MIMO New Series Single Band 2x2 MIMO 802.11b/g/n Versatile Indoor Access Point 650MHz CPU / at 300Mbps Model: MMN531 KEY FEATURES Qualcomm Atheros 650MHz Processor QCA9531 IEEE 802.11b/g/n compliant 26dBm aggregate power Data rates of up to 300Mbps in 802.11n 40MHz channels Enhanced sensitivity performance 2 x External 2dBi Rubber Duck s Antenna Alignment Site Survey LEDs IEEE 802.3af/at Power-over-Ethernet Support wall mounting Support AP Mass Management Software via SNMP Protocol APPLICATIONS Single Band 802.11b/g/n Access Point Mesh Networking 3G/LTE Wireless Gateway* Specifications Chipset System Memory NOR Flash Antenna Interface Reset Button LED Power Over Ethernet DC Power Power Consumption Operating System RoHS Compliance CPU: Qualcomm Atheros QCA9531 650MHz RF: Qualcomm Atheros QCA9531 () 64MB DDR2 16MB : Integrated 2dBi Rubber Duck Omni antenna 2x Fast Ethernet Port (Auto-MDI/MDI-X) 1x JTAG 14 Pin Connector 1 1x Serial Port 4 Pin Connector 1 Yes Indicators: Power LED, LAN Activity, 4x Signal Indicator 1x IEEE 802.3af/at on LAN or Passive PoE 1x DC Jack Connector: 12-56V (depending on Item Code) 6.9 Watt (Max) CompexWRT or OpenWRT Environmental Temperature: Operating: -20ºC to 70ºC, Storage: -40ºC to 90ºC Humidity (non-condensing): Operating: 5% to 95%, Storage: Max. 90% Dimensions 161.5 x 161.5 x 80 mm Extras 1. These features can only be accessed on the Embedded Board *Optional Configurations available Configurations are subject to change without notifications Yes Surge Arrestor, Watchdog Timer Last Updated: 04/03/16
RF Performance Table Data Rate TX Power (per chain) TX Power (2 chains) Tolerance Data Rate RX Specifications Sensitivity Tolerance 1Mbps 26dBm ±2dB 1Mbps -94dBm ±2dB 802.11b 2Mbps 26dBm ±2dB 5.5Mbps 26dBm ±2dB 802.11b 2Mbps -92dBm ±2dB 5.5Mbps -90dBm ±2dB 11Mbps 26dBm ±2dB 11Mbps -89dBm ±2dB 6Mbps 26dBm ±2dB 6Mbps -95dBm ±2dB 9Mbps 26dBm ±2dB 9Mbps -94dBm ±2dB 12Mbps 26dBm ±2dB 12Mbps -94dBm ±2dB 802.11g 18Mbps 26dBm ±2dB 24Mbps 26dBm ±2dB 802.11g 18Mbps -93dBm ±2dB 24Mbps -90dBm ±2dB 36Mbps 21dBm 24dBm ±2dB 36Mbps -85dBm ±2dB 48Mbps 20dBm ±2dB 48Mbps -79dBm ±2dB 54Mbps 19dBm 22dBm ±2dB 54Mbps -75dBm ±2dB MCS 0 22dBm 25dBm ±2dB MCS 0-94dBm ±2dB MCS 1 21dBm 24dBm ±2dB MCS 1-93dBm ±2dB MCS 2 21dBm 24dBm ±2dB MCS 2-90dBm ±2dB 11n HT20 MCS 3 21dBm 24dBm ±2dB MCS 4 20dBm ±2dB 11n HT20 MCS 3-87dBm ±2dB MCS 4-84dBm ±2dB MCS 5 19dBm 22dBm ±2dB MCS 5-79dBm ±2dB MCS 6 18dBm 21dBm ±2dB MCS 6-79dBm ±2dB MCS 7 17dBm 20dBm ±2dB MCS 7-75dBm ±2dB MCS 0 22dBm 25dBm ±2dB MCS 0-88dBm ±2dB MCS 1 21dBm 24dBm ±2dB MCS 1-87dBm ±2dB MCS 2 21dBm 24dBm ±2dB MCS 2-85dBm ±2dB 11n HT40 MCS 3 21dBm 24dBm ±2dB MCS 4 20dBm ±2dB 11n HT40 MCS 3-83dBm ±2dB MCS 4-80dBm ±2dB MCS 5 19dBm 22dBm ±2dB MCS 5-76dBm ±2dB MCS 6 18dBm 21dBm ±2dB MCS 6-73dBm ±2dB MCS 7 17dBm 20dBm ±2dB MCS 7-70dBm ±2dB 2
RF Performance Information Scan Surface Direct Far Field No. of Theta 361 No. of Phi: 2 Frequency Polarization 2.400-5.500 GHz Linear Theta (2-way) 360 degree AUT Probe Separation 70.87 PSI (1/2 way) 180 degree Reference Power -51.56 db Far Field Patterns Frequency: 2.4000 3
Dimensional Drawing CompexWRT Features It is developed based on the OpenWRT platform and features the latest Qualcomm Atheros drivers with LuCI web interface. It combines all of the best in one system. It offers many levels of customization. Powerful Wireless Features Qualcomm Atheros Drivers Native 802.11ac Support Wireless Distribution System (WDS) AP and Client Mode Seamless Mesh Networking Enhanced Control User-friendly LuCI Graphical User Interface Hotspot and Guest Portal Support Powerful Network Diagnostic Utilities Real-time Network Load Graphs Find out more at http://wiki.compex.com.sg/ 4
Firmware / Software indoor access point The MMN531 is shipped with the versatile CompexWRT. OpenWRT SDK is provided for further development. Supported Operating System CompexWRT Operating System OpenWRT Operating System 1 Supported Mass Management Software Compex AP Controller Software 2 1. OpenWRT SDK is available without any technical support by Compex unless otherwise stated. 2. AP Controller only compatible with MMN531 running CompexWRT. *Configurations are subject to change without notifications. Customization Options The MMN531 can be customized for volume applications. Please contact our sales representatives for more information. Increase System Memory up to 128 MB Increase NOR Flash up to 32 MB Adding of Peripherals Removing of Peripherals Industrial Grade Chipset WiFi Module Customization For more customization, contact us at sales@compex.com.sg Ordering Options Item Code SIM Holder Antenna Power Solutions Radio Output (Per chain) Power Supply MMN531HV-A 7A04GFOUAR O 2dBi @ Rubber Duck DC: 24-56V & US MMN531HV-A 7A04GFOEAR O 2dBi @ Rubber Duck DC: 24-56V & EU MMN531LV-A 7A04GFOUARSIM P 2dBi @ Rubber Duck DC: 12-24V & US MMN531LV-A 7A04GFOEARSIM P 2dBi @ Rubber Duck DC: 12-24V & EU Packaging Content Item Quantity Remark MMN531 Indoor Access Point 1 Read Me First Documentation 1 24V DC Jack Power Adapter 1 Packaging Information Packaging Type Dimensions Nett Weight Gross Weight Carton Box (8 units) 422 x 410 x 240 mm 3.52 kg 4.28 kg 5