Rev3-09-07-2010
Table of contents Important Safety Instruction...1 Preparation Before Using The Quantum DVD Player...2 Unpacking and Checking the Contents...2 Control Reference Guide...3 The Quantum DVD Player...3 The TFT Color LCD Monitor...6 The IR Remote Control...8 Connections...9 Basic Operations...10 PAL-NTSC Selection...10 Disc Loading...10 Pause/Stop/Play...11 Select Menu Items...11 Advanced Operations...11 Select a Specific On-Disc Menu Section...11 CD Disc/Track Selections...11 Fast Forward...12 Fast Backward...12 Skip to the Next Chapter or Track...12 Skip to the Previous Chapter or Track...12 Select a Track...12 Display the Track List...12 Repeat...13 Select Subtitle...13 On Screen Display (OSD)...13 For DVD Discs...13 For CD Discs...14 FM Frequency...14 Zoom...14 Memory Play...15 Slow Play...15 System Settings...16 MP3/MPEG4 Playback...24 Play Mode...25 Other Functions...25 Quantum DVD Player Installation...26 Compatible Disk Types...27 Technical Specifications...28 NOTES 29 of 29
Specifications: Technical specifications Multimedia player supports: DVD, DVD-R, DVD-RW, DVD+R, DVD+RW, CD, CD-R, CD-RW, VCD, SVCD, MP3 and JPG picture disks. MPEG4 support: DivX 3.11/4.02/5.02/5.03/5.05 DivX Pro Electronic Shock Protection (ESP) and Mechanical Shock Protection PAL/NTSC compatible Multi Lingual On Screen Display (OSD) Integrated Dome Lights with Door Sensor Connections A/V input via RCA connectors USB Connector SD Card Reader (VZ1100 Only) Multi- Menu Selection Kit Content: Quantum DVD Player (2) - Wireless Headphones (Batteries Included) Remote Control (Battery Included) Metal Mounting Bracket & Miscellaneous Hardware A/V Cables User Manual Quantum Specifications: Quantum Model Quantum 8500 Quantum 1100 Weight < 2.0 KG < 3 KG Dimension (W x H x L) mm 292 x 180 x 51 355 x 254 x 65 Power Consumption FM Stereo Transmitter IR Carrier Frequency TV Signal System Laser Frequency Range S/N 65 db Dynamic Range > 85 db Harmonic Distortion 0,01% Input Sensitivity 500 mv Operation Temperature 0 C ~ 40 C Storage Temperature -15 C ~ 50 C 12V DC (1 1-15V) /1.4A (Max 1.6A) 88.5MHz / 88.7MHz / 88.9MHz / 89.1MHz / 89.3MHz 89.5MHz / 89.7MHz / 89.9MHz 2.3 / 2.8 MHz PAL/NTSC/MULTI Semi-conductor laser, wave length 600nm, 780nm 48 KHz pulse modulation 20 Hz ~ 22 KHz 96 KHz pulse modulation 20 Hz ~ 22 KHz 28 of 29 Welcome Congratulations on your purchase of a Vizualogic Quantum DVD Player. This system will provide your family with many years of enjoyment. This sophisticated product provides video entertainment to rear seat passengers without altering the appearance of your vehicle s original interior. Reviewing this owner s manual thoroughly prior to operation will provide you with the best performance and help explain the simple requirements for proper care. Important safety instructions C A U T I O N RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: CAUTION: The unit employs a laser system. To ensure proper use of this product, please read this owner s manual carefully and retain for future reference. Should the system require maintenance, contact an authorized service location, see service procedure. Use of controls, adjustments of the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, DO NOT try to open the enclosure. Visible laser radiation may be present when the enclosure is opened. DO NOT stare into the laser beam. FCC regulations states that any change or modification to the equipment, not expressly approved by the maker or its authorized parties could void the user s authority to operate this equipment. NOTE: Please dispose of empty batteries according to local regulations in your country. All On-Screen-Displays (OSD) and pictures will be based on the English version. Design and Specifications may vary in the manual from the actual product in use. 1 of 29
Preparation before using the Quantum Unpacking and Checking the Contents Please check if the following items are included in the package: Mounting Bracket EVA Foam Trim Ring Owner s Manual One Vizualogic Quantum DVD Player (8500 Model Shown) One IR-Remote Control Single Channel IR Headphones (2) 4" Trim Ring (Sold Separately) Compatible disk types Some DVD discs may have special requirements for playing, with which this system may not compatible. Please refer to the specifications on the individual disc. DISC TYPE Content Size Total Play Time DVD AUDIO/VIDEO 12CM About 4.7 GB - 2 hrs. (Single Side & Single Layer) About 8.5 GB - 4 hrs. (Single Side & Double Layer) About 9.4 GB - 4 hrs. (Double Side & Double Layer) About 17 GB - 8 hrs. (Double Side & Double Layer) CD-DA AUDIO 12CM About 700 MB - 74 Minutes MP3 MP3 AUDIO 12CM About 700 MB - 300 Minutes Discs Types The Quantum DVD Player can play the following disc types: DVD / CD / CD-R / CD-RW / DVD-R / DVD-RW / DVD+R / DVD+RW. Please DO NOT play discs smaller than 12cm or odd shape discs. Or discs recorded with other systems, such as SECAM. File Type The Quantum DVD Player can play the following file types: Music: WMA (.wma), CD (.cda), MP3 (.mp3) Video: VCD (.dat), DVD (.vob), AVI (.avi BELOW 720.480, DivX 3.11 / 4.02 / 5.02 / 5.03 / 5.05 DivX Pro) Picture: JPEG (.jpeg). Region Code The region code for this player is 1 which indicate North America. Copyright According to the related laws, DVD discs without proper authorization are not allowed to be copied, broadcast, cable broadcast, or played publicly with the Vizualogic Quantum DVD Player. The Vizualogic Quantum DVD Player incorporates copyright protection technology that is protected by method of claims of certain U.S. patents and other Intellectual Property Rights owned by their rights owners. Reverse engineering or disassembly is prohibited. 2 of 29 27 of 29
Quantum DVD Player Installation Control reference guide Fig. 1 The Vizualogic Quantum 8500 1 2 3 4 6 7 8 9 5 11 Mounting Bracket 19 10 Tapping Screws (not included) 12 13 14 18 17 16 15 Mounting Bolts (M5 x 6) or (M5 x 12) - Determine the mounting location and drill four (4) mounting holes (Fig. 1). - Attach the mounting bracket to the holes with tapping screws (not included). - Open the monitor to display the four (4) screw holes. - Attach the unit to the bracket with the mounting bolts (M5x6 or M5x12). - When the installation has completed, you can also turn the display upward or downward to adjust the viewing angle. (See the arrowhead symbol in Fig. 2). Please note that this is a universal item and may require additional components such as screws (not included) to complete the installation. Professional installation is suggested. 26 of 29 Fig. 2 1+9 Dome Light 11 Release Button 2 Power 12 Dome Light - On 3 Play / Pause / 13 Dome Light - Door 4 Stop 14 Dome Light - Off 5 Disc Slot 15 Right Input 6 Previous 16 Left Input 7 Next 17 Composite Video Input 8 Eject 18 USB 10 8.5 Inch LCD Screen 19 Infrared Sensor 3 of 29
Control reference guide The Vizualogic Quantum 1100 Misc Enter this menu to setup the misc settings of the player. and activate/disactivate screen saver. Video Use Default Settings Region :1 Rating Misc Exit Use Default Settings: The player will return to the factory default settings. Video Use Default Settings Use Default Settings Rating Misc Do you want to use default setting? Yes No 1+9 Dome Light 11 Release Button 2 Power 12 Dome Light - On 3 Play / Pause / 13 Dome Light - Door 4 Stop 14 Dome Light - Off 5 Disc Slot 15 Right Input 6 Previous 16 Left Input 7 Next 17 Composite Video Input 8 Eject 18 Infrared Sensor 10 11 Inch LCD Screen 19 USB 20 SD Card Slot Exit Exit Enter this menu to Exit setup Video Rating Misc Exit 4 of 29 25 of 29
Parental Control 8.5 inch TFT color LCD Monitor (8500) Highlight "Parental control ", then press ENTER button to enter the setting menu. Enter the password when prompt and press ENTER to change the setting: 1. Kid Safe 2. G 3. PG 4. PG-13 5. PG-R 6. R 7. NC-17 8. Adult Change Password Highlight "Set Password", and press the ENTER button to enter the setting menu. Input the current 4 digits password and press the ENTER button. Then enter the new 4 digit password and press ENTER to save. 1. Control Sensor Pick Up 2. TFT 3. SRS 4. UP 5. Menu Selection: Brightness, Saturation, Sharpness, Contrast, Reset 6. Down 1. 1 - Press the [POWER] button to power on or off the TFT color LCD Monitor. 2. 2 - Press the [MENU] button to toggle between Brightness, Color, Contrast, Tint, and adjust the level with the [ ] or [ ] button. Default Setting Password Parental Control : 8888 :8.Adult 24 of 29 5 of 29
11 inch TFT color LCD Monitor (1100) Enter this menu to setup the digital audio output. Video Night mode Down sampling :OFF :OFF Night mode: OFF/ON Down sampling: OFF/ON Rating Misc Exit 1. TFT 2. SRC 3. Down 4. Menu Selection: Brightness, Saturation, Sharpness Contrast, Rest 5. UP 6. Control Sensor Pick Up 1. Press the [POWER] button to power ON or OFF the TFT color LCD Monitor. 2. Press the [MENU] button to toggle between Brightness, Color, Contrast, Tint, and adjust the level with the [ ] or [ ] button. NOTE: The TFT color LCD is made of glass and liquid, do not apply pressure on the scree to prevent breakage and poor image quality. Do not scratch the screen surface with hard materials and only clean with a soft dry cloth. Rating Enter this menu to setup the rating level of the player and to change the password. Video Rating Misc Exit Parental control Set Password : 8 Adult 6 of 29 23 of 29
SETUP MENU Press the SETUP button to enter the DVD On Screen Display (OSD) setup menu. Highlight the desired icon and press ENTER to activate the setting sub menu. Enter this menu to setup the OSD language, DVD disc subtitle,and DVD disc start menu. : English The IR Remote Control Point the remote control no more than 3-4 meters (approx. 21 feet) from the remote control sensor on the front of the player. Keep remote within a ± 30 angle. 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Video Subtitle : OFF Exit Video Rating Misc DIVX Subtitle DVD menu : English : English Enter this menu to setup the video setting 1. Adjust Decrease 2. Adjust Increase 3. Title 4. Eject 5. Number Buttons 6. Clear 7. Slow 8. Program 9. Mute 10. Repeat 11. Zoom 12. Play / Pause 13. Right Arrow 14. Stop / Return 15. Fast Reverse 16. Fast Forward 17. Previous 18. Next 19. Monitor Menu 20. Power 21. Menu/PBC 22. Source 23. Subtitle 24. Display 25. 26. USB / SD 27. Up Arrow 28. Setup 29. Enter 30. Left Arrow 31. Down Arrow 32. FM 33. Volume + 34. Volume - Video Rating Misc Aspect Ratio View mode TV System Smart picture : 16:9 : Auto Fit : Multi :Dynamic Exit Aspect Ration: 4:3/16:9 View mode: Fill/original/Auto Fit/Pan scan TV System: NTSC/PAL/MULTI Smart picture: Standard/Bright/Sofe/Dynamic 21 of 29 7 of 29
NOTE: The distance may vary according to the brightness of ambient light. If the remote is not used for an extended period of time, remove the batteries to prevent possible damage from battery leakage and/or corrosion. DO NOT place any objects between the remote control unit and the sensor on the Quantum 8500. DO NOT use the remote control unit while simultaneously operating a remote control unit from another device. They may interfere with each other resulting in improper operation. Depending on usage, the batteries in the remote control should normally last for about one year. If the remote control isn t working, replace the batteries with new batteries and try again. DO NOT mix old batteries with used ones. DO NOT mix rechargeable batteries with non-rechargeable batteries. Incorrect usage of batteries may cause them to leak, corrode or explode. If leakage from the batteries occur, properly clean the battery compartment before attempting to install new batteries. Make sure the IR sensor is not obstructed by any objects. OSD - Photo CD Mode Playback Status Current File / Total Files 05/37.. 004_1 005_2 006_3 /PICTURES/007_4.JPG Repeat mode (Press ENTER to adjust) Single All Off Filter Repeat : Off Mode : Normal Highlight Selection (Press ENTER to start playback) 007_4 008_5 009_6 010_7 W: 3008 H: 2000 Image Rotation Press CURSOR button to rotate photo. UP : rotate 180 counter-clockwise DOWN: rotate 180 clockwise LEFT : rotate 90 counter- clockwise RIGHT : rotate 90 clockwise 8 of 29 22 of 29
OSD - CD mode Playback Status Playback Time Track Elapsed/Track Time 00:00:38/00:03:39 04/17 /Track04.CDA Repeat mode (Press Enter button to adjust) Single All Off connection Connect the Quantum DVD Player to an external DVD/GAME unit using the a standard RCA Cable (NOT INCLUDED). Quantum 8500 & 1100 Disc Track Current Track/ Total Tracks Highlight Selection (Press the ENTER button to start playback) Track01 Track02 Track03 Track04 Track05 Track06 Track07 Track08 Filter Repeat : Off Mode : Normal Music Playing DVD/GAME - Composite Video (YELLOW) - Right (RED) - Left (WHITE) 20 of 29 9 of 29
PAL-NTSC Selection basic operations To set up The Quantum DVD player according to the connected TFT LCD monitor and video signal system, to play a DVD or any other video discs, follow these guidelines: If the TFT LCD monitor is NTSC, press the N/P button on THE Quantum DVD Player until you see NTSC on your screen. If the TFT LCD monitor is PAL, select PAL by pressing the N/P button on the screen until you see PAL on the display. If the TFT LCD monitor supports both PAL and NTSC, select MULTI by pressing the N/P button until you see MULTI on the screen. Disc Loading Load one disc with the label side facing upwards and make sure you do not touch the data side with your fingers. ON SCREEN DISPLAY ON SCREEN DISPLAY Press Display button, an On Screen Display (OSD) indicator will be displayed at the upper part of the TV screen in displaying the disc information and operation status. OSD - DVD Mode 1 2 Time 00:34:44/01:32:10 Title 1/4 Disc Title / Current Title / Total Disc Titles Playback Time / Disc Elapsed / Disc Time 2 Chapter 3/7 Chapter / Current Chapter / Total Chapters Note: Do not touch the content side of a disc. Do not stick any paper or stickers on the disc. Do not force the disc into the player. Damage to the disc or the player may occur if a disc is not placed correctly on the guides in the disc tray. Finger prints and dust on the disc surface can affect the sound and picture quality. Clean the discs regularly with a soft cotton cloth from the disc center to the outside of the disc. Do not clean in a circular motion. Do not use any solvents, such as diluting agents, gasoline, liquid detergent and etc; this may cause serious damage to the disc. Keep discs away from direct sunlight or any heat sources. The Quantum DVD Player is a precision device. If the optical pick-up lens and disc drive parts become dirty or worn down, picture quality will become poorer. To obtain a clear picture, regular inspection and maintenance are recommended every 1,000 hours of use, depending on the operating environment. 3 4 5 6 1/2 5.1 Ch Eng Multi- / Current / Total Tracks Disc Subtitle Multi-Angle Subtitle Angle 1/2 Bitrate 3/3 Eng 5.35Mbps Format - 5.1 CH -2 CH Current Subtitle / Total Disc Subtitles Current Angle / Total Angles Name of Current Track Once the disc is loaded, the unit will automatically start reading the disk and will take a few seconds to download the disc initial data. Thereafter, the disc type will be displayed in the left upper corner of the LCD screen and the unit will start playing the disc. Bitrate / Current Bitrate Rating 10 of 29 19 of 29
3 Press the DOWN cursor button to highlight the MODE function and press ENTER to select the mode. The unit has 4 different mode settings. Stop 04/17 /Track04.CDA Track01 Track02 Track03 Track04 Track05 Track06 Track07 Track08 Filter Repeat:OFF Mode:Normal JPEG Preview Music playing NORMAL SHUFFLE RANDOM MUSIC INTRO NOTE Some DVD discs do not allow programming. CD, MPEG4 and Picture CD programs are only available on activate Edit function. Single track disc cannot be programmed. Pause / Stop / Play When a disc is playing, pressing the PAUSE button on the remove control or on the Quantum player will pause the playback of the disc. Pressing the PLAY button on the remote control or the Quantum player will resume playback. Press the STOP button on the remote control or the Quantum player to stop playback of the disc. The unit will remember the position of the disk and will continue playback from that position if the PLAY button on the remote control or on the Quantum player is pressed. Press STOP twice to completely stop playing a disc. When the PLAY button on the remote control or the Quantum player is pressed, the unit will not resume play from the position the disc was interrupted at. NOTE: The disc continues to spin for approximately four (4) minutes after pressing the STOP button. Selecting Menu Items In either the disc menu or the setup menu: ** Press the arrow / / / buttons to move between selectable items. ** Press the PLAY button to confirm and/or execute a selection. Using the USB Slot SD Card and USB Operation Insert a standard USB thumb drive into the USB Slot. The USB reader can decode the same file formats as the DVD/CD loader. Using the SD Card Reader (Not Available on VZ8500) Insert a standard SD Card into the SD Card reader with the label facing up. The SD Card reader can decode the same file formats as the DVD/CD loader. ADVANCED OPERATION Select a specific on-disc Menu section When the DVD disc contains an on-disc menu, you can access this menu by pressing either the MENU button on the remote control or on the Quantum player. (Note: PBC must be turned on.) ** Press the MENU button to display the DVD menu (if available) and the selection choices. ** Use the arrow buttons to scroll through the displayed sub-menu items. Press ENTER to confirm the selection. ** Alternatively, use the Number buttons to make a selection. For example: To select the 13th song, press 10+ then 3. 18 of 29 11 of 29
CD discs track selection You can select/play songs via the number buttons. If the track number is lower than 10, press a number button 1-9 to select the desired track. For example: to select the 8th track, press number 8. To select track numbers beyond 10, first press 10+, followed by a single digit number button (1-9). For example: To select the 12th song, press button 10+ then press button 2. Fast Forward While the video is playing, press the Fast Forward FWD button on the remote control or the Quantum DVD Player to play the video in Fast Forward (FFWD) mode. Five different speeds are available and depend on the number of times this button is pressed in sequence. 2x 4x 8x 16x 32x Normal Play (DVD) 2x 4x 8x 16x 32x Normal Play (Other Discs) Fast Backward While the video is playing, press the Fast Backward REV button on the remote control or the Quantum DVD Player to play the video in Fast Backward (FRWD) mode. Five different speeds are available and depend on the number of times this button is pressed in sequence. 2x 4x 8x 16x 32x Normal Play (DVD) 2x 4x 8x 16x 32x Normal Play (Other Discs) Skip to the next chapter or track When a DVD disc is playing, press the NEXT button on either the remote control or the Quantum DVD Player to skip to the next chapter. When other discs are played, press this button to skip to the next track. NOTE: Whether this function works depends on the disc type in use. Skip to the previous chapter or track When a DVD disc is playing, press the PREVIOUS button on either the remote controller of the Quantum DVD player to skip to the previous chapter. When other discs are played, press this button to skip to the previous track. NOTE: Whether this function works depends on the disc type in use. Select a track There are two options to select a next track. 1. Press either the PREVIOUS or the NEXT button as described above. 2. Press one or more of the NUMBER 0-9, 10+ buttons to enter the desired track number. When the screen is displaying a, this function is not available. Reasons: A) The tracks on the disks are not numbered; B) The entered number is incorrect: C) PBC is on, press the PBC button on the remote control to switch PBC off. Display the track list With PBC switched on and while the DVD disc is playing, press MENU to display the track list. Select a track with the up or down arrow and press ENTER to confirm your track selection. CD/MPEG4/Picture CD program menu Load a CD, MPEG4 or Picture CD disc, the file manager menu will display on the screen. 1 Press the RIGHT cursor button to highlight the "Filter" and press the ENTER button to activate the Filter function. Press arrows to select "AUDIO, PHOTO, VIDEO, BIN". 2 Stop 04/17 /Track04.CDA Track01 Track02 Track03 Track04 Track05 Track06 Track07 Track08 Stop 04/17 /Track04.CDA Track01 Track02 Track03 Track04 Track05 Track06 Track07 Track08 Filter Repeat:OFF Mode:Normal JPEG Preview Music playing Filter Repeat:OFF Mode:Normal JPEG Preview Music playing PHOTO VIDEO Press the REPEAT cursor button to highlight your desired track and press the ENTER button to select. It has 4 different options: OFF, SINGLE, FOLDER, ALL. Stop 04/17 /Track04.CDA Track01 Track02 Track03 Track04 Track05 Track06 Track07 Track08 Filter Repeat:OFF Mode:Normal JPEG Preview Music playing OFF SINGLE FOLDER ALL 12 of 29 17 of 29
PROGRAM SETTINGS Program to play a DVD disc in a desired sequence automatically. DVD setting menu Load a DVD disc. 1 2 3 1 2 3 PLAY Clea program Press Program button to enter the setup menu. Press UP or DOWN button to highlight the desired title and then press ENTER button to enter chapter program. Press PLAY icon and enter button to start the program play. If you want to cancel program play, press the clear program icon, all programmed will be clear up Repeat While a disc is playing, press the REPEAT button to select one of the available repeat modes. 1. For DVD discs: a. Press REPEAT to repeat a chapter. b. Press REPEAT again to repeat a title. c. Press REPEAT again to exit the repeat mode. 2. For non-dvd discs and when PBC is switched off: a. Press REPEAT to repeat a single. b. Press REPEAT again to repeat the folder. c. Press REPEAT again to the entire disc. d. Press REPEAT again to exit the repeat mode. Select Subtitle Press the SUBTITLE button to select the caption language e.g. English, Dutch, Spanish, etc. Press the SUBTITLE button various times until you have selected the desired language. NOTE: Whether this function works depends on the disc type in use. On Screen Display (OSD) REPEAT OFF SINGLE FOLDER REPEAT OFF The DISPLAY button can be pressed on the remote control to check the playing time and the remaining time for each title/chapter/track. Also, it can display the remaining time for the whole discs. ALL For DVD Discs Press the DISPLAY button once, the screen will show the elapsed time for the current title... TITLE ELAPSED 01/01 C: 02/25 00:06:08 Press the DISPLAY button twice, the screen will show the remaining time for the title. TITLE REMAIN T: 01/01 C: 02/25 1:30:08 16 of 29 13 of 29
For CD Discs To check the remaining time on a current track, press the DISPLAY button. The screen shows TC, this is the current track played. Hereafter, there are three (3) levels of zoom-out functions available. Pressing the Zoom button will change the view in the following sequence: TC T:04/10 00:03:08 Press the DISPLAY button twice and the screen will show the remaining time for the current track. TR T:04/10 00:03:08 Press the DISPLAY button for a third time and the screen will show the elapsed time for the current disc. Press the DISPLAY button for a forth time and the screen will show the elapsed time for the current chapter. FM Frequency Push this button to select the FM Modulator (Transmitter) frequency; at the same time, the monitor will display which frequency you have selected. Now adjust the frequency on the vehicle's radio to match the frequency shown on the monitor. (Frequency setting sequence: 88.5, 88.7, 88.9, 89.1, 89.3, 89.5, 89.7, 89.9) ZOOM This feature is used to zoom-in and/or out on the video images or still images playing on the DVD discs. There are three (3) levels of zoom-in function available. Pressing the Zoom button will change the view in the following sequence: X1 With the imaged zoomed, the ( / / / ) arrow buttons will allow you to pan through the zoomed images. To return to normal screen size, press the ZOOM for the 7th time. Memory Play The Multimedia player can memorize the last stop point and play form this point onwards when the unit is switched on again or when play is press again. When playing, press the STOP button once to stop the playback. The Quantum player will memorize the current position on the disc. Press the PLAY button to start playing from the last memorized position. Pressing the STOP button twice will clear the memorized position from the memory and if play is resumed, the disc will be played from the beginning. Slow Play While playing, push SLOW to play video slowly at different speeds. This option can be used to play the disc slow forward or backwards. Four speeds are available for either the slow forward or backwards option. Push SLOW once, the speed decreases by one shift, finally it returns to normal state. - - 1/2 1/4 1/8 1/16 1/2 1/4 1/8 1/16 Normal Mode X2 X3 14 of 29 15 of 29