User s Manual (Model A) isappos 9/12 Stand
Section 1 Overview The Jacket (unit: mm) Package Contents Aluminum base plate Aluminum Stand body Jacket for ipad 1 x Micro-USB cable (For charging and data syncing) 2 x Screws for the Stand jacket 2 x thumb screws for the Stand base plate 2 x coin screws for the rear cover Quick user guide 1. ipad not included. 2. Power adapter not included for model A. Use included micro-usb cable with ipad s 10W (12W for 12.9 ipad Pro) adapter for charging. 1 2 9.7 12.9 1
The Stand I/O Ports (unit: mm) 9.7 Micro-USB (for charging and data syncing) 12.9 2
Section 2 Getting started 2. Connect the power adapter for charging. Getting started Assemble ipad and the Stand Tools needed - Phillips(+) #0 Screwdriver Assemble the stand 1. Secure the base plate and Stand body with M4 thumb screws (x4) found in the accessory box. 3. Place the back cover to the back of the stand. Secure the back cover the base plate using the coin screws (x2) found in the accessory box. Tighten them with a coin. 3
4. Insert the ipad to the jacket Slide open the jacket Remove the paddings of the indicated screw holes. Secure the ipad and the jacket with Phillips(+) #0 Screwdriver and M2 screws (x2) found in the accessory box. Place the paddings to cover the indicated screw holes. Insert and align ipad with the jacket (It s normal to see the side with the home bottom is higher than the other side) 5. Place the jacket onto the Stand s dock. (make sure the lock-unlock switch is in the unlock position) Slide close the jacket gently and slowly. While sliding close the jacket, press down both corners of the ipad like indicated in the picture and make sure it s aligned with the jacket. 4
Unlock Jacket from the Stand Manually If the jacket is placed on the Stand while the Lock-Unlock slider on the cradle is in Lock position, you can manually override the switch and unlock the jacket from the Stand by using a paperclip and push up the button hidden at the bottom of the cradle. Lift up the jacket while the button is pushed up to detach it from the Stand. Product Warranty Registration Register your Stand for warranty by visiting our customer portal. Simply sign up for an account and enter your Stand s serial number to complete the warranty registration process. Override mechanism to unlock When locked 5
Section 3 Regulatory Information Regulatory Information Caution: Do not remove the plug and connect it to a power outlet by itself; always attach the plug to the power adapter first before connecting it to a power outlet. Safety Caution Note: To comply with IEC60950-1 Clause 2.5 (limited power sources, L.P.S) related legislation, peripherals shall be 4.7.3.2 Materials for re enclosure compliant. 4.7.3.2 Materials for re enclosures For MOVABLE EQUIPMENT having a total mass not exceeding 18kg.the material of a FIRE ENCLOSURE, in the thinnest significant wall thickness used, shall be of V-1 CLASS MATERIAL or shall pass the test of Clause A.2. For MOVABLE EQUIPMENT having a total mass exceeding 18kg and for all STATIONARY EQUIPMENT, the material of a FIRE ENCLOSURE, in the thinnest significant wall thickness used, shall be of 5VB CLASS MATERIAL or shall pass the test of Clause A.1 CE MARK This device complies with the requirements of the EEC directive 2004/108/EC with regard to Electromagnetic compatibility and 2006/95/EC Low Voltage Directive. FCC This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. 6
LEGISLATION AND WEEE SYMBOL 2012/19/EU Waste Electrical and Electronic Equipment Directive on the treatment, collection, recycling and disposal of electric and electronic devices and their components. The crossed dust bin symbol on the device means that it should not be disposed of with other household wastes at the end of its working life. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government of CE, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Safety Instructions Please adhere to the following safety guidelines to help ensure your own personal safety and protect your system from potential damage. Any acts taken that are inconsistent with ordinary use of the product, including improper testing, etc., and those not expressly approved by isappos may result in the loss of product warranty. Unless expressly approved by an authorized representative of isappos in writing, you may not and may not permit others to: Disassemble or reverse engineer the device or attempt to derive source code (underlying ideas, algorithms, or structure) from the device or from any other information provided by isap- POS, except to the extent that this restriction is expressly prohibited by local law. Modify or alter the device. Remove from the device any product identification or other notices, including copyright notices and patent markings, if any. To reduce the risk of bodily injury, electrical shock, fire, and damage to the device and other equipment, observe the following precautions: Power Sources Observe and follow service markings. Do not push any objects into the openings of your device unless consistent with the authorized operation of the device. Doing so can cause a re or an electrical shock by shorting out interior components. 7
The powering of this device must adhere to the power specifications indicated for this product. Do not overload wall outlets and/or extension cords as this will increase the risk of re or electrical shock. Do not rest anything on the power cord or on the device (unless the device is made and expressly approved as suitable for stacking). Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped over. Be sure that nothing rests on any cables. Operate the device only from the type of external power source indicated on the electrical ratings label. To help avoid damaging your device, be sure the voltage selection switch (if provided) on the power supply is set to match the power available at your location. Also be sure that attached devices are electrically rated to operate with the power available in your location. Use only approved power cable(s). If you have not been provided a power cable for your device or for any AC -powered option intended for your device, purchase a power cable that is approved for use in your country and is suitable for use with your device. The power cable must be rated for the device and for the voltage and current marked on the device's electrical ratings label. The voltage and current rating of the cable should be greater than the ratings marked on the device. To help prevent an electrical shock, plug the device and peripheral power cables into properly grounded electrical outlets. These cables are equipped with three-prong plugs to help ensure proper grounding. Do not use adapter plugs or remove the grounding prong from a cable. If you must use an extension cable, use a 3- wire cable with properly grounded plugs. Observe extension cable and power strip ratings. Ensure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip. To help protect your device from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS). Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modi cations. Always follow your local/national wiring rules. When connecting or disconnecting power to hot-pluggable power supplies, if offered with your device, observe the following guidelines. 8
Install the power supply before connecting the power cable to the power supply. Unplug the power cable before removing the power supply. If the system has multiple sources of power, disconnect power from the device by unplugging all power cables from the power supplies. Servicing/Disassembling Do not service any product except as expressly set forth in your system documentation. Opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose you to an electrical shock. Only a trained service technician should service components inside these compartments. To reduce the risk of electrical shock, never disassemble this device. None of its internal parts are userreplaceable; therefore, there is no reason to access the interior. Do not spill food or liquids on your system components, and never operate the device in a wet environment. If the device gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider. Use the device only with approved equipment. Move products with care; ensure that all casters and/or stabilizers are firmly connected to the system. Avoid sudden stops and uneven surfaces. Environment Do not use this device near water (e.g. near a bathtub, sink, laundry tub, in a wet basement or near a swimming pool). Do not use this device in areas with high humidity. This device must not be subjected to water or condensation. Keep your device away from radiators and heat sources. Also, do not block cooling vents. Cleaning Always unplug the power before cleaning this device. Do not use liquid or aerosol cleaners of any kind. Use only compressed air that is recommended for electronic devices. Use a dry cloth for cleaning. Protecting Against Electrostatic Discharge Static electricity can harm delicate components inside your system. To prevent static damage, discharge static electricity from your body before you touch any of the electronic components, such as the microprocessor. You can do so by periodically touching an unpainted metal surface on the chassis. You can also take the following steps to help prevent damage from electrostatic discharge (ESD): 9
1. When unpacking a static-sensitive component from its shipping carton, do not remove the component from the antistatic packing material until you are ready to install the component in your system. Just before unwrapping the antistatic packaging, be sure to discharge static electricity from your body. 2. When transporting a sensitive component, first place it in an antistatic container or packaging. 3. Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads, workbench pads, and an antistatic grounding strap. isappos COPYRIGHT 2017. ALL RIGHTS RESERVED. Apple iphone and ipad are registered trademarks of Apple, Inc. and are not included. They serve as a reference only and does not imply any affiliation with or endorsement by Apple. UM000A0EN0802171 10