M-6DX 6-Channel Digital Mixer Workshop Using the M-6DX with SONAR 007 Roland Corporation U.S. All rights reserved. No part of this publication may be reproduced in any form without the written permission of Roland Corporation U.S. SONAR is a trademark of Twelve Tone Systems, Inc. Twelve Tone Systems, Inc. is not associated or affiliated with Roland in any manner. M6DXWS08
About the Workshop Booklets The EDIROL M-6DX 6-Channel Digital Mixer delivers the power of digital mixing to musicians at an incredibly affordable price. This crystal-clear 4-bit digital mixer supports sample rates up to 96 khz, and it s extremely flexible, with a wide range of analog and digital inputs and outputs, and effects. The M-6DX s USB connectivity makes it an ideal partner for a computer-based digital audio workstation, and features such its pro EQ and the innovative Room Acoustic Control make it an excellent live mixer as well. Each M-6DX Workshop Series booklet focuses on one M-6DX topic, and is intended as a companion to the M-6DX Owner s Manual. The M-6DX Workshop booklets require M-6DX O.S. Version.00 or higher. You can download the latest O.S. for free from www.rolandus.com/edirol. About This Booklet The M-6DX makes an great companion to a digital audio workstation or DAW on a personal computer. To learn the basics of using the M-6DX with a DAW, see the Workshop booklet Using the M-6DX with a DAW. Then come back here for specific instructions on using the M-6DX with SONAR 7. You can even control SONAR directly from your M-6DX see the Using the M-6DX as a DAW Controller Workshop booklet to learn how. Understanding the Symbols in This Booklet Throughout this booklet, you ll come across information that deserves special attention that s the reason it s labeled with one of the following symbols. A note is something that adds information about the topic at hand. A tip offers suggestions for using the feature being discussed. Warnings contain important information that can help you avoid possible damage to your equipment, your data, or yourself. Configuring SONAR for Use with the M-6DX After launching SONAR, select Audio... from the Options menu to open the Audio Options window, and then click the Advanced tab. Set Driver Mode to ASIO. We ll assume you know how to operate SONAR otherwise, consult SONAR s built-in documentation in its Help menu. We ll also assume the M-6DX is connected to your PC, and that they re both powered-up. While the M-6DX can also work in WDM/KS mode, we recommend using ASIO in programs that support its use, such as SONAR.
3 Click the General tab. If you ll be recording the M-6DX s main stereo mix, make sure that the 9: EDIROL M-6DX:IN 7 driver is selected that s the main mix. 9 Click OK to exit the Audio Options window. When you close the Audio Options window, Windows asks you to relaunch SONAR for your new settings to take effect. 4 Set Playback Timing Master to : EDIROL M-6DX:OUT. 5 Set Record Timing Master to : EDIROL M-6DX:IN. 6 7 Set Sampling Rate to the M-6DX s sampling rate. Click the Drivers tab. If you selected a sampling rate other than the one the M-6DX is using in Step 6, you ll see a message saying that SONAR s sampling rate will be automatically reset to match the M-6DX when you leave the Audio Options window. To use another sampling rate, change the M-6DX s rate first as described in the Using the M-6DX with a DAW Workshop booklet. If you want to work on a project in which audio s already been recorded, set the M-6DX s sample rate to match the project s. If you changed the Audio Options window s Driver Mode setting from ASIO to WDM/KS for some reason in Step, when you restart SONAR,Windows XP Wave Profiler may ask you if it s okay to run some timing tests on your audio hardware. Click Yes. 8 The M-6DX channels are here as pairs of input drivers named for their odd-numbered channel active inputs are checkmarked. To activate a pair of inputs that are currently turned off, checkmark the pair. To turn off a pair of inputs, remove its checkmark. 3
Setting Up a Track for Recording Selecting Audio to Record To set up a track for recording Click the desired track in the Track window to display its channel strip at the lower left corner of the SONAR window as shown here. Selected track Input popup Click the Input popup menu at the top of the strip, and select what you want to record from the M-6DX. To record a mono input channel to which a mic or instrument is connected select the desired Left or Right M-6DX channel. a stereo input channel to which you ve connected a keyboard or some other stereo device select the desired stereo pair s oddnumbered Stereo channel. one side of a stereo input channel select the desired Left or Right channel. the stereo main mix bus select Stereo EDIROL M-6DX :IN 7. Only select Input Channels 3/4 or 7/8 when the M-6DX s USB button isn t lit to avoid feedback. Setting the Track s Output From the track s Output popup menu at the bottom of the strip, select Master. Click the Master track at the bottom of the Track window, and check its Output popup menu it should be set to use the M-6DX s OUT driver. If it s not, set the Master s output to EDIROL M-6DX :OUT. Turn Off Software Monitoring In this illustration, we re displaying all of the available channel strip elements. To do this, click and hold the Display popup beneath the strip and checkmark the desired channel strip elements. If the track s channel strip isn t visible, click the track in the Track window. Click the channel s Input Echo button so it s not lit. As we noted in the Using the M-6DX with a DAW Workshop booklet, you do have the option of listening through SONAR if you want to hear its effects as you record. However, since you ll encounter latency doing this, we recommend listening directly through the M-6DX. 4
Troubleshooting If you have any problems playing or recording audio in SONAR, check its built-in online Help in the Help menu. As we noted in the Using the M-6DX with a DAW booklet, you can also find Windows XP troubleshooting tips at MusicXP.net at http://musicxp.net/tuning_tips.php. You can also click the ASIO Panel... button in the Audio Options window this opens the M-6DX s control pane. Raising the Audio Buffer Size value can reduce pops and clicks, though it will also increase latency if you re working with soft synths in SONAR. Likewise, you may want to try checking the Use Smaller ASIO Buffer Size ASIO Setting checkbox. The End We hope you ve found this workshop helpful. You ll find other downloadable M-6DX Workshop booklets available for at www.rolandus.com/edirol. 5