SD 4 channel analog audio and digital audio embedder A Synapse product COPYRIGHT 2010 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.
Block schematic & I/O panel SDI IN+ EQ EMB A EMB B EDH PROCESSING SDI OUT + SDI OUT + GAIN PHASE AES/EBU IN 1 AES/EBU IN 2 SRC SRC GAIN PHASE ANALOG AUDIO 1 ANALOG AUDIO 2 ANALOG AUDIO 3 ANALOG AUDIO 4 µp AUDIO INPUTS FROM SYNAPSE BUS 1 2 3 4 INTERNAL SYNAPSE BUS RACK CONTROLLER BPL02 BPL02D BPL03 BPL03D SDI INPUT (OPTIONAL FIBER INPUT) SDI + EMBEDDED OUTPUT 1 SDI+EMB OUT 2 (OPTIONAL FIBER OR CVBS OUT) AES/EBU INPUT 1 (with BPL03D on sub-d) AES/EBU INPUT 2 (with BPL03D on sub-d) ANALOG AUDIO INPUT 1 ANALOG AUDIO INPUT 2 ANALOG AUDIO INPUT 3 ANALOG AUDIO INPUT 4 For fibre connectivity see www.axon.tv
Features The is an analog and digital audio embedder with 4 local analog audio and 2 local digital audio inputs. The card has the possibility to add 4 extra channels through the Synapse ADD-ON buss. A reference level audio adjustment for the analog audio inputs and an SRC for the digital audio inputs are provided. For Dolby-E and other transparent applications the SRC can be bypassed. 2 group embedder (1 local 1 ADD-ON) Sample Rate Converter on AES/EBU input Adjustable audio gain (in 0.25dB) and phase (0-180 deg) Selectable +12, +15, +18 and +24 dbu for 0dBFS for the analog audio inputs. 4 extra audio channels (1 groups) with optional ADC20, ADC24, ADL24, DBE08 and DIO24 Analog audio inputs on 3 pole screw terminals or sub-d EDH detection and generation Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP) Optional 1 fiber input (replacing 1 SDI input) or 1 fiber output (replacing 1 SDI output) on I/O panel Optional 1 CVBS output (replacing 1 SDI output) on I/O panel Complementary cards: ADC20, ADC24, ADL24, DIO24, DIO48, DLA44, DLA43 Applications Generic analog and/or digital audio embedding
Ordering information Module: : SD 4 channel analog Audio and digital Audio embedder I/O: BPL02_: I/O panel for with unbalanced AES/EBU in and balanced analog audio in BPL02D_: I/O panel for with unbalanced AES/EBU in and balanced analog audio in on sub-d BPL03_: I/O panel for with balanced AES/EBU in and balanced analog audio in BPL03D_: I/O panel for with balanced AES/EBU in and balanced analog audio in on sub-d Fiber outputs: BPL02T_FC/PC_: I/O panel for with fiber transmitter on FC/PC BPL02T_SC_: I/O panel for with fiber transmitter on SC BPL02DT_FC/PC_: I/O panel for with fiber transmitter on FC/PC BPL02DT_SC_: I/O panel for with fiber transmitter on SC BPL03T_FC/PC_: I/O panel for with fiber transmitter on FC/PC BPL03T_SC_: I/O panel for with fiber transmitter on SC BPL03DT_FC/PC_: I/O panel for with fiber transmitter on FC/PC BPL03DT_SC_: I/O panel for with fiber transmitter on SC Fiber inputs: BPL02R_FC/PC_: I/O panel for with fiber receiver on FC/PC BPL02R_SC_: I/O panel for with fiber receiver on SC BPL02DR_FC/PC_: I/O panel for with fiber receiver on FC/PC BPL02DR_SC_: I/O panel for with fiber receiver on SC BPL03R_FC/PC_: I/O panel for with fiber receiver on FC/PC BPL03R_SC_: I/O panel for with fiber receiver on SC BPL03DR_FC/PC_: I/O panel for with fiber receiver on FC/PC BPL03DR_SC_: I/O panel for with fiber receiver on SC CVBS outputs: BPL02C_: I/O panel for with CVBS output BPL02DC_: I/O panel for with CVBS output BPL03C_: I/O panel for with CVBS output BPL03DC_: I/O panel for with CVBS output
Specifications Serial Video Input 625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio Number of Inputs 1 Equalization Automatic to 300m @ 270Mb/s with Belden 1694A or equivalent cable Return Loss > 15dB up to 270MHz SD Serial Video Output 625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio Number of Outputs 2 Signal Level 800mV nominal DC Offset 0V ±0.5V Rise/Fall Time 800ps nominal Overshoot < 10% of amplitude Return Loss > 15dB up to 270MHz Analog Audio Input Type Balanced analog audio Number of Inputs 4 Connector Removable terminal strip or 25 pins female sub-d Impedance 10k Ohms nominal (differential) Sampling Rate 48KHz Signal Level 0dBFS => 12dBu, 15dBu, 18dBu or 24dBu Level Control Range +12dB to -60dB 0.25dB increments Frequency Response < ±0.1dB, 20Hz to 20kHz (broadcast quality) Dynamic Range 100dB @-60 dbfs THD+N < 0.002% (>96dB) @ 1kHz, -1dB FS < 0.004% (> 96dB) @ 20Hz to 20kHz, -1dB FS CMRR > 60dB at 1kHz AES Input Connector BNC, Screw terminal or 25 pins female sub-d (balanced) AES-1992 for balanced synchronous or asynchronous PCM/AES, SMPTE 276M for single ended synchronous or asynchronous PCM/AES Number of Inputs 2 Sampling Rate 32 khz to 96 khz asynchronous 48 khz Synchronous (SRC=off) Resolution 20 bits Minimum Input/Output Delay 2 ms Number of Inputs 2 Impedance 110 Ohms or 75 Ohms Level 0.2V to 1V nom for BNC, 2V to 7V for balanced operation Miscellaneous Weight Aprox. 250g Operating Temperature 0 C to +50 C Dimensions 137 x 296 x 20 mm (HxWxD) Electrical Voltage +24V to +30V Power <7 Watts