Kvalitet skydelære inklusiv DKD certifikat! 700,00 kr

- + M A H R L I G H T S Tilbud gældende indtil 31. december 2009 Kvalitet skydelære inklusiv DKD certifikat! 700,00 kr MarCal 16 EX med rund eller rektangulær dybdemål til vores tilbudspris 565,00 kr, og betal kun 135,00 kr for sporbart kalibrering certifikat! Gevindprøveværktøj med Certifikat Tlf. +45 3677 4000 www.herstad-piper.dk

- 2 MarCal. Digital Caliper 16 EX with Reference Lock Function DIN 862 565,00 Order no. 4102204 565,00 Order no. 4102201 NEW 840,00 Order no. 4102202 Functions: ON/OFF, RESET (Zero setting), mm/inch, Reference Lock/Unlock AUTO OFF/ON High contrast LCD with 8,5 mm high digits WebCode 2062-312 Measuring Resolution Depth rod Order no. Offer range mm (inch) mm / inch. 16 EX 150 (6 ) 0,01 /.0005 4102201 565,00 16 EX 150 (6 ) 0,01 /.0005 4102204 565,00 16 EX 200 (8 ) 0,01 /.0005 4102202 840,00 16 EX 300 (12 ) 0,01 /.0005 4102203 1200,00 AUTO-ON-Function 1. Measure 2. AUTO OFF (2 hours) 3. AUTO ON Advantages of the AUTO-ON function Through movement of the slide the caliper is ready to measure The reference to the zero point is not lost

+ 3 MarCal. Digital Caliper 16 EW waterproof, protection class IP67 IP67 668,00 Order no. 4102900 DIN 862 668,00 Order no. 4102911 1163,00 Order no. 4102902 Functions: ON/OFF, 0 (Zero setting), mm/inch, Reference Lock, Unlock Inductive waterproof measuring system FPS (Fluid Protected measuring System) Housing and operating buttons are made from Ultradur, which has an excellent chemical resistance High contrast LCD with 7,5 mm high digits WebCode 6345 Measuring Resolution Depth rod Order no. Offer range mm (inch) mm / inch 16 EW 150 (6 ) 0,01 /.0005 4102900 668,00 16 EW 150 (6 ) 0,01 /.0005 4102911 668,00 16 EW 200 (8 ) 0,01 /.0005 4102902 1163,00 16 EW 300 (12 ) 0,01 /.0005 4102906 1650,00 Reference-Lock-Function 1. First set to zero 2. Lock-Function is activated Advantages of the Reference Lock Function Zero position is secured Operating error is prevented Caliper is always ready for measurement

- 4 MarCal. Caliper 16 FN / 16 DN with scale reading DIN 862 147,00 Order no. 4100400 16 FN 184,00 Order no. 4100600 16 DN Vernier and main scale with satin-chrome finish for glare-free reading Slide and beam made of hardened stainless steel Raised guide ways to protect the scale Locking screw WebCode 2184 Measuring Resolution Error limit G Order no. Offer range upper lower mm (inch) inch mm mm 16 FN 150 (6 ) 1/128 0,05 0,05 4100400 147,00 16 DN 150 (6 ) 1/128 0,05 0,05 4100600 184,00 MarCal. Caliper 16 U with circular scale DIN 862 368,00 Order no. 4107107 SHOCK PROOF Large, high contrast dial face Satin chrome finished line scale Shockproof movement Covered rack WebCode 2491 Measuring Readings 1 Pointer Order no. Offer range revolution mm mm mm 16 U 150 0,02 2 4107107 368,00

+ 5 MarCal. Digital Depth Gage 30 EN RS232C 2340,00 Order no. 4126300 902/903 30 ENt Functions: ON/OFF, RESET (Zero setting), mm/inch. HOLD (storage of measuring values), PRESET (entering numerical value), TOL (tolerance display), DATA (Data transmission via connection cable) High contrast LCD with 6 mm high digits Capacitive measuring system with an energy saving function, life of the battery ca. 2 years Slide, beam and cross beam are made of hardened stainless steel Interchangeable anvil (M2,5) Measuring Resolution Error limit G Order no. Offer range mm (inch) mm / inch mm 30 EN 100 (4 ) 0,01 /.0005 0,02 4126300* 2340,00 * includes anvils 30 ENt, 902, 903 Micromar. Digital Micrometer 40 EW / 40 EX ABS from 900,00 Functions: 0 (Zero setting the display for Relative measurement), ABS (Switching from Relative to Absolute measurement), mm/inch, PRESET (enter a numerical value) Capacitive measuring system, life of battery approx. 2 years Measuring spindle and anvil are carbide tipped Rapid drive 40 EW Features are identical to 40 EX, in addition: PR (Reference Setting) Waterproof measuring system IP65 Operating buttons are made from Ultradur, which has an excellent chemical resistance 40 EW 40 EX IP65 WebCode 6214 Measuring range Resolution Error limit G Order no. Offer mm (inch) mm / inch µm 40 EW 0-25 (0-1 ) 0,001 /.00005 4 4151700 975,00 40 EX 0-25 (0-1 ) 0,001 /.00005 4 4150570 900,00 40 EX 25-50 (1-2 ) 0,001 /.00005 4 4150571 1163,00 40 EX 50-75 (2-3 ) 0,001 /.00005 5 4150572 1493,00 40 EX 75-100 (3-4 ) 0,001 /.00005 5 4150573 1875,00

- 6 Micromar. Self-Centering Inside Micrometer 44 A Self-centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120 Anvils from 12.5 mm are carbide tipped From 12.5 mm the anvils can be used to measure to the base of a bore hole From 40 mm all measuring heads are made from aluminum to from 2025,00 WebCode 6642 Measuring Readings Order no. Offer range mm mm 44 A 6-8 0,005 4190000 2025,00 44 A 8-10 0,005 4190001 2025,00 44 A 10-12,5 0,005 4190002 2040,00 44 A 12,5-16 0,005 4190003 2040,00 44 A 16-20 0,005 4190004 2078,00 44 A 20-25 0,005 4190005 2138,00 44 A 25-30 0,005 4190006 2175,00 44 A 30-35 0,005 4190007 2175,00 44 A 35-40 0,005 4190008 2288,00 44 A 40-50 0,005 4190009 2453,00 44 A 50-60 0,005 4190010 2813,00 44 A 60-70 0,005 4190011 2888,00 44 A 70-85 0,005 4190012 2978,00 44 A 85-100 0,005 4190013 3038,00 Micromar. Self-Centering Inside Micrometer Sets 44 AS from 5738,00 Supplied with: Case and ring gauge (includes a traceable calibration certificate for the ring gauges) WebCode 6652 Measuring Number Ring Order no. Offer range of gauges mm micrometers dia. mm 44 AS 6-12,5 3 8 / 10 4190050 5738,00 44 AS 12,5-25 3 16 / 20 4190051 5850,00 44 AS 25-50 4 30 / 40 4190052 9150,00 44 AS 50-100 4 60 / 85 4190053 11.625,00

+ 7 MarTest. Test Indicators 800 SHOCK PROOF Sealed, water proof dial face Anti magnetic Movement bearings are jewelled 439,00 499,00 Order no. 4305200 Order no. 4307200 800 S 800 SG 800 SGM 800 SL 800 SGE 627,00 728,00 885,00 Order no. 4308200 Order no. 4306200 Order no. 4308220 Design features of MarTest Test Indicators SHOCK PROOF Dial face is sealed with an O-Ring Mechanism Shockproof Anti magnetic Movement bearings are jewelled with 8 precious stones Automatic matching to sensing direction, thus ensuring error-free reading Double lever supported in ball bearings, overload protection provided by slip clutch Satin chrome finished housing Contact point with carbide ball WebCode 10863 Measuring Readings Dial dia. Length Order no. Offer range of styli mm mm mm mm 800 S ± 0,4 0,01 27,5 14,5 4305200 439,00 800 SG ± 0,4 0,01 38 14,5 4307200 499,00 800 SL ± 0,25 0,01 27,5 41,2 4306200 728,00 800 SGM ± 0,1 0,002 38 14,5 4308200 627,00 800 SGE ± 0,07 0,001 38 14,5 4308220 885,00

- 8 MarCator. Precision Dial Indicator 810 A DIN 878 222,00 Order no. 4311050 Precision gears and pinions Adjustable tolerance markers Chrome plated housing Delivered in plastic case WebCode 10934 Range Readings Dial Order no. Offer diameter mm mm mm 810 A 10 0,01 50 4311050 222,00 MarCator. Digital Indicators 1075 / 1081 IP51 Functions: ON/OFF, 0 (Set display to zero), mm/inch, Reversal of counting direction, PRESET (for entering a numerical value), DATA (data transmission with a data connection cable) Inductive measuring system, life of battery approx. 2 years High contrast Liquid Crystal Display with 8.5 / 10 mm high digits 668,00 Order no. 4336401 1440,00 Order no. 4336350 1081 1075 Measuring Resolution Span of error G* Order no. Offer range mm (inch) mm mm 1075 12,5 (.5 ) 0,01/.0005 0,025 4336401 668,00 1081 12,5 (.5 ) 0,001/.00005 0,005 4336350 1440,00 * in any zero point WebCode 10934

+ 9 MarCator. Digital Indicators 1086 / 1086 W ABS 0 TOL Functions: ON/OFF, RESET (Set display to zero), mm/inch, Reversal of the counting direction, PRESET (for entering a numerical value), TOL (Enter tolerance limit values), ABS (Display can be set to zero, without losing the reference to the Preset value), <0> (Tolerance GO / NO GO display mode), DATA (when connected with a data connection cable), Factor (adjustable) High contrast LCD with 11 mm high digits Inductive measuring system, battery life ca. 2000 hrs Tolerance indication...... with the displayed value.... without the value in the display. from 1538,00 1086 12,5 mm 0,001/.00005 1086 25 mm 0,01/.0005 1086 W 12,5 mm 0,01/.0005 1086 W 25 mm 0,001/.00005 WebCode 5457 Measuring Resolution Order no. Offer range mm (inch) mm/inch 1086 12,5 (.5 ) 0,001/.00005 4337020 1838,00 1086 12,5 (.5 ) 0,01/.0005 4337030 1538,00 1086 25 (1 ) 0,01/.0005 4337031 1950,00 1086 W 12,5 (.5 ) 0,001/.00005 4337040 2025,00 1086 W 25 (1 ) 0,001/.00005 4337041 2288,00 1086 W 12,5 (.5 ) 0,01/.0005 4337045 1725,00 1086 W 25 (1 ) 0,01/.0005 4337046 2175,00

- 10 Digimar. Height Measuring Instrument Digimar 817 CLM Quick Height D igimar 817 CLM Q uick Height. 350 / 600 / 1000 mm : The new Height Highly accurate rapid measurements, a wide range of measuring and Fast measurement...... per Hand with Quick-Mode (patented) from 31.988,00 Display Comfort to operate all measurement functions with the function keys 817 CLM - 1D 0-350 mm WebCode 12369-8298 817 CLM - 1D 0-600 mm 2D 2-D 0 TOL 817 CLM - 1D 0-1000 mm Data interface RS232 RS232 RS232 RS232 RS232 RS232 RS232C 1D 2D / Statistics Measuring range mm 0-350 0-600 0-1000 0-350 0-600 0-1000 Application range mm 520 770 1170 520 770 1170 Resolution mm 0,01 / 0,005 / 0,001 / 0,0005 / 0,0001 Measuring error µm 1,8+L/600 (L in mm) Quick Mode 1-D 1D Motorized measuring carriage Bore diameter Max-Min Tolerance monitoring Perpendicularity / Straightness measurement Angle calculation Statistics Measuring programs 40 40 40 40 40 40 Temperature compensation Air bearings Integrated USB memory USB printer interface * At 20 C in conjunction with a base plate in accordance to DIN 876/0 and a standard probe K6/51......

+ 11 Measuring Instrument Digimar 817 CLM with the innovative Quick Mode. evaluation possiblities and excellent operator comfort. Easy to operate...... all functions can be operated via the speed keys Measuring program...... for repetitive measurements / serial components Operating and display unit with back-lit display Perpendicularity...... and straightness measurements Dynamic measuring functions Determine MAX, MIN, MAX-MIN with just one measurement. Parallel deviation Roundness deviation Digimar. Probe Accessory Sets for 817 CLM /816 CL Probe Set 817 ts1 Shaft length Mount consists of: mm dia. mm 817 h2 Carrier for probes 100 S15/31,2 Disc probe 6 Z10/31,2 Cylindrical probe 6 MKe 30 Taper probe 6 TMT 120 Depth probe incl. carrier KM 2 Probe for M2 incl. probe 800 ts 6 817 h4 Carrier for probes 8 K4/30 Spherical probe 31 8 K6/40 Spherical probe 31 8 K10/60 Spherical probe 62 8 K10/100 Spherical probe 103 8 Carrying case from 4088,00 Probe Set 817 ts2 Shaft length Mount consists of: mm dia. mm 817 h2 Carrier for probes 100 S15/31,2 Disc probe 6 Z10/31,2 Cylindrical probe 6 MKe 30 Taper probe 6 TMT 120 Depth probe incl. carrier KM 2 Probe for M2 incl. probe 800 ts 6 Carrying case WebCode 12369-8298 817 ts1 Probe Set Order no. 817 ts1 4429019 6338,00 817 ts2 4429018 4088,00

12 Digimar. Height Measuring Instrument Digimar CX2 Digimar CX2 350 / 600 / 1000 mm: The low-d entry Height Measuring motorized measuring carriage. 1D 18.713,00 Order no. 5320104 RS232C 22.125,00 Order no. 5320102 CX2 0-350 mm WebCode 10846 CX2 0-600 mm Measuring range mm 0-350 0-600 0-1000 Application range mm 685 935 1335 Resolution mm 0,01 / 0,001 Measuring error* µm (5+L/300), L in mm 1-D Motorized measuring carriage Bore diameter Max-Min Tolerance monitoring Perpendicularity measurement 0 TOL 1D Measuring program 1 1 1 Air bearings, 3-point air cushion Data interface RS232 RS232 RS232 RS232C * At 20 C in conjunction with a base plate in accordance to DIN 876/0 and a standard probe K10/50...

+ 13 Instrument. Simple to operate and minimizes operator error due to the Measuring results...... are independent of the operator due to the motorized measuring carriage Easy to operate... 33.000,00 Order no. 5320103... all the most important functions can be operated via the speed keys Operating and display unit Measuring program...... for serial parts Dynamic measuring functions Parallel deviation CX2 0-1000 mm Roundness deviation

- 14 Millimess. Dial Comparator 1003 / 1010 SHOCK PROOF Shockproof movement Maximum sensitivity and accuracy are ensured by the jewelled movement and in conjunction with the precision gears and pinions Lockable fine adjustment screw Easy to read scale 743,00 Order no. 4332000 1020,00 Order no. 4334000 1010 1003 Shockproof Mechanism SHOCK PROOF 10 15 20 25 10 15 20 25 Measuring spindle within the measuring range When the measuring range is exceeded the movement will be mechanically decoupled (shown in red) WebCode 5202 Measuring Readings Order no. Offer range 1003 Millimess ± 50 µm 1 µm 4334000 1020,00 1010 Zentimess ± 0,25 mm 0,01 mm 4332000 743,00

+ 15 MarSurf. Mobile Roughness Measurement Device MarSurf PS1 incl. PS1 Explorer Software RS232C 13.125,00 Order no. 6910210 The set consists of: Drive unit with traversing lengths up to 17,5 mm Skidded probe with measuring range 350 µm, 2 µm/90 diamond stylus tip, measuring force 0,7 mn Height adjustment accessory, USB cable, carrying case, charger / mains adapter and much much more Multilingual PS1-Explorer PC Software - document results and saving profiles on a PC Special features Roughness standard integrated into casing Automatic cutoff selection (patented) so that even non-specialists are ensured correct measuring results. Dynamic calibration function with automatic value correction adjustment Calculation of 25 roughness parameters Large display Individual and short sampling lengths can be selected Phase-correct profile filter (Gaussian filter) as per DIN EN ISO 11562, special filter as per DIN EN ISO 13565-1, ls-filter as per DIN EN ISO3274 (can be disabled) µm / µnch switchable 14 languages can be selected USB interface is detected without a driver (such as a memory stick). Internal memory enables maximum 15 profiles or max. 20,000 results to be saved. Additional accessories are also available such as a printer, evaluation software, range of probes, adapter for transverse tracing, end face vee-block, measuring stand mount, etc. WebCode 10778 On-site surface roughness measurement,...... measuring during the production process Order no. 6910210 13.125,00 Universal use on processing machinery...... use on processing machinery or for incoming goods inspection

- + DIMENSIONAL METROLOGY Precision Gages Precimar. Precision Length Metrology MarSurf. Surface Metrology MarForm. Form Metrology MarGear. Gear Metrology MarVision. Optical Metrology MarShaft. Shaft Metrology Services WWW.MAHR.COM Mahr GmbH Esslingen Reutlinger Straße 48, 73728 Esslingen Tel.: +49 711 9312-600, Fax: +49 711 9312-725 mahr.es@mahr.com, www.mahr.com by Mahr GmbH, Esslingen We reserve the right to make changes to our products, especially due to technical improvements and further developments. All illustrations and technical data are therefore without guarantee. 375xxxx-23.07.2009