P.O. Box 10 04 44 83004 Rosenheim Germany KATHREIN-Werke KG ist jetzt KATHREIN-Werke KG is now Rosenheim, 01.05.2018 Anton-Kathrein-Straße 1 3 83022 Rosenheim Germany Phone: +49 8031 184-0 Fax: +49 8031 184-306 www.kathrein.com Zum 1. Mai 2018 ist die KATHREIN-Werke KG auf die, einer Europäischen Aktiengesellschaft (Societas Europaea), übergegangen. Die neuen Firmendaten lauten seither wie folgt: Anton-Kathrein-Str. 1 3 83022 Rosenheim, Deutschland Steuer-Nr.: 156/117/30745 UST-Ident-Nr.: DE 131 558 540 Registergericht: Traunstein, HRB 24848 On 1 st May 2018, KATHREIN-Werke KG has been transferred to, a European stock corporation (Societas Europaea). Executive Board: Anton Kathrein (CEO), Joachim Döring, Elmar Geißinger, Jürgen Walter, Hans-Joachim Ziems Supervisory Board: Dr. Michael F. Keppel (Chairman) VAT Reg. No.: DE 131 558 540 Tax ID No.: 156/117/30745 WEEE Reg. No.: DE 38438502 GLN: 40 21121 00000 3 Registered Office: Rosenheim, DE Commercial Register: Traunstein, HRB 24848 Deutsche Bank AG IBAN: DE54 7007 0010 0833 7701 00 BIC: DEUTDEMMXXX Since then the company data is as follows: Anton-Kathrein-Str. 1 3 83022 Rosenheim, Deutschland Tax ID No.: 156/117/30745 VAT Reg. No.: DE 131 558 540 Commercial Register: Traunstein, HRB 24848 936.0000218a Page 1 of 1
Enables antenna and feeder sharing for two base stations in the same frequency band Suitable for two operators with frequency allocations within the same frequency band Very low Tx/Rx insertion loss compared to standard hybrid combiners Double unit for XPol antennas Suitable for indoor or outdoor applications DC/AISG by-pass for DTMA supply Tuning Diagram Technical Data Type No. 78211230 Double Unit Pass band BTS 1 (LTE/GSM1800 / Operator 1) BTS 2 (LTE/GSM1800 / Operator 2) Insertion loss Port 1 Port 3 / Port 4 Port 6 Port 2 Port 3 / Port 5 Port 6 Isolation Port 1 Port 2 / Port 4 Port 5 VSWR Impedance Input power Tx1 / Tx2 / Tx3 / Tx4 Rx1/Rx2 = 1710 1740 MHz, Tx1/Tx2 = 1805 1835 MHz Rx3/Rx4 = 1755 1785 MHz, Tx3/Tx4 = 1850 1880 MHz < 0.6 db (1710-1740 MHz) / < 0.5 db (1805-1835 MHz) < 0.5 db (1755-1785 MHz) / < 0.6 db (1850-1880 MHz) > 30 db (1710-1740 / 1755-1785 / 1805-1835 / 1850-1880 MHz) < 1.25 (pass bands) 50 Ω < 100 W / < 100 W / < 100 W / < 100 W Intermodulation products < -160 dbc (3 rd order; with 2 x 20 W) Temperature range -40... +60 C Connectors 7-16 female (long neck) Application Indoor or outdoor (IP 66) DC/AISG transparency (switchable) Port 1 Port 3 / Port 4 Port 6 Port 2 Port 3 / Port 5 Port 6 Lightning protection Mounting Weight Packing size (w x h x d) Dimensions (w x h x d) Stop By-pass (max. 2500 ma) 3 ka, 10/350 μs pulse Wall mounting: With 4 screws (max. 8 mm diameter) / Mast mounting: With additional clamp set 5.5 kg 367 x 307 x 185 mm 250 x 193 x 101 mm (without connectors, without mounting brackets) 78211230 Page 1 of 4
Accessories (order separately) Type No. Clamp set suitable for mast diameter of 734360 34-60 mm 734361 60-80 mm 734362 80-100 mm 734363 100-120 mm 734364 120-140 mm 734365 45-125 mm Clamp Set 50-Ohm load Type No. Description 78410367 50-Ohm load Block Diagram LTE / GSM 1800 LTE / GSM 1800 Please Note: As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of a mast mounted device or even cause it to fall to the ground. These facts must be considered during the site planning process. The Same-band Combiner is designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E and have passed environmental tests as recommended in ETS 300 019-2-4. The installation team must be properly qualified and also be familiar with the relevant national safety regulations. The details given in our data sheets have to be followed carefully when installing the combiners and accessories. The limits for the coupling torque of RF connectors, recommended by the connector manufacturers must be obeyed. Terminate unused inputs with a suitable 50-Ohm load, e.g. 784 10367. Any previous datasheet issues have now become invalid. Page 2 of 4 78211230
Typical Attenuation Curves BTS 1 (LTE/GSM 1800) Diagram I (Port 1 Port 3 / Port 4 Port 6) Diagram II (Port 1 Port 3 / Port 4 Port 6) BTS 2 (LTE/GSM 1800) Diagram III (Port 2 Port 3 / Port 5 6) Diagram IV (Port 2 Port 3 / Port 5 Port 6) 78211230 Page 3 of 4
Dimensions Page 4 of 4 78211230