SIMATIC Digital Input Module Product information 1 SIMATIC Digital Input Module Product Information This documentation is part of the documentation package with the order number: S7-300 Automation System: 6ES7398-8FA10-8BA0 06/2007 A5E01062667-02
Safety Guidelines Safety Guidelines This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. WARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken. CAUTION without a safety alert symbol, indicates that property damage can result if proper precautions are not taken. NOTICE Qualified Personnel Prescribed Usage Trademarks indicates that an unintended result or situation can occur if the corresponding information is not taken into account. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. The device/system may only be set up and used in conjunction with this documentation. Commissioning and operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes in this documentation qualified persons are defined as persons who are authorized to commission, ground and label devices, systems and circuits in accordance with established safety practices and standards. Note the following: Disclaimer of Liability WARNING This device may only be used for the applications described in the catalog or the technical description and only in connection with devices or components from other manufacturers which have been approved or recommended by Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and assembly as well as careful operation and maintenance. All names identified by are registered trademarks of the Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions. Siemens AG Automation and Drives Postfach 48 48 90437 NÜRNBERG GERMANY Ordernumber: A5E01062667-02 P 06/2007 Copyright Siemens AG 2007. Technical data subject to change
Table of contents 1 Product information... 5 1.1 Digital Input module SM 321 DI 64 x DC 24 V, Sinking/Sourcing...5 1.2 Dimension Drawing for the 64 Point I/O...13 1.3 64 Point Terminal Block...13 Index... 15 Product Information, 06/2007, A5E01062667-02 3
Table of contents 4 Product Information, 06/2007, A5E01062667-02
1 New Digital Input Module Available The S7-300 Digital Input Module SM 321 64DI, DC24V, Sinking/Sourcing has been added to the S7-300 family. The order number for this module is 6ES7 321-1BP00-0AA0. This product information includes details about the characteristics and technical specifications of the Digital Input Module SM 321 64DI, DC24V, Sinking/Sourcing. Refer to the SIMATIC S7-300 Automation System Module Data Reference Manual for more information about the S7-300 product family. Additional Assistance For assistance in answering technical questions, for training on this product, or for ordering, contact your Siemens distributor or sales office. 1.1 Digital Input module SM 321 DI 64 x DC 24 V, Sinking/Sourcing Order number: 6ES7 321-1BP00-0AA0 Properties The Digital Input Module SM 321 64DI, DC24V, Sinking/Sourcing has the following characteristic features: 64 inputs, isolated in 4 groups of 16 Rated input voltage 24 VDC The SM 321 64DI, DC24V, Sinking/Sourcing uses the following cables and terminal blocks: 6ES7 392-4BB00-0AA0 (1.0m connection cable) 6ES7 392-4BC50-0AA0 (2.5m connector cable) 6ES7 392-4BF00-0AA0 (5.0m connector cable) 6ES7 392-1AN00-0AA0 (terminal block 40 pts; screw connect) 6ES7 392-1BN00-0AA0 (terminal block 40 pts; clamp connect) Product Information, 06/2007, A5E01062667-02 5
1.1 Digital Input module SM 321 DI 64 x DC 24 V, Sinking/Sourcing STEP 7 Integration (for use with S7-300 CPU and ET 200M) The 64 Point I/O Modules are integrated with the HSP 2019 V1.0. The HSP is included in STEP 7 V5.4 SP2 and can be installed from STEP 7 V5.4 and above. GSD: The 64 Point I/O Modules are supported by the following versions of ET 200M. Use the following link to download the corresponding GSD/GSDML files: http://support.automation.siemens.com/ For PROFIBUS GSD files search for ID # 113498 For PROFINET GSDML files search for ID # 25057900 PROFIBUS: IM153-1AA03-0XB0 (from product release E12), with GSD-file SI01801D.*, Version V1.5 IM153-2BA02-0XB0 (from product release E01), with GSD-file SI04801E.*, Version V1.0 PROFINET: IM153-4AA00-0XB0 with GSDML file Version V2.1 The SM 321 64DI Digital Input Module can be used with all available CPUs if its configuration is defined within a STEP 7 project. Default startup is not supported. The module can be used with the CPUs listed in the following tables. C-CPUs (Compact CPUs) CPU312C CPU313C CPU313C-2 DP CPU313C-2 PtP CPU314C-2 DP CPU314C-2 PtP Order Number 6ES7 312-5BD0x-0AB0 6ES7 312-5BE03-0AB0 6ES7 313-5BE0x-0AB0 6ES7 313-5BF03-0AB0 6ES7 313-6CE0x-0AB0 6ES7 313-6CF03-0AB0 6ES7 313-6BE0x-0AB0 6ES7 313-6BF03-0AB0 6ES7 314-6CF0x-0AB0 6ES7 314-6CG03-0AB0 6ES7 314-6BF0x--0AB0 6ES7 314-6BG03--0AB0 M-CPUs CPU312 CPU314 CPU315-2 DP CPU316-2 DP CPU317-2 DP CPU315-2 PN/DP CPU317-2 PN/DP CPU319-3 PN/DP Order Number 6ES7 312-1AD1x-0AB0 6ES7 312-1AE13-0AB0 6ES7 314-1AF1x-0AB0 6ES7 314-1AG13-0AB0 6ES7 315-2AF0x-0AB0 6ES7 315-2AG10-0AB0 6ES7 316-2AG00-0AB0 6ES7 317-2AJ10-0AB0 6ES7 315-2EG10-0AB0 6ES7 315-2EH13-0AB0 6ES7 317-2EJ10-0AB0 6ES7 317-2EK13-0AB0 6ES7 318-3EL00-0AB0 6 Product Information, 06/2007, A5E01062667-02
1.1 Digital Input module SM 321 DI 64 x DC 24 V, Sinking/Sourcing F-CPUs CPU315F-2 DP CPU317F-2 DP CPU315F-2 PN/DP CPU317F-2 PN/DP CPU319F-3 PN/DP Order Number 6ES7 315-6FF0x-0AB0 6ES7 317-6FF0x-0AB0 6ES7 315-2FH1x-0AB0 6ES7 317-2FJ10-0AB0 6ES7 317-2FK13-0AB0 6ES7 318-3FL00-0AB0 C7-CPUs Order Number C7-613 6ES7 613-1CA01-0AE3 C7-635 Touch 6ES7 635-2EB01-0AE3 C7-635 Key 6ES7 635-2EC01-0AE3 C7-636 Touch 6ES7 636-2EB00-0AE3 C7-636 Key 6ES7 636-2EC00-0AE3 WARNING This module must be configured in a STEP 7 project in order to specify the correct assignment of addresses and input/output points. Use of this module without this configuration could cause unexpected machine or process operation to occur. Unexpected machine or process operation may cause death, serious injury and/or property damage. The notice label must be removed before using the module. Product Information, 06/2007, A5E01062667-02 7
1.1 Digital Input module SM 321 DI 64 x DC 24 V, Sinking/Sourcing Wiring and block diagram for the SM 321; DI 64 x DC 24 V Figure 1-1 Wiring diagram SM 321 64 DI, sinking/sourcing 1 2 3 4 5 Channel number Status display green Backplane bus interface Connection for sinking mode Connection for sourcing mode 8 Product Information, 06/2007, A5E01062667-02
1.1 Digital Input module SM 321 DI 64 x DC 24 V, Sinking/Sourcing Terminal assignment for the SM 321; DI 64 x DC 24 V The following figure shows the terminal assignment of the channels to the connector. Figure 1-2 Terminal assignment SM 321 64 DI, sinking/sourcing Connector Assignment for the SM 321; DI 64 x DC 24 V The following figure shows the connectors of the S7-300 64 point I/O terminal block. Figure 1-3 64 Point Terminal Block Connector Product Information, 06/2007, A5E01062667-02 9
1.1 Digital Input module SM 321 DI 64 x DC 24 V, Sinking/Sourcing The following table shows the terminal assignments of the channels to the connector for the SM321; DI 64 X DC 24 V Sinking/Sourcing module. Connector Pin Function Connector Pin Function 1 I x.0 2 I x+2.0 3 I x.1 4 I x+2.1 5 I x.2 6 I x+2.2 7 I x.3 8 I x+2.3 9 I x.4 10 I x+2.4 11 I x.5 12 I x+2.5 13 I x.6 14 I x+2.6 15 I x.7 16 I x+2.7 17 COM 0 18 COM 1 19 I x+1.0 20 I x+3.0 21 I x+1.1 22 I x+3.1 23 I x+1.2 24 I x+3.2 25 I x+1.3 26 I x+3.3 27 I x+1.4 28 I x+3.4 29 I x+1.5 30 I x+3.5 31 I x+1.6 32 I x+3.6 33 I x+1.7 34 I x+3.7 35 COM 0 36 COM 1 37 N.C. 38 N.C. 39 N.C. 40 N.C. In the table above, note that both COM x pins of a group must be connected. Technical Data for the SM 321; DI 64 x DC 24 V Technical Data Dimensions and Weight Dimensions W x H x D (mm) 40 x 125 x 112 (including protective covering)* Weight Approx. 230 g Module-specific data Isochronous mode supported No Supports clocked operation No Number of inputs 64 Length of cable Unshielded max. 600 m Shielded max. 1000 m Front Connector Two 40-Pin Connectors 10 Product Information, 06/2007, A5E01062667-02
1.1 Digital Input module SM 321 DI 64 x DC 24 V, Sinking/Sourcing Technical Data Voltages, Currents, Potentials Number of inputs that can be triggered simultaneously Horizontal configuration Up to 40 C 64 Up to 60 C 32 (derate at 50% per group) Vertical configuration Up to 40 C 32 (derate at 50% per group) Electrical Isolation between channels and the backplane Yes between channels, in groups of Yes, 16 Permissible potential difference between different circuits DC 75 V / AC 60 V Isolation test voltage DC 500 V Current consumption from the backplane bus max. <100 ma Power loss of the module typ. 7 W Status, interrupts, diagnostics Status display Green LED per channel Interrupts None Diagnostic functions None Transducer selection data Input voltage Rated value DC 24 V for "1" signal -13 to -30 V, 13 to 30 V for "0" signal - 5 to + 5 V Input current with "1" signal typ. 4.2 ma Input delay At "0" to "1" 1.2 to 4.8 ms At "1" to "0" 1.2 to 4.8 ms Input characteristics to IEC 61131, Typ 1 Connection of 2-wire BEROs Not supported Input type Sink/source input *Necessary for unused connectors. Product Information, 06/2007, A5E01062667-02 11
1.1 Digital Input module SM 321 DI 64 x DC 24 V, Sinking/Sourcing Wiring Components Your S7-300 SM 321 64DI, DC24V, Sinking/Sourcing uses two terminal blocks to connect actuators and sensors to the front connectors of the module. Module connections are made using a connecting cable (round-sheath ribbon cable). The configuration consists of the following components: Module with two front connectors Two high-density I/O terminal blocks for mounting on DIN-rail. Connecting cables (See the following table for order numbers) The following table shows the cables and terminal blocks used with the SM321 64 DI module. Order Number Description Weight Contents 6ES7 392-4BB00-0AA0 1.0 m Connector Cable for 64pts 150 Grams 2 Modules 6ES7 392-4BC50-0AA0 2.5 m Connector Cable for 64pts 350 Grams 2 Modules 6ES7 392-4BF00-0AA0 5.0 m Connector Cable for 64pts 650 Grams 2 Modules 6ES7 392-1AN00-0AA0 Terminal Block 40 pts. Screw Connect 120 Grams 2 6ES7 392-1BN00-0AA0 Terminal Block 40 pts. Clamp Connect 120 Grams 2 12 Product Information, 06/2007, A5E01062667-02
1.2 Dimension Drawing for the 64 Point I/O 1.2 Dimension Drawing for the 64 Point I/O The following figure shows the dimension drawing of the SM 321 (64DI) and SM 322 (64DO) I/O Modules. Figure 1-4 Dimensions for SM 321 (64DI) and SM 322 (64DO) I/O Modules 1.3 64 Point Terminal Block The following figure shows the dimension drawing of the SIMATIC 64 Point Terminal Block. 120 48 46 Figure 1-5 Dimensions for the SIMATIC 64 Point Terminal Block Product Information, 06/2007, A5E01062667-02 13
1.3 64 Point Terminal Block 14 Product Information, 06/2007, A5E01062667-02
Index D Digital input module SM 321, DI 64 x DC 24 V, 5 S SM 321, DI 64 x DC 24 V Technical Data, 10 Wiring diagram, 8, 12 Product Information, 06/2007, A5E01062667-02 15
Index 16 Product Information, 06/2007, A5E01062667-02