Stat Crew to Nevco Stats Panel Interface Includes: Wireless System: Statcrew Wireless Interface and custom MPCX Receiver or Wired System: Statcrew Wired Interface Wireless Power requirements: (2) 9 VDC Power Adapter (included) Wired Power requirements: (1) 9 VDC Power Adapter (included Size: Approximately 5 x 3 x 2 Approximate weight: 5.57oz. 135-0226 10/21/2016
Thank You Congratulations on purchasing The Nevco StatCrew Interface. Since 1934 we have been serving sports venues around the world. We appreciate your business and are always glad to hear comments and suggestions from our customers don t hesitate to call or email us at any time! The StatCrew Interface connects compatible NEVCO scoreboards to computers using StatCrew software. It allows selected information to be posted to the scoreboard. Serial Communications setup examples are provided as a starting point. Please contact your software provider for specific details. Figures 1 and 2 below show the parts and connections for the StatCrew Interface. Serial Number BNC Connector LED Status Indicator Power Connection (9 VDC) RS232 Serial Port Figure 1 -- StatCrew Interface Power Plug Transformer Figure 2 -- Power Supply (9VDC) (typical) 135-0226 Page 1 10/21/2016
Scoreboard Compatibility StatCrew Software Nevco Model SD7-5-NL, (RL and EC) SD7-9-NL, (RL and EC) PTF-NL, (RL and EC) Writing Data to the Scoreboard (StatCrew Wireless Interface) Wireless Transmitter RS 232 StatCrew Wireless Interface Up to 1000 ft. Clear Line of Sight Wireless Receiver MPCX Receiver NEVCO SCOREBOARD Coax Coax StatCrew PC NEVCO MPC Control NOTE: Consult the scoreboard installation manual for proper coax hookup. Diagram 2 Diagram 2 shows the scoreboard being used to display data from a Statcrew PC or operated normally with a NEVCO MPC Control. They are communicating wirelessly by means of a StatCrew Wireless Interface. Wireless For wireless communication between the PC and the scoreboard, (diagram 2) the StatCrew Wireless system can be used. The wireless devices are married together at the factory so they will communicate exclusively with each other. The StatCrew Wireless Interface has the same connections and uses the same power supply as the StatCrew Wired Interface. (Refer to Figures 1 and 2). Inputs and outputs on the StatCrew Interface are dynamic and auto-sensing on a first-come first-serve basis. Please be sure to disconnect the computer input prior to using the MPC Coax input, and vice-versa. 135-0226 Page 2 10/21/2016
NOTE: The Statcrew Wireless signal is NOT compatible with the MPCW-5 Receiver, the MPCW-6 Receiver, or the MPCHA Receiver. Writing Data to a Wired Scoreboard (StatCrew Wired Interface) Coax RS 232 StatCrew Wired Interface Wall Jack NEVCO SCOREBOARD StatCrew PC NOTE: Consult the scoreboard installation manual for proper coax hookup. Diagram 1 Diagram 1 shows the scoreboard being used to display data from a Statcrew PC. (Connect the Statcrew PC Interface to the wall jack). Configuration of StatCrew Software The stat crew software will need to be configured to output the required xml document. These settings will be located in the main StatCrew program. To allow the on-court players' stats to be displayed on the scoreboard, set the following options in the DOS scoring program: 1) Remote Display Terminal Type -- set to Scoreboard. 2) Options Full subs -- enter Y to enable full substitutions entry. 135-0226 Page 3 10/21/2016
While scoring the match make sure to manage substitutions using: 1) Game control Subs -- enter uniform numbers for players coming in and going out 2) Game control On court -- reset players on court (if needed). Theses settings can be found in the game reports section of the program. Perform the steps on the following pages to direct the statcrew output file so that the nevco software can read it. The location is recommended to not be the program directory C:\STATCREW due to file conflicts and as such will be rejected by the Nevco stat panel software. No directory name and the file name should be longer 8 characters. Enter the xml file name keeping in mind it needs to be fewer than 8 characters. 135-0226 Page 4 10/21/2016
In the Stat Crew software group, select Game Reports Program opens and displays where you store your game data. 135-0226 Page 1 10/21/2016
Click Games List and select your game. Click OK. 135-0226 Page 2 10/21/2016
Select Live from the menu. A new window will open. 135-0226 Page 3 10/21/2016
Set these parameters in the Live Stats settings window as you see below. Your xml gameid and storage directory are names created by the customer. Be sure the target directory exists on your local hard drive. Click OK. 8 alphanumeric characters or less Previously selected Game ID name And your target directory 135-0226 Page 4 10/21/2016
Nevco StatCrew StatPanel Controller (our magic decoder) Double-click this icon to display Stat Panel Controller window. Change the file used to supply data to the Stat Panel. Change the destination of the complimentary copy of the StatCrew XML for use by other software packages. Change the serial port used for sending / receiving live data. Toggle the brightness of the display between bright and dim. Change the time-outs-left. This file can also be located on another computer. Networking issues are NOT the responsibility of the Nevco service department. We want to help, but there is only so much you can do over the phone without the support of the school s IT department. If you cannot change the brightness or add timeouts, please follow the steps on the next page to determine which COM port you should use. 135-0226 Page 5 10/21/2016
Familiarize yourself with Windows Device Manager. And here too is a HOME FREE feature just to make it easy: Click the Start Orb. Select Control Panel. (You may need to adjust your VIEW options.) Then, select Device Manager. You should see below, I have TWO com ports installed. 135-0226 Page 6 10/21/2016
Changing Time Outs Left (T.O.L.) The StatCrew software does not track TOL or give an interface to the user to change TOL, but the larger Nevco stat panels have the TOL feature included on them. In order to set and change the TOL on the stat panels, the user must interface using the Nevco software as seen in page 5. Using the XML file for other programs If you need to use StatCrew data for third-party applications, you ll want to use the StatCrew StatPanel software to copy the StatCrew file to a separate folder. This ensures that there are no conflicts between StatCrew software and other third-party software. To use the StatCrew StatPanel software to create a file for third-party software, follow these steps: 1. Open the StatCrew StatPanel Controller software. 2. Change the Input Path to the XML file generated by the StatCrew software. 3. Change the Output Path to the folder where you would like the third-party software to look for the file. This folder cannot be the StatCrew folder or the same folder as the Input Path. 4. Set your third-party software to look for the file generated in the output path. The file will have the same name as the file in the Input Path. 135-0226 Page 7 10/21/2016
Problem Cause Solution Scoreboard will not turn ON - or - Shows incorrect data Results output is not turned ON in the StatCrew software No power to scoreboard Bad coax or connector No power to a StatCrew Interface Wrong type of serial cable Scoreboard not getting good data Scoreboard problem Nevco PC software not installed on PC Consult the StatCrew users manual on scoreboard output Connect an MPC control to the coax port on the StatCrew wireless transmitter or directly to the scoreboard coax input to confirm the scoreboard is working properly. Check all breakers and fuses Check all cables and connections Check for power Straight thru cable at computer. Check all codes and model numbers Consult trouble shooting guide that came with the scoreboard Verify model code and/or script file Scoreboard will not turn off The StatCrew Interface is still sending a signal Turn off power to the Statcrew Interface at the control point If the problem persists please contact the Nevco Service Department. 800-851-4040 135-0226 Page 8 10/21/2016
Features Small: The Data Translation Box takes up little space. Easy to setup: No switches or jumpers to set. Automatically detects input source. NOTE: The StatCrew Wireless Interface signal is NOT compatible with the MPCW-5 Receiver, the MPCW-6 Receiver, or the MPCHA Receiver. Parts List Power Supply Coax Cable Serial Cable Serial Converter Wireless System: StatCrew Wireless Interface StatCrew Receiver Wired System: StatCrew Wired Interface This Manual Specifications Size: Approximately 5 x 3 x 2 Weight: Approximately 5.57 oz. Power requirements: 9 VDC Power adapter Operating distance: StatCrew Wireless Interface Coax: 1000 ft. with (two loads max) RS-232 150 ft. Wireless: 1000 feet (clear line of sight) Operating temperature: 0 F to 150 F Certifications: FCC part 15 Class B CE RoHS NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. The user is cautioned that changes and modifications made to the equipment without the approval of Nevco could void the user s authority to operate this equipment. This class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations. Cet appareil numerique de la classe B repecte toutes les exigences du Reglement sure le materiel brouller du Canada. WARNING: To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter. 135-0226 Page 9 10/21/2016
NEVCO GUARANTEE To view or receive the most recent copy of the Guarantee, please visit our website, www.nevco.com or call 1-618-664-0360 NEVCO, Inc. 301 East Harris Avenue Greenville, IL 62246-2151 USA USA TOLL-FREE 800-851-4040 CANADA TOLL-FREE 800-461-8550 International Telephone: +1-618-664-0360 Website: www.nevco.com Email: info@nevco.com