WELCOME TO ATEX ZONE 1: Industrial Ethernet from Hirschmann. Modular system consisting of a MICE switch with microfx media module and an op-is microfx transceiver MICE switch for installation in Ex zone 2 Op-is approved fiber optic connector and cable for ATEX zone 1 SIMPLY A GOOD CONNECTION
MICE SWITCH WITH microfx TECHNOLOGY FOR ATEX ZONE 1 There is a system behind every revolution. Hirschmann now delivers all of the advantages of Industrial Ethernet at the process level. Requirements and Solutions In the future, customers will be able to fully exploit the advantages of Industrial Ethernet at the process level in ATEX zone 1 applications. To deploy Ethernet as the seamless standard across all levels of the network hierarchy, users need connectivity technology which meets stringent zone 1 safety standards. As an Industrial Ethernet pioneer and a leading supplier of switches, Hirschmann is approaching the challenge at the controller level. Using its extensive experience base, Hirschmann has developed a connectivity solution which supports the deployment of Industrial Ethernet in ATEX zone 1. The advantages of the solution are inherent to the system design. microfx connectors and cables connected to integral microfx transceivers in the zone 1 I/O devices provide a safe, reliable link to a high-performance modular MICE switch in zone 2. The op-is (optically inherent safe) approved optical port on the MICE switch plays a crucial role. This technology opens up a whole new range of possibilities for manufacturers of zone 1 I/O devices and for the Industrial Ethernet community in general. Hirschmann delivers solutions which meet demanding customer and market expectations, reinforcing the company s position as a supplier of leading-edge solutions. Seamless IT infrastructure reflects Hirschmann s expertise in delivering solutions for the process industry. Don t be left behind. Join the Industrial Ethernet world and talk with us about your individual device requirements in zone 1. We are always at your side when you are looking for an experienced development and integration partner or a source of outstanding interface technology. Product features Op-is approved microfx components are the crucial components in the new system which provides connectivity between ATEX zone 1 devices and high-performance Fast-Ethernet switches. The complete system consists of a MICE switch, a microfx cable and an integral transceiver in the I/O devices. This intelligent and innovative system solution from Hirschmann covers the entire range of zone 1 applications including embedded solutions.
HIRSCHMANN 8 / 2011 Safe Zone 2 MICE op-is module with 4 integrated microfx transceivers op-is op-is MICE op-is module with 4 integrated microfx transceivers Zone 1 op-is op-is op-is op-is op-is op-is I/O modules with microfx transceivers MICE Fast-Ethernet module Media module for MICE switches microfx transceiver For Multimode fiber, op-is approved microfx port 100 Base-FX Multimode F/O, op-is approved optical ports microfx cable assembly With manufacturable microfx connector
8 / 2011 INDUSTRIAL ETHERNET SOLUTIONS FROM HIRSCHMANN The best connection to your production process. Applications Hirschmann s new intrinsically safe microfx connectivity technology brings high-speed Ethernet performance to Ex zones in chemical plants, offshore platforms and oil refineries. You can depend on Hirschmann. We have the expertise to help you integrate your I/O devices into the Industrial Ethernet environment and exploit the advantages of seamless network architecture at the industrial and process level.
8 / 2011 Hirschmann Competence Center Hirschmann delivers more than just top-quality network components. The Hirschmann Competence Center offers consulting, service, support, training and expertise to help you integrate your devices into Industrial Ethernet networks or to develop and deploy your total Ex solutions. Talk to us about your individual requirements. www.hicomcenter.com
8 / 2011 ATEX MICE switches Product name Product description MM20-M5M5M5M5EDHH Description Media module for MICE switches (MS ), 100 BASE-FX multi-mode F/O optically inherent safe Type MM20-M5M5M5M5EDHH Port type and quantity 4 x 100 BASE-FX, MM cables, microfx Order No. 943 938-003 Network size length of cable Multimode fiber (MM) 50/125 μm 0 5000 m 8 db link budget at 1300 nm A = 1 db/km, 3 db reserve, B = 800 MHz x km Multimode fiber (MM) 62,5/125 μm 0 4000 m 11 db link budget at 1300 nm A = 1 db/km, 3 db reserve, B = 500 MHz x km Power requirements Operating voltage Power supply via the backplane of the MICE switch Power consumption 7 W Ambient conditions Operating temperature 40 C up to + 70 C Storage/transport temperature 40 C up to + 70 C Protective paint on PCB Default Relative humidity (non-condensing) 10 % up to 95 % MTBF 40 years; MIL-HDBK 217F: Gb 25 C Mechanical construction Dimensions (W x H x D) 38 mm x 134 mm x 118 mm Mounting Backplane Weight 180 g Protection class IP20 Mechanical stability IEC 60068-2-27 shock 15 g, 11 ms duration, 18 shocks IEC 60068-2-6 vibration 1 mm, 2 13.2 Hz, 90 min.; 0.7 g, 13.2 100 Hz, 90 min.; 3.5 mm, 3 9 Hz, 10 cycles, 1 octave/min.; 1 g, 9 150 Hz, 10 cycles, 1 octave/min. EMC interference immunity EN 61000-4-2 electrostatic discharge (ESD) 6 kv contact discharge, 8 kv air discharge EN 61000-4-3 electromagnetic field 10 V/m (80 1000 MHz) EN 61000-4-4 fast transients (burst) 2 kv power line, 1 kv data line EN 61000-4-5 surge voltage Power line: 2 kv (line/earth), 1 kv (line/line), 1 kv data line EN 61000-4-6 conducted immunity 3 V (10 150 khz), 10 V (150 khz 80 MHz) EMC emitted immunity FCC CFR47 Part 15 FCC CFR47 Part 15 Class A EN 55022 EN 55022 Class A Approvals Safety of industrial control equipment cul 508 (E175531) Hazardous locations cul1604 Class 1 Div 2 op-is, RL 94/9/EG (ATEX 95) Ex II 3 G op-is Scope of delivery and accessories Scope of delivery Module, operating manual Accessories to order separately ML-MS2/MM labels
8 / 2011 Cable assemblies Product name Product description EM12FX2M PUR2x62,5L0200 EM12FX2M Description microfx cable assembly Multimode fiber 2 x 62.5 μm; includes protection cap Type EM12FX2M PUR2x62,5L0200 EM12FX2M Order No. 934 572-007 Type of contact Male Number of contacts 2 (optical) Cable material PUR Cable color Purple Cable length 2 m Conductor size 62.5 μm (optical) Housing Color Black Material Contact material Ceramics Contact bearer material PA Housing material PA O-Ring NBR Environmental conditions Protection class (IEC 60529) IP65 / IP67 Pollution severity 3 Temperature range 20 C up to + 70 C Packing unit Packaging unit 10 pieces Other standard types Cable length 5 m Order No. 934 572-008 Cable length 10 m Order No. 934 572-009 Other cable lengths on request Scope of delivery and accessories Accessories to order separately Fits into microfx transceiver, adapter or feed-through Transceiver Product name Product description Description Type EF12H FXM AX1 100 Base-FX Transceiver microfx for Multimode fibers 1310 nm, 100 Mbps with metal housing, acc. to IEEE 802.3, with FDDI PMD standard; incl. protection cap and mounting screw EF12H FXM AX1 Order No. 934 545-004 Type of contact Female Number of contacts 2 (optical) Diagnostics Signal detect, TX disable led out via pin Standard ISO/IEC 9314-3, housing: in support of IEC 61076-2-101 (Ed. 1) Housing Color Silver Technical data Wave length 1310 nm Output level 20 dbm Input level 31 dbm Data rate 100 Mbps Data interface PECL Power supply DC 3.3 V Current consumption DC 295 ma Material Contact bearer material PA Housing material Cu Zn/Ni O-Ring Viton Environmental conditions Protection class (IEC 60529) IP65 / IP67 (mated) Pollution severity 3 Temperature range 40 C up to + 85 C Packing unit Packaging unit 20 pieces
Regarding the details in this brochure: The information/details in this publication merely contain general descriptions or performance factors which, when applied in an actual situation, do not always correspond with the described form, and may be amended by way of the further development of products. The desired performance factors shall only be deemed binding if these are expressly agreed on conclusion of the contract. Please note that some characteristics of the recommended accessory parts may differ from the appropriate product. This might limit the possible operating conditions for the entire system. DS 280 720-067 Edition 1 0408 Hirschmann Automation and Control GmbH Printed in Germany Production bases Sales subsidiaries Selected distribution partners Hirschmann_Atex_Zone-1_Brochure_en_0811.pdf Helsinki tel. +358 9 540 4940 automation@klinkmann.fi St. Petersburg tel. +7 812 327 3752 klinkmann@klinkmann.spb.ru Moscow tel. +7 495 641 1616 moscow@klinkmann.spb.ru Yekaterinburg tel. +7 343 376 5393 yekaterinburg@klinkmann.spb.ru Samara tel. +7 846 273 95 85 samara@klinkmann.spb.ru Кiev tel. +38 044 495 33 40 klinkmann@klinkmann.kiev.ua Riga tel. +371 6738 1617 klinkmann@klinkmann.lv Vilnius tel. +370 5 215 1646 post@klinkmann.lt Tallinn tel. +372 668 4500 klinkmann.est@klinkmann.ee Мinsk tel. +375 17 200 0876 minsk@klinkmann.com