Arc spraying Parts List PL 9697 EN 02 Oerlikon Metco 6/2015
Oerlikon Metco AG Switzerland Rigackerstrasse 16 CH-5610 Wohlen +1 56 618 81 81 +1 56 618 81 00 www.oerlikon.com/metco i Warranty Disclaimer Installing non-oerlikon Metco spare parts on Oerlikon Metco equipment voids the product warranty.
1 Parts list 1.1 Assembly overview (without nozzle system) PL 9697 EN 02
1.2 Closed nozzle system 6 5 7 2 1 1.2 1.1 PL 9697 EN 02
Pos. Designation Article No. 1 Radial Nozzle Nut 10578 1.1 Fan Spray Nozzle Nut 10568 1.2 Fan Spray Nozzle 10568 2 Gas Nozzle Ø 1.6-2.0 mm 1056259 Gas Nozzle Ø 2.5 mm 1056257 Cover Ring 10576 Contact Nozzle Ø 1.6 mm 1056118 Contact Nozzle Ø 1.6 mm (for Al) 1056129 Contact Nozzle Ø 2.0 mm 1056120 Contact Nozzle Ø 2.0 mm (for Al) 105610 Slot Contact Nozzle Ø 2.0 mm 1056251 Contact Nozzle Ø 2.5 mm 1056122 Contact Nozzle Ø 2.5 mm (for Al) 105611 Slot Contact Nozzle Ø 2.5 mm 1056252 5 Atomizer Nozzle (2-hole) 10561 6 Air Nozzle Tube 1056108 7 Nozzle Adjusting Device 105252 PL 9697 EN 02 5
1. Open nozzle system 6 5 2 1 7 Pos. Designation Article No. 1 Arc Shield 10529 2 Cover Ring 10528 Contact Nozzle Ø 1.6 mm 1056118 Contact Nozzle Ø 1.6 mm (for Al) 1056129 Contact Nozzle Ø 2.0 mm 1056120 Contact Nozzle Ø 2.0 mm (for Al) 105610 Contact Nozzle Ø 2.5 mm 1056122 Contact Nozzle Ø 2.5 mm (for Al) 105611 Atomizer Nozzle (2-Hole) Size 1 Ø 1.6-2.0 mm 10561 Atomizer Nozzle (2-Hole) Size 2 Ø 2.5 mm 105616 5 O-Ring NBR 10x1.5 mm 1066172 6 Air Nozzle Tube 105696 7 Nozzle Adjusting Device 105252 6 PL 9697 EN 02
1. Spray head 1 2 (2) () 5 Pos. Designation Article No. 1 Spray Head LD/U2 (incl. Pos. 2, ) 105277 2 O-Ring NBR 9x1.5 mm 1066169 O-Ring NBR 22x2 mm 1066181 Knurled Screw M6x0 105980 5 Washer for Air Nozzle Tube 105250 PL 9697 EN 02 7
1.5 Gear housing 6 5 28 29 27 1 0 26 1 2 2 25 (19) (20) 7 6 5 2 (19) (22) 2 (19) 22 21 8 20 9 19 18 10 12 1 17 11 1 16 15 Pos. Designation Article No. 1 Fillister Head Screw Mx16 DIN8 Zn 10752 2 Washer M DIN125 Zn 106607 Covering Plate 105251 Knurled Screw M6x0 120 1056112 5 Washer 10525 6 Pressure Spring 2x10.2x22.5x.5 1066188 7 Adjusting Nut 10526 8 Gear Housing 1052770 8 PL 9697 EN 02
Pos. Designation Article No. 9 Base Plate 105229 10 Dome 1056167 11 Fillister Head Screw M5x25 DIN8 Zn 106602 12 O-Ring NBR 10x1 mm 1066171 1 O-Ring NBR 10x1.5 mm 1066172 1 By-Pass (long) (incl. Pos. 12, 1) 1052772 15 Current-Air-Adapter (right) 1056598 16 Current-Air-Adapter (left) 1056599 17 By-Pass (short) (incl. Pos. 18) 1052771 18 O-Ring NBR 8.5x1.5 mm 1066157 19 Fillister Head Screw M5x16 DIN8 Zn 106600 20 Washer M5 105270 21 Extension Insert Compressed Air 105278 22 Fillister Head Screw M5x20 DIN8 Zn 106601 2 Contact Plate (lower) 105279 2 Contact Plate (upper) 105228 25 Pressure Plate (incl. Pos. 28, 29) 105277 26 Pressure Lever 105628 27 Adjusting Shaft 1052 28 Circlip A7x0.8 DIN 71 106615 29 Deep Groove Ball Bearing 627-2RS 10551 0 Distance Sleeve 1052 1 Washer M8 DIN125 Zn 1066051 Drive Roll Ø 1.6 mm Knurled Profile 105612 Drive Roll Ø 1.6 mm Spline Profile 105605 Drive Roll Ø 1.6 mm Spline Profile (polished) 105618 Drive Roll Ø 2.0 mm Knurled Profile 10561 2 Drive Roll Ø 2.0 mm Spline Profile 105607 Drive Roll Ø 2.0 mm Spline Profile (polished) 105619 Drive Roll Ø 2.5 mm Knurled Profile 10561 Drive Roll Ø 2.5 mm Spline Profile 105609 Drive Roll Ø 2.5 mm Spline Profile (polished) 105620 Bearing Housing 10527 Raised Countersunk Head Screw Mx8 DIN96 Ni 106611 5 Seal Ring 105275 6 Needle Bearing BK1210 1052851 PL 9697 EN 02 9
1.6 E-Motor with drive shaft 1 2 9 5 6 10 7 8 -M2 11 10 PL 9697 EN 02
Pos. Designation Article No. Drive complete with AC-Motor 10566 1 Drive Shaft 10560 2 H-Sleeve 1052 Coupling 1056165 Setscrew Mx5 DIN91 5H 1069287 5 Hexagon Socket Screw M5x0 (torque:.8-5.2 Nm) 107222 6 Cu-Seal Ring 5x7.5x1 DIN760A 106700 7 O-Ring NBR 5.x2. mm 10586 8 Cable Plug 6-pol. PG1.5 105505 9 Hexagon Socket Screw M5x0 107222 10 Grip Head 1056166 11 Protective Cover for Motor Shaft 10567 -M2 Three Phase Current Motor with Gear 105529 PL 9697 EN 02 11
1.7 Hose package 1 2 (2x) (2x) 5 12 PL 9697 EN 02
Pos. Designation Article No. Hose Package compl. 5.5 m (incl. Pos. 1-5) 1 Bellows Current-Air Connection 105292 2 Current air/hose 5.5 m 10751 Control Cable 5.5 m Insulated Wire Guide Hose 5.5 m 10751 5 External Hose 5x1.5 mm (material sold by the meter) 105518 PL 9697 EN 02 1
1.8 List of recommended spare parts for stock keeping Designation Article No. Illustration Pos. LD/U2E Gas Nozzle Ø 1.6-2.0 mm 1056259 Gas Nozzle Ø 2.5 mm 1056257 page 2 Contact Nozzle Ø 1.6 mm 1056118 Contact Nozzle Ø 1.6 mm (for Al) 1056129 Contact Nozzle Ø 2.0 mm 1056120 Contact Nozzle Ø 2.0 mm (for Al) 105610 Slot Contact Nozzle Ø 2.0 mm 1056251 page Contact Nozzle Ø 2.5 mm 1056122 Contact Nozzle Ø 2.5 mm (for Al) 105611 Slot Contact Nozzle Ø 2.5 mm 1056252 Drive Roll Ø 1.6 mm Knurled Profile 105612 Drive Roll Ø 1.6 mm Spline Profile 105605 Drive Roll Ø 1.6 mm Spline Profile (polished) 105618 Drive Roll Ø 2.0 mm Knurled Profile 10561 Drive Roll Ø 2.0 mm Spline Profile 105607 page 8 2 Drive Roll Ø 2.0 mm Spline Profile (polished) 105619 Drive Roll Ø 2.5 mm Knurled Profile 10561 Drive Roll Ø 2.5 mm Spline Profile 105609 Drive Roll Ø 2.5 mm Spline Profile (polished) 105620 Hose Package Insulated Wire Guide Hose 5.5 m 10751 page 12 Operating Resources PTFE-Spray 105182 Contact Grease 10518 Graphite Powder 10518 -- -- Nozzle Cleaner 105185 1 PL 9697 EN 02