Port KBMS Universal Serial Bus Expansion Interface.5 Compact Board Intel Atom N70 CPU.6GHz w/ 5MHz FSB Intel 45GSE + Intel ICH7M x 00-pin DDR SO-DIMM Socket supporting 5MHz SDRAM up to GB (Optional soldered onboard GB DDR SDRAM) Integrated Intel Graphics Media Accelerator 50, Dual Channels 8-bit LVDS/ Analog RGB x Realtek 8C Gigabit Ethernet ITE 878F Phonix-Award PnP Flash BIOS Realtek ALC655 AC7 Audio CODEC, MIC-in/Line-In/Line-Out x Ultra ATA, support IDE devices x Serial ATA ports with 50MB/s HDD transfer rate x CompactFlash Type II Socket (Shared with IDE) x COM ports (COM: RS-, COM: RS-/4/485 selectable) x LPT Port (SPP/EPP/ECP mode selectable) 6-pin Mini-DIN connector for PS/ standard Keyboard and Mouse via Y-cable 4 x USB.0 ports x Mini-PCI Socket Operation Temp. 0 o C ~ 60 o C ( o F ~ 40 o F) Watchdog Timer ~55 levels Reset Dimension (L x W) 46 x 0 mm (5.7 x 4.0 ) - 4 -
Board Dimensions 8.5 6.76.80 7.4 0.55 0.00.4 4.88 0.00 8.84.8 0.00.50 6.65 8.58.64 5.0.4 4.5 7.5 7.5 4.77.00.0 6.80 68.50 65.50 Unit: mm - 5 -
Jumpers/ Connectors Quick Reference Connectors Label PWR& AUDIO COM~ DIO SYSF IDE INV J8 JCOM JFRT JSMB CN RN CF SO-DIMM Function DC V Power Input Audio Connector Serial Port Connectors Digital I/O Connector Fan Connector IDE Connector LCD Inverter Connector SATA Power Connector COM RS-4/485 Selection Switches and Indicators External SMBus Connector LAN LED Indicator Reset Button Compact Flash TypeII Socket DDR SO-DIMM Socket (buttom Side) KBMS LAN, LAN LPT LVDS MINI-PCI PWR SATA~ TV USB USB VGA Keyboard & Mouse Connector Ethernet Connectors Parallel Port Connector LVDS Connector Mini-PCI Socket ATX Feature Connector Serial ATA Connectors TV-out Connector USB Type A Connectors USB Ports Pin Headers Analog RGB Connector Jumpers Label JRS JBAT JPWR JVLCD J Function COM RS-/4/485 Selection Clear CMOS Setting AT/ATX Power Mode Selection LCD Voltage Selection CF Master/ Slave Selection - 6 -
4 6 5 50 4 00 4 Jumpers & Connectors Location PWR& J8 TV INV JVLCD LVDS 4 4 4 0 COM SO-DIMM (On bottom side) VGA SYSF PWR JBAT JPWR RN COM JSMB J IDE KBMS 0 LAN SATA SATA CF (On bottom side) USB 4 0 4 6 5 0 0 0 44 4 JCOM CN DIO JRS MINI-PCI LAN USB LPT JFRT AUDIO - 7 -
Jumpers JPWR: AT/ATX Power Mode Selection Connector type:.54mm pitch x-pin headers. Pin Mode Short AT mode Open JVLCD: LCD Panel Voltage Selection The voltage of LCD panel could be selected by JVLCD in +5V or +.V. Connector type:.54mm pitch x-pin headers. Pin Voltage - +5V ATX Mode (Default) - +.V (Default) JRS: COM RS-/ 4/ 485 Selection Connector type:.00mm pitch x-pin headers. Mode RS- (Default) RS-4 RS-485 - Short Open Open -4 Open Short Open 5-6 Open Open Short 5 6 5 6 5 6 J: CF IDE Mode Selection Connector type:.00mm pitch x-pin headers. Pin Mode - Slave (Default) - Master JBAT: Clear CMOS Setting Connector type:.00mm pitch x-pin headers. Pin Mode - Keep CMOS (Default) - Clear CMOS Connectors PWR&: ATX +V Connector PRW& supplies the CPU operation ATX +V (Vcore). Pin Desc. Pin Desc. GND GND 4 4 +V +V PWR: ATX Feature Connector Connector: onboard -pin power connector Pin Desc. PS-ON GND 5S_VB J8: Small 4P Power Connector Connector type:.54mm pitch x4-pin wafer one wall 0D connector Pin Description +5V GND GND 4 +V INV: LCD Inverter Connector Connector type:.00mm pitch x5 box wafer connector. Pin Description +V GND Backlight on/off 4 Brightness control 5 GND TV: TV-out Connector Connector type:.00mm pitch x6-pin box wafer connector Composite Video CVBS GND Unused 4 GND 5 Unused 6 GND S-Video Unused GND Luminance 4 GND 5 Chrominance 6 GND 4 5-8 -
LVDS: LVDS Connector Connector type: DF--0DP-.5V connector. Pin Desc. Pin Desc. VDD VDD 4 TXCLK+ TXCLK+ 6 TXCLK- 5 TXCLK- 8 GND 7 GND 0 TXD0+ TXD0+ TXD0- TXD0-4 GND GND 6 TXD+ 5 TXD+ 8 TXD- 7 TXD- 0 GND GND TXD+ TXD+ 4 TXD- TXD- 6 GND 5 GND 8 N/C 7 N/C 0 LVDS_DATA LVDS_CLK JSMB: External SMBUS Connector Connector type:.54mm pitch x box-pin wafer connector. Pin Description SMB_Data SMB_Clock SMB_Alert# 0 IDE: Primary IDE Connector Connector type:.00mm pitch x-pin box headers. 4 44 RESET# GND DATA7 4 DATA8 5 DATA6 6 DATA 7 DATA5 8 DATA0 DATA4 0 DATA DATA DATA DATA 4 DATA 5 DATA 6 DATA4 7 DATA0 8 DATA5 GND 0 N/C DREQ GND IOW# 4 GND 5 IOR# 6 GND 7 IRDY 8 IDSEL ACK# 0 GND IRQ N/C AD 4 ATA66 DETECT 5 AD0 6 AD 7 CS0# 8 CS# (HD SELECT#) ACT# 40 GND 4 +5V 4 +5V 4 GND 44 N/C - - SATA~: Serial ATA Connectors Connector type: lockable SATA connectors with housing. Support 50MB/s HDD transfer rate. Pin Description GND TX+ TX- 4 GND 5 RX- 6 RX+ 7 GND
CF: Compact Flash Type II Socket JCOM: RS-4/485 Output Connector Connector type:.00mm pitch x4-pin box wafer connector. Pin RS-4 RS-485 TX+ DATA+ TX- DATA- RX+ N/C 4 RX- N/C 4 AUDIO: AUDIO Connector Connector type:.00mm pitch x5-pin box headers. GND 6 GND PDD 7 PDD PDD4 8 PDD 4 PDD5 PDD 5 PDD6 0 PDD4 6 PDD7 PDD5 7 PDCS# PDCS# 8 GND GND GND 4 PDIOR# 0 GND 5 PDIOW# GND 6 +5V GND 7 PIDEIRQ +5V 8 +5V 4 GND CSEL# 5 GND 40 N/C 6 GND 4 IDERST# 7 GND 4 PIORDY 8 PDA 4 PDDREQ PDA 44 PDDACK# 0 PDA0 45 HD_LED# PDD0 46 PDIAG# PDD 47 PDD8 PDD 48 PDD 4 N/C 4 PDD0 5 N/C 50 GND Pin Desc. Pin Desc. Line_In_Left Line_In_Right GND 4 GND 5 MIC 6 MIC 7 GND 8 GND Speaker Left 0 Speaker Right 0 LPT: Parallel Port Connector Connector type:.00mm pitch x0-pin headers. STB# AFD# PTD0 4 ERROR# 5 PTD 6 INIT# 7 PTD 8 SLIN# PTD 0 GND PTD4 GND PTD5 4 N/C (Key) 5 PTD6 6 BUSY 7 PTD7 8 PE ACK# 0 SELECT 0-0 -
JFRT: Switches and Indicators It provides connectors for system indicators that provides light indication of the computer activities and switches to change the computer status. Connector type:.54mm pitch x5-pin headers. RESET+ RESET- POWER_LED+ 4 POWER_LED- 5 HDD_LED+ 6 HDD_LED- 7 SPEAKER+ 8 SPEAKER- PSON+ 0 PSON- USB: USB Connector Connector type:.00mm pitch x5-pin headers. Pin Desc. Pin Desc. +5V +5V USBD- 4 USBD- 5 USBD+ 6 USBD+ 7 GND 8 GND N/C (Key) 0 N/C 0 0 CN: LAN LED Indicator Connector type:.54mm pitch x-pin headers. LED_Y- LED_Y+ LED_G- 4 LED_G+ USB: Double Stacked USB type A Connectors Connector type: double stacked USB type A connector. 4 4 USB USB LAN: GbE RJ-45 Connector LAN supports 0/00/000 Mbps Fast Ethernet Connector type: RJ-45 4 LAN: Ethernet Connector Connector type:.00mm pitch x5-pin headers TXMDI0+ TXMDI0- RXMDI+ 4 MDI+ 5 MDI- 6 RSMID- 7 MDI+ 8 MDI- N/A 0 N/C (Key) MINI-PCI: MINI-PCI Socket DIO: Digital I/O Connector DIO is a 8-bit DIO connector w/ onboard x5-pin headers, support 4-bit In/ 4-bit Out. Connector type:.00 mm pitch x5-pin headers DIO DIO DIO 4 DIO4 5 DIO5 6 DIO6 7 DIO7 8 DIO8 0 +5V 0 GND 0 KBM: Keyboard & Mouse Mini-Din Keyboard & Mouse connector Pin Description KB Data MS Data GND 4 +5V 5 KB Clock 6 MS Clock COM: RS- Connector Connector type:.00mm pitch x5-pin box headers. Pin Desc. Pin Desc. DCD# RXD TXD 4 DTR# 5 GND 6 DSR# 7 RTS# 8 CTS# RI# 0 N/C 0 - -
SYSF: Fan Connector SYSF is a -pin headers for the system fan. The fan must be a +V fan. Pin Description GND +V FAN_Detect VGA: Analog RGB Connector Connector type: VGA: D-Sub 5-pin female 5 5 Pin Desc. Pin Desc. Pin Desc. RED 6 GND N/C GREEN 7 GND VDDAT BLUE 8 GND HSYNC 4 N/C +5V 4 VSYNC 5 GND 0 GND 5 VDCLK COM: RS- Connector Connector type: D-Sub -pin male. Pin Desc. Pin Desc. DCD# 6 DSR# RXD 7 RTS# TXD 8 CTS# 4 DTR# RI# 5 GND 5 6 - -
This page is intentionally left blank. - -