Serena Meridian Premier Director Sorrento Designer Entertainer SEATING CONCEPTS, LLC Product Specification 250 Series Multipurpose Platform - Type A Revision: 2016-A Revision date: April 2016 Document: 2821 102 02016 CP-MP250-01 250 Series Type A features are: Type A Style Varying back styles Fixed (no motion) Self-lifting seat return mechanism Dual pedestal design s options: o Fixed o center armrest (optional) o Armless (with or without insert cushion - optional) 250 series components: Steel parts are die stamped or rolled, joined by MIG welding and steel hardware. All metal parts are finished with epoxy powder coating which offers optimum protection. Wood parts are available in a variety of standard stains and lacquers, giving them a distinctive touch (custom stains available at an additional cost). Injected molded parts, such as outer backs and cup holders, are made of high impact polypropylene. Polyurethane foams are manufactured to consistent physical properties which provide maximum comfort and comply with California Flammability TB 117. Chairs are upholstered with quality fabrics which comply with California Flammability TB 117. Lifetime warranty on gravity seat return mechanism. Five year warranty in material and workmanship. Fabric warranty per mill s guarantee.
Designer Director Meridian Entertainer Sorrento Serena Premier Slim
L.F.F. MODELS: Designer / Entertainer / Director / Sorrento / Serena / Meridian / Premier * Pitch 41 43 30 25 20 30 25 20 A 811 [31 7/8] 770 [30 1/4] 731 [28 3/4] 819 [32 1/4] 774 [30 1/2] 731 [28 3/4] Riser Height Size Line B 744 [29 3/8] 707 [27 7/8] 666 [26 1/4] 751 [29 1/2] 709 [28] 667 [26 1/4] I. 127-203 [5-8] 337 [13 1/4] C 651 [25 5/8] 610 [24] 571 [22 1/2] 659 [26] 614 [24 1/4] 571 [22 1/2] II. 229-254 [9-10] 343 [13 1/2] D 1015 [40] 1037 [41] 1060 [41 3/4] 1065 [41 7/8] 1087 [43] 1106 [43 1/2] III. 279-305 [11-12] 343 [13 1/2] E 470 [18 1/2] 470 [18 1/2] 470 [18 1/2] 470 [18 1/2] 470 [18 1/2] 470 [18 1/2] IV. 330-356 [13-14] 343 [13 1/2] F 911 [35 7/8] 873 [34 3/8] 835 [32 7/8] 911 [35 7/8] 873 [34 3/8] 835 [32 7/8] V. 381-406 [15-16] 368 [14 1/2] F 727 [28 5/8] 689 [27 1/8] 651 [25 5/8] 733 [28 7/8] 695 [27 3/8] 657 [28 7/5] VI. 432-457 [17-18] 394 [15 1/2] G * 652 [25 5/8] 612 [24 1/8] 571 [22 1/2] 658 [25 7/8] 618 [24 3/8] 577 [22 3/4] VII. 483-508 [19-20] 419 [16 1/2] H 607 [23 7/8] 607 [23 7/8] 607 [23 7/8] 607 [23 7/8] 607 [23 7/8] 607 [23 7/8] Wall I + 1 H 618 [24 3/8] 618 [24 3/8] 618 [24 3/8] 618 [24 3/8] 618 [24 3/8] 618 [24 3/8] Distance taken from the front hole of the shoe to I 573 [22 1/2] 533 [21] 493 [19 3/8] 581 [22 7/8] 537 [21 1/8] 494 [19 1/2] the riser. * Director back only available in 41 height. * All measurements presented have a tolerance of +/- 6.35 mm (1/4 in). * Measurements were taken under the following conditions: standard seat on 90% return, rectangular armrest or plastic IISA cup holder and Oversize tablet arm. ** When using 100% seat return, use dimension B for plastic IISA cup holder or C for wood armrest. 483 [19] 508 [20] (J) Chair Width 533 [21] 559 [22] 584 [23] 610 [24] Minimum Radius Row Spacing Riser (min. 8 [in] max. 18 [in]) Option Cantilever Slopes Y* Y Y Y Y N 6.0 [236] G + 12 A A w/ Tablet Arm N A* A A A N 6.0 [236] F + 12 A A N N A A A A 6.0 [236] G + 12 A N Armless N N A A A A 6.0 [236] G + 12 A N 0, 2, 4, 6, R2, R4, R6 R = Reverse. * Oval end panel (metal encased) requires an additional 12.7 mm (1/2 in) clearance at each end. * When using insert cushion in armless option, a reduced seat size will apply. * Slopes 6 and R6 available on fixed chairs and/or with 45% seat return. * Cantiliver stanchions can be installed on slopes 0 and 2 with oval end panel and on fixed chairs only. * For width 19, w/table arm 20 and love seat 20, the maximum manufacturing is 3% of whole project.
PLANETARIUM MODELS: Designer / Director / Entertainer / Sorrento / Serena / Meridian / Premier Pitch Size Line Riser Height 30º 25º 20º A 823 [32 3/8] 784 [30 7/8] 744 [29 1/4] 30º 25º 20º B 756 [29 3/4] 719 [28 3/8] 680 [26 3/4] I. 127-203 [5-8] 356 [14] 356 [14] 356 [14] C 614 [24 1/8] 575 [22 5/8] 535 [21 1/8] II. 229-254 [9-10] 356 [14] 356 [14] 356 [14] D 1015 [40] 1042 [41] 1055 [41 1/2] III. 279-305 [11-12] 356 [14] 356 [14] 356 [14] E 470 [18 1/2] 470 [18 1/2] 470 [18 1/2] IV. 330-356 [13-14] 381 [15] 369 [14 ½ ] 369 [14 1/2] F 607 [23 7/8] 607 [23 7/8] 607 [23 7/8] V. 381-406 [15-16] 381 [15] 369 [14 ½ ] 369 [14 1/2] G** 683 [26 7/8] 644 [25 3/8] 604 [23 3/4] VI. 432-457 [17-18] 419 [16 1/2] 407 [16] 407 [16] H 38 [1 1/2] 38 [1 1/2] 38 [1 1/2] VII. 483-508 [19-20] 457 [18 ] 432 [17 ] 432 [17 ] I 583 [23] 546 [21 1/2] 507 [20] Wall I+1 I+1 I+1 HR 1144 [45] 1104 [43 1/2] 1065 [41 7/8] 45º 40º 35º 45º 40º 35º I. 127-203 [5-8] 368 [14 1/2] 368 [14 1/2] 368 [14 1/2] A 931 [36 5/8] 897 [35 1/4] 861 [33 7/8] II. 229-254 [9-10] 368 [14 1/2] 368 [14 1/2] 368 [14 1/2] B 864 [34] 828 [32 5/8] 793 [31 1/4] III. 279-305 [11-12] 368 [14 1/2] 368 [14 1/2] 368 [14 1/2] C 721 [28 3/8] 687 [27 1/8] 651 [25 5/8] IV. 330-356 [13-14] 432 [17] 432 [17] 394 [15 1/2] D 940 [37 1/8] 980 [38 1/8] 997 [39 1/4] V. 381-406 [15-16] 445 [17 1/2] 432 [17 ] 394 [15 1/2] E 470 [18 1/2] 470 [18 1/2] 470 [18 1/2] VI. 432-457 [17-18] 495 [19 1/2] 457 [18 ] 445 [17 1/2] F 607 [23 7/8] 607 [23 7/8] 607 [23 7/8] VII. 483-508 [19-20] 546 [21 1/2] 508 [20] 483 [19] G** 791 [31 1/8] 757 [29 3/4] 721 [28 3/8] Wall I+1 I+1 I+1 H 38 [1 1/2] 38 [1 1/2] 38 [1 1/2] I 692 [27 1/4] 655 [25 3/4] 620 [24 3/4] Distance taken from the front hole of the shoe to the riser. HR 1252 [49 1/4] 1217 [47 7/8] 1181 [46 1/2] * All measurements presented have a tolerance of +/- 6.35 mm (1/4 in). * Measurements were taken under the following conditions: standard seat on 90% return, rectangular armrest or plastic IISA cup holder. 483 [19] 508 [20] (J) Chair Width 533 [21] 559 [22] 584 [23] 610 [24] Minimum Radius Row Spacing Riser (min. 8 [in] max. 18 [in]) Option Cantilever Slope Planetarium N A A A A N 6.0 [236] G + 12 A N 0 * Available for Epic, Entertainer, Meridian and Premier backs. * Only available with oval end panel (metal encased) and it requires an additional 12.7 mm (1/2 in) clearance at each end. * Only available for stationary type of chair.
MODEL: Slim Pitch 34 36 38 30 25 20 30 25 20 30 25 20 A 781 [30 3/4] 750 [29 1/2] 724 [28 1/2] 793 [31 1/4] 759 [29 7/8] 730 [28 3/4] 805 [31 3/4] 768 [30 1/4] 736 [29] B 702 [27 5/8] 675 [26 1/2] 648 [25 1/2] 711 [28] 684 [27] 656 [25 3/4] 721 [28 3/8] 694 [27 3/8] 666 [26 1/4] C 559 [22] 529 [20 7/8] 502 [19 3/4] 571 [22 1/2] 537 [20 1/8] 509 [20] 568 [22 3/4] 546 [21 1/2] 515 [20 1/4] D 857 [33 3/4] 864 [34] 892 [35 1/8] 905 [35 5/8] 915 [36] 942 [37 1/8] 954 [37 1/2] 966 [38] 991 [39] E 451 [17 3/4] 451 [17 3/4] 451 [17 3/4] 451 [17 3/4] 451 [17 3/4] 451 [17 3/4] 451 [17 3/4] 451 [17 3/4] 451 [17 3/4] F 896 [35 1/4] 869 [34 1/4] 841 [33 1/8] 897 [35 1/4] 878 [34 5/8] 850 [33 1/2] 914 [36] 887 [34 7/8] 859 [23 1/4] F* 693 [27 1/4] 666 [26 1/4] 638 [25 1/8] 702 [27 5/8] 675 [26 5/8] 647 [25 1/2] 711 [28] 684 [27] 656 [25 7/8] G** 535 [21] 505 [19 7/8] 478 [18 7/8] 547 [21 1/2] 513 [20 1/4] 485 [19 1/8] 559 [22] 522 [20 1/2] 491 [19 3/8] H 604 [23 3/4] 604 [23 3/4] 604 [23 3/4] 604 [23 3/4] 604 [23 3/4] 604 [23 3/4] 604 [23 3/4] 604 [23 3/4] 604 [23 3/4] H* 618 [23 3/8] 618 [23 3/8] 618 [23 3/8] 618 [23 3/8] 618 [23 3/8] 618 [23 3/8] 618 [23 3/8] 618 [23 3/8] 618 [23 3/8] I 531 [20 7/8] 501 [19 3/4] 475 [18 3/4] 543 [21 3/8] 510 [20] 481 [18 7/8] 556 [21 7/8] 519 [20 1/2] 487 [19 1/8] * All measurements presented have a tolerance of +/- 6.35 mm (1/4 [in] ). * Measurements were taken under the following conditions: Slim seat on 100% return, Slim armrest and Premier backrest. Riser Height Size Line I. 127-203 [5-8] 337 [13 1/4] II. 229-254 [9-10] 343 [13 1/2] III. 279-305 [11-12] 343 [13 1/2] IV. 330-356 [13-14] 343 [13 1/2] V. 381-406 [15-16] 368 [14 1/2] VI. 432-457 [17-18] 394 [15 1/2] VII. 483-508 [19-20] 419 [16 1/2] Wall I + 1 Distance taken from the front hole of the shoe to the riser. 483 [19] 508 [20] (J) Chair Width 533 [21] 559 [22] 584 [23] 610 [24] Minimum Radius Row Spacing Riser (min. 8 [in] max. 18 [in]) Option Cantilever Slopes Y Y Y Y Y N 6.0 [236] G + 12 A A w/ Tablet Arm N A A A A N 6.0 [236] F + 12 A A N N A A A A 6.0 [236] G + 12 A N Armless N N A A A A 6.0 [236] G + 12 A N 0, 2, 4, 6, R2, R4, R6 R = Reverse. * Oval end panel (metal encased) requires an additional 12.7 mm (1/2 in) clearance at each end. * When using insert cushion in armless option, a reduced seat size will apply. * Slopes 6 and R6 available on fixed chairs and/or with 45% seat return. * Cantiliver stanchions can be installed on slopes 0 and 2 with oval end panel and on fixed chairs only. * For width 19, w/table arm 20 and love seat 20, the maximum manufacturing is 3% of whole project.
45% 90% 100% Normal Acoustic Normal Acoustic Standard Waterfall Flared Slim w/tablet Arm Molded 55 [Kg/m 3 ] Open Cell 24 N Plastic Wood Plastic Metal Model Foam Outer Base Wood 1, 2 Wood finish outer backs require wood inner base. The Slim model is available with back fully upholstered.. Designer Y Y Y Y N Y A A Y N Director Y Y Y Y N Y A A Y N Meridian Y Y Y Y N Y A A Y N Entertainer Y Y Y Y N Y A A Y N Sorrento Y Y Y Y N Y A A Y N Serena Y Y Y Y N Y N N N Y Premier Y Y Y N Y N Y Y N N Slim Y Y Y N Y N Y Y N N Model Return Pan Cover Foam Plastic Wood Molded Foam 60 [Kg/m³] Designer Y Y Y Y A Y A Y Y Y N Director Y Y Y Y A Y A Y Y Y N Meridian Y Y Y Y A Y A Y Y Y N Entertainer Y Y Y Y A Y A Y Y Y N Sorrento Y Y Y Y A Y A Y Y Y N s will be reduced by one size when using tablet arms and/or retractable armrests. Counterbalance tip up mechanisms is made of steel strip of 3/8 x 1 ½. Optional seat return activated by high resistance elastomer (torcelastik) only for plastic seat pan. cover with cinch tie for easy maintenance. For retractable armrest, 100% seat return is not available. Flared foam is not available for Planetarium chairs. The Slim model is available with seat fully upholstered. Serena Y Y Y Y A Y A Y Y Y N Premier Y Y Y Y A Y A Y Y Y N Slim N Y Y N N Y A Y Y Y Y
501 502 503 504 505 554 560 509 570-572 517-520 550 553 555-558 573-576 Oval Rectangular Full Length Rectangular ¾ Length Trapezoid Full Length Trapezoid ¾ Length Oval Rounded Edge ¾ ADA (retractable armrest) Palace (die cast) Swing Away Solid Wood End Panels MDF End Panels Cast Iron End Panels Configuration Model Fixed Armless Designer Y Y Y Director Y Y Y Meridian Y Y Y Entertainer Y Y Y Sorrento Y Y Y Serena Y Y Y wood armrests and plastic cup holders, available from 21 to 23 widths. armrest available with or without seat inserts. Armless option available from 21 to 23 width chair. Width of 20 is available only with reduced seat size. Planetarium chair only available with fixed armrest. Premier Y Y Y Slim Y Y Y Panels Model Designer Y Y Y Y Y Y Y A A A Y Y A Director Y Y Y Y Y Y Y A A A Y Y A Meridian Y Y Y Y Y Y Y A A A Y Y A Entertainer Y Y Y Y Y Y Y A A A Y Y A Sorrento Y Y Y Y Y Y Y A A A Y Y A Serena Y Y Y Y Y Y Y A A A Y Y A Premier Y Y Y Y Y Y Y A A A Y Y A Slim Y Y Y Y Y Y Y A A A Y Y A Slim End Panels 2, 4 Interior debris shield on oval style (metal encased) end panel only. Full length end panels only available in slopes 0, 2 and 4. Oval (554), rectangular to ¾ (550), rectangular to the floor (551) and trapezoidal to ¾ (552) and trapezoidal to the floor (553) end panels also available in ¾ MDF thickness with laminate (not metal encased). ¾ MDF end panels available with rounded edge (black only), all other colors with square edge. For Planetarium chairs, only oval end panel (metal encased) available (501). It is not permitted: Cup holder for ADA end panel for chair widths under 21. Cast end panels: Palace (509) and end panels (573, 574, 575, 576) with tablet arm or cup holder. Use of MDF end panels for Swing away type. Solid wood, oval round edge (554), rectangular to ¾ (550), rectangular to the floor (551), trapezoidal to ¾ (552) and trapezoidal to the floor (553) as a swing away type. In die cast panels, swing away only apply to palace panel.
Component Standard Tablet (84.5 in 2 ) Oversize Tablet (109 in 2 ) Graduate Tablet (151 in 2 ) Number and Letter Plates Book Racks Envelope Holder Lights On Lights On End Panel Movable Base Electric Data Port Embroidery 201 202 203 204 206 207 210 201 216 216 217 217 224 Component Radius (polyurethane) Curve (polyurethane) Fully Upholstered 15 IISA Cup Holder 18 IISA Cup Holder 15 SC Cup Holder 18 SC Cup Holder s and Cup Holders Chair type Rectangular 2, 4 Radius (wood) 4 Curve (wood) 4 Dome 4 Scroll 4 Slim 2, 4 Y Y Y A A A A A A N A N A Curve polyurethane armrest will be shortened when using tablet arms. It is not permitted: Curved polyurethane armrest in: o armrest (love seat). ooval aisle panel in 19 in width. oconcave full length end panel 522. w/ Tablet Arm Y Y Y A A A A A N A N A A Y Y Y N N N A N N N N N A Y Y Y N N N A N N N N N A Y Y Y N N N N A A N A N A Y Y Y N N N N A N A N A A Cup holder: o18 on center standards. oon Cast iron end panels (509, 573, 574, 575, 576). oon ADA for 21 onward. osc cup holder on metal encased end panels (501, 502, 503, 504, 505). oon Concave full length end panel (522) oon stationary chair types for widths under 21. Scroll armrest with Concave full length end panel (522). Y Y Y A N N N A A N A N A Planetarium Y Y Y A N N N A N A N A A Accessories 19mm [¾ ] thick 2 19mm [¾ ] thick 2 13mm [½ ] thick 2 Shadow Box 1 N N N N A A N N N N A N s will be reduced by one size when using tablet arms. Electric data port is available on widths over 21 with a maximum slope 4. Shadow Box only available on fixed centers and cannot use tablet arms neither plastic arms. ADA armrest available with Tivoli button light only (if required). Light strip is not available with cup holder. It is available with wood or polyurethane armrests. N N N A A N N N N N N N N N N A N A N N A N N A It is not permitted: Tablet arm with cup holder. Tablet arm on ADA end panel. Cup holder and/or tablet arm on Cast iron end panels and Palace end panel. N N N A N N A A A N N N
Component Standard Tablet (84.5 in 2 ) Accessories 19mm [¾ ] thick 2 Oversize Tablet (109 in 2 ) Graduate Tablet (151 in 2 ) Number and Letter Plates Book Racks Envelope Holder Lights On Lights On End Panel Movable Base 19mm [¾ ] thick 2 13mm [½ ] thick 2 Shadow Box 1 Electric Data Port Embroidery N N N N N N N N N N A N w/ Tablet Arm N N N A A N N N N N N N A A A A N N N N A A N N A A A A N N A N A A N N N N N N A A N N N N A N N N N A A N N N N N N N N N N A N N N N A N N N N N N A N N A A A N N N N N N N N N N N N N A N Planetarium N N N A N N N N N N N N N N N A N N N N N N N N N N N A N N A A N N A N Materials Metal Components parts (SAE 1010 0 1018): 1 x 3 (25mm x 76mm ) rectangular tube structure. Sheet metals (vary). Wood Components: Plywood (panels) Hardwood (armrests) Others: High impact polypropylene copolymer (seat frame, outer back) Polyurethane (foam-meets California Bulletin 117) High grade fabrics (meets California Bulletin 117) Powder coat paints (meets ASTM and qualicoat standards) Zamac (meets ASTM B 86-04). General Finishes 1 Fully Upholstered / 2 Plastic Laminate / 3 Painted / 4 Stained