This slick and modem luminaire ASD Shoebox has been designed to handle Catalog number any environment with a beautiful slim line design. Optional photocell allows Notes for further energy saving. Save even more by using a lower watt unit and Type still getting the light you need. Focus on your lumen needs, not on watts. Integrated cooling fin provides excellent thermal dissipation. This design allows the fixture to have extremely long lifetime hours. Light can be used at parking lots, sports courts, walkways and roadways, as street lights, and in a whole range of other applications. FEATURES AND BENEFITS: Easy to install, no need to carry the fixture when doing installation work; Lightweight die-cast aluminum housing Integrated cooling fin provides excellent thermal dissipation; Light Angle Type III-M light distribution Optional lenses allowing Type IV-M and Type V-M light distribution patterns are available Operating temperature of -49 F to 122 F Wet location IP5 L-7 life > 25, Hrs culus certified Design Lights Consortium (DLC) listed 135 HIGH LUMINOUS EFFICIENCY (Classification: Premium) 5-Year warranty ORDERING MATRIX: Family Modification Photocell Voltage Watts Dimmable CCT Finish Series ASD-LSB 3 P HV = High Voltage XX D 5 B PRM LED Shoe Box light 1 = 1 W Dimmable 5, K Bronze Premium 15 = 15 W 2 = 2 W LED SHOE BOX LIGHT: 3 = 3 W Model Watts Voltage Dimming Compatible CCT Lumens Dimensions (LxWxH) ASD-LSB3P-1D5B-PRM 1 1-277V Yes 5, K 12,91 lm 13 1/8" x 15 15/1" x 3 1/4" ASD-LSB3P-15D5B-PRM 15 1-277V Yes 5, K 18,939 lm 13 1/8" x 15 15/1" x 3 1/4" ASD-LSB3P-2D5B-PRM 2 1-277V Yes 5, K 25,98 lm 13 1/8" x 23" x 3 3/8" ASD-LSB3P-3D5B-PRM 3 1-277V Yes 5, K 39,9 lm 13 1/8" x 23" x 3 3/8" ASD-LSB3PHV-1D5B-PRM 1 2-48V Yes 5, K 12,7 lm 13 1/8" x 15 15/1" x 3 1/4" ASD-LSB3PHV-15D5B-PRM 15 2-48V Yes 5, K 19,5 lm 13 1/8" x 15 15/1" x 3 1/4" ASD-LSB3PHV-2D5B-PRM 2 2-48V Yes 5, K 2,4 lm 13 1/8" x 23" x 3 3/8" ASD-LSB3PHV-3D5B-PRM 3 2-48V Yes 5, K 39,9 lm 13 1/8" x 23" x 3 3/8" WebSite: www.asd-lighting.com Fax: 339-52-897
PRODUCT SPECIFICATIONS: Construction & Materials Lens PC Reflector Aluminum Housing Aluminum Finish Bronze Weight ASD-LSB3P-1D5B-PRM ASD-LSB3P-15D5B-PRM ASD-LSB3P-2D5B-PRM ASD-LSB3P-3D5B-PRM 9.5 lbs (4.3 kg) 9.72 lbs (4.42 kg) 14.43 lbs (.5 kg) 1.3 lbs (7.5 kg) Environmental System Work Environment Suitable for Wet Locations, IP5 Operating Temperature -49 to 122 ( -45 to 5 ) L-7 Life > 25, hrs Optical System Luminous Flux ASD-LSB3P-1D5B-PRM ASD-LSB3P-15D5B-PRM ASD-LSB3P-2D5B-PRM ASD-LSB3P-3D5B-PRM 12,91 lm 18,939 lm 25,98 lm 39,9 lm 12,7 lm 19,5 lm 2,4 lm 39,9 lm Color Temperature 5, K CRI >8 Electrical System Input Voltage 1~277V AC 5/ Hz / 18~528V AC 5/ Hz Max input current ASD-LSB3P-1D5B-PRM ASD-LSB3P-15D5B-PRM ASD-LSB3P-2D5B-PRM ASD-LSB3P-3D5B-PRM 1.2 A 2 A 3.2 A 4.3 A.38 A.38 A.8 A.5 A Inrush current ASD-LSB3P-1D5B-PRM ASD-LSB3P-15D5B-PRM ASD-LSB3P-2D5B-PRM ASD-LSB3P-3D5B-PRM A A 8 A 8 A 25 A 25 A 5 A 35 A Action time ASD-LSB3P-1D5B-PRM ASD-LSB3P-15D5B-PRM ASD-LSB3P-2D5B-PRM ASD-LSB3P-3D5B-PRM (Inrush current) 415μs 439μs 49ms 48μs 9μs 9μs 532μs 79μs AC input range min 1 V max 277 V AC input range High Voltage min 2 V max 48 V Off State Power W Power Consumption ASD-LSB3P-1D5B-PRM ASD-LSB3P-15D5B-PRM ASD-LSB3P-2D5B-PRM ASD-LSB3P-3D5B-PRM 1 W 15 W 2 W 3 W Power Factor.99 Output voltage ASD-LSB3P-1D5B-PRM ASD-LSB3P-15D5B-PRM ASD-LSB3P-2D5B-PRM ASD-LSB3P-3D5B-PRM 24-48 V 32-54 V 32-54 V 42-54 V 43-53 V 43-53 V 24-48 V 2.4-48 V Max output current ASD-LSB3P-1D5B-PRM ASD-LSB3P-15D5B-PRM ASD-LSB3P-2D5B-PRM ASD-LSB3P-3D5B-PRM 1.25-2 A 2-3. A 4.45-5.7 A 5.92-7. A 1.1-2 A 1.1-2 A 2.5-5 A 1.72-3.13 A LED Driver Class Class I Warranty & Certifications 5-year limited warranty DesignLights Consortium (DLC) listed culus certified E47384 WebSite: www.asd-lighting.com Fax: 339-52-897 The LED Shoe Box light is designed to install as a surface mounted luminaire.
Shoe Box Light 1 W, 15 W Shoe Box Light 2 W, 3 W 23 (584.1 mm) 15 15/1 (44.5 mm) 13 1/8 (333.8 mm) 3 1/4 (82.3 mm) 13 1/8 (333.8 mm) 3 3/8 (85. mm) 1 W 2 W LUMINOUS INTENSITY DISTRIBUTION DIAGRAM C PLANE ISOLUX DIAGRAM (UNIT:lx) MH(m) LUMINOUS INTENSITY DISTRIBUTION DIAGRAM C PLANE ISOLUX DIAGRAM (UNIT:lx) MH(m) 3 3-15 -/+18 15 4 5-15 -/+18 15 4 5-12 12-12 12 7 7-9 9 8-9 9 8 9 9 1 9 18-27 3 UNIT:cd -3 45 3 C/18,15.2 C3/21,139.2 C/24,9.5 C9/27,84.9 AVERAGE BEAM ANGLE(5%):119.2 DEG 1 11. 4.5 9. 4 38 31 23 15 77. 1. 38. 31. 23. S(m) 32-48 4-3 8 3 UNIT:cd C/18,155.1 C3/21,14.1 C/24,9. C9/27,84.1 AVERAGE BEAM ANGLE(5%):119. DEG 1 11. 4.5 9. 8 72 58 43 29 14 12 72. 58. 43. S(m) 15 W LUMINOUS INTENSITY DISTRIBUTION DIAGRAM C PLANE ISOLUX DIAGRAM (UNIT:lx) MH(m) 3 W LUMINOUS INTENSITY DISTRIBUTION DIAGRAM C PLANE ISOLUX DIAGRAM (UNIT:lx) MH(m) 3 3-15 -/+18 15 4 5-15 -/+18 15 4 5-12 12-12 12 7 7-9 9 8-9 9 8 13 9 1 9 2-39 52 UNIT:cd -3 5 3 C/18,155.1 C3/21,141. C/24,98. C9/27,84.5 AVERAGE BEAM ANGLE(5%):119.8 DEG 1 11. 4.5 9. 5 54 44 33 22 11 87. 54. 44. 33. S(m) 32-48 4-3 8 3 UNIT:cd C/18,155.1 C3/21,14.1 C/24,9. C9/27,84.1 AVERAGE BEAM ANGLE(5%):119. DEG 1 11. 4.5 9. 8 72 58 43 29 14 12 72. 58. 43. S(m) WebSite: www.asd-lighting.com Fax: 339-52-897
PACKAGE CONTENTS: Description Q-ty LED Shoe Box Light Fixture 1 Box 1 Installation Instructions 3 ELECTRICAL SCHEMATIC DIAGRAM Power connector 12~277V 5/ Hz L N G L (live/hot) connect black N (neutral) connect white Ground connect green L N G DRIVER Dim + (Violet) Dim - (Gray) Vaux (Black) FIXTURE EFFECTIVE PROJECTED AREA (EPA) RATINGS: LUMINAIRE EPA CHART-XALM 1W-15W 2W-3W S Single.8 1.1 D9 Double 9.98 1.28 D18 Double 18 1.5 1.9 T9 Triple 9 1.55 2 T12 Triple 12 1.55 2 Q9 Quad 9 1.55 2 WARNING RISK OF PERSONAL INJURY READ and follow all WARNINGS and installation instructions. Keep or give to the owner for future reference. Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from carton, handling, installing, and maintaining this product. Risk of electric shock: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Risk of Fire: Minimum 9 С supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. ASD assumes no responsibility for claims arising out of improper or careless Installation or handling of this product. WebSite: www.asd-lighting.com Fax: 339-52-897
INSTALLATION GUIDE IMPORTANT SAFETY INFORMATION: Please read all the instructions below before installation. Make sure that the supply voltage corresponds to the rated product voltage. The product must be installed by a qualified electrician in accordance with the National Electrical Code and corresponding local codes. If the product is damaged, do not use it. OPTIONAL ACCESSORIES Photocell PD Bracket Slip Fitter Bracket Yoke Mounting Bracket INSTALLATION STEPS SHORTING CAP / PHOTOCELL INSTALATION To install shorting cap (included) or photocell (sold separately), firmly place it onto the receptacle base located on the top of the luminaire unit and twist it clockwise until it locks into place. PHOTOCELL TWIST-LOCK 11-277V ORDERING INFORMATION: Model UPC Pcs in one GTIN 14 Carton JL-25C 8192121291 48 18192121298 PHOTOCELL TWIST-LOCK 18-528V HV ORDERING INFORMATION: Model UPC Pcs in one GTIN 14 Carton JL-27F 8192122144 48 18192122141 WebSite: www.asd-lighting.com Fax: 339-52-897
LED Shoe Box light SLIP FITTER BRACKET ASD-LSB3-SFM (SOLD SEPARATELY) INSTALLATION: 1. Loosen the big bracket mounting screw inside the SF bracket and connect the bracket to the fixture. 1. 2. 2. Pass AC wire through the SF bracket and tighten the big screw back into the bracket 3. Connect same colored wires (corresponding to wires N, L and G) together with wire nuts. 3. 4. 4. Place the bracket onto the pole and tighten the 4 screws. Adjusting SLIP FITTER MOUNTING BRACKET ORDERING INFORMATION: Model UPC 819212373 ASD-LSB3-SFM Pcs in one Carton GTIN 14 181921237 PD BRACKET ASD-LSB3-PDB (SOLD SEPARATELY) INSTALLATION: PD Bracket can be used with both round and square poles 1. 3. 1. Open the side lid of PD bracket, loosen big bracket mounting screw, connect bracket to the fixture and pass AC wire through. Silicon Plate 2. Connect same colored wires (corresponding to wires N, L and G) together with wire nuts. Put the connected wires into the junction box and close the side lid. 3. For square pole: attach the PD bracket to square pole with bolt, use silicon gasket. For round pole: attach the PD bracket to square pole with bolt, silicon gasket is not required. Close the side lid. E-mail: orders@asd-lighting.com WebSite: www.asd-lighting.com 2. PD BRACKET ORDERING INFORMATION: Model ASD-LSB3-PDB Phone: 781-739-3977 Fax: 339-52-897 UPC Pcs in one Carton GTIN 14 81921238 1 1819212387
YOKE MOUNTIG BRACKET ASD-LSB3-YMB (SOLD SEPARATELY) INSTALLATION: 1. Loosen bracket mounting screw, connect the bracket to the fixture and run the wires through the bracket. 2. Drill the hole in the wall as shown. 3. Connect same colored wires (corresponding to wires N, L and G) together with wire nuts. 4. Use the bolt to affix the fixture to the wall. 1. 3. 4. 2. 77 PD BRACKET ORDERING INFORMATION: Model UPC Pcs in one Carton GTIN 14 ASD-LSB3-YMB 819212397 1 1819212394 WebSite: www.asd-lighting.com Fax: 339-52-897
LED SHOE BOX LIGHT: ORDERING INFORMATION Model Watts CCT UPC Product Code WebSite: www.asd-lighting.com Fax: 339-52-897 Pcs in one Carton Carton Size Carton Weight ASD-LSB3P-1D5B-PRM 1 5, K 8192122991 27.52 1 23.3" x 15.15" x.29" 1.91 lbs ASD-LSB3P-15D5B-PRM 15 5, K 81921234 27.53 1 23.3" x 15.15" x.29" 11.7 lbs ASD-LSB3P-2D5B-PRM 2 5, K 819212311 27.54 1 29.72" x 15.15" x.29" 17.7 lbs ASD-LSB3P-3D5B-PRM 3 5, K 819212328 27.19 1 29.72" x 15.15" x.29" 19.27 lbs ASD-LSB3PHV-1D5B-PRM 1 5, K 819212335 27.111 1 23.3" x 15.15" x.29" 1.91 lbs ASD-LSB3PHV-15D5B-PRM 15 5, K 819212342 27.112 1 23.3" x 15.15" x.29" 11.7 lbs ASD-LSB3PHV-2D5B-PRM 2 5, K 819212359 27.17 1 29.72" x 15.15" x.29" 17.7 lbs ASD-LSB3PHV-3D5B-PRM 3 5, K 8192123 27.113 1 29.72" x 15.15" x.29" 19.27 lbs PHOTOCELL TWIST-LOCK 11-277V: Model Weight Dimensions Pcs in one Carton Carton Size Carton Weight JL-25C.4 lb (.2 kg) 3 5/1" x 2 5/8" 48 23.2" x 15.7" x.3" 23.8 lbs JL-25C 8192121291 18192121298 27.27 PHOTOCELL TWIST-LOCK 18-528V HV: Model Weight Dimensions Pcs in one Carton Carton Size Carton Weight JL-27F.4 lb (.2 kg) 3 5/1" x 2 5/8" 48 23.2" x 15.7" x.3" 23.8 lbs JL-27F 8192122144 18192122141 27.44 SLIP FITTER MOUNTING BRACKET: Model Materials Weight Dimensions Pcs in one Carton Carton Size Carton Weight ASD-LSB3-SFB Aluminum 2.73 lb (1.24 kg) 7 9/1" x 4 3/4" x 3 3/1" 15.7" x 7.59" x 7.48" 17.82 lbs ASD-LSB3-SFB 819212373 181921237 27.114 PD BRACKET: Model Materials Weight Dimensions Pcs in one Carton Carton Size Carton Weight ASD-LSB3-PDB Aluminum 1.3 lb (.74 kg) 7" x 3 1/1" x 3" 1 15.9" x 8.58" x 7.48" 21.5 lbs ASD-LSB3-PDB 81921238 1819212387 27.115 YOKE MOUNTING BRACKET: Model Materials Weight Dimensions Pcs in one Carton Carton Size Carton Weight ASD-LSB3-YMB Aluminum.99 lb (.45 kg) 1/4" x 4 5/8" x 3 1/1" 1 1.7" x 1" x 7.4" 14.3 lbs ASD-LSB3-YMB 819212397 1819212394 27.11 LENS (TYPE IV-M/TYPE V-M): Model Materials Weight Dimensions Pcs in one Carton Carton Size Carton Weight ASD-LSB3-L4M PC.2 lb (.12 kg) 11 1/2" x 5 5/1" x 3/8" 74 1.4" x 11.85" x 1.2" 22 lbs ASD-LSB3-L5M PC.2 lb (.12 kg) 11 1/2" x 5 5/1" x 3/8" 74 1.4" x 11.85" x 1.2" 22 lbs ASD-LSB3-L4M 8192123134 18192123131 27.117 ASD-LSB3-L5M 8192123141 18192123148 27.118