PMX6BU Wireless DJ Sound FX Audio Mixer Wireless BT Streaming Stage & Studio Mixer System with Karaoke Style Mic-Talkover, MP3/USB/SD Readers, FM Radio
PMX6BU Wireless DJ Sound FX Audio Mixer Wireless BT Streaming Stage & Studio Mixer System with Karaoke Style Mic-Talkover, MP3/USB/SD Readers, FM Radio System Pairing - Connection Setup: 1. Be sure that the DJ Sound FX Audio Mixer POWER switch is set to OFF position. 2. Turn each channel LEVEL and MASTER volume controls to 0 position. 3. Next, turn ON the unit and receiver. Ensure both units are fully charged (if the battery LED indicator is red, then it requires charging). 4. Use an Aux (3.5mm) audio cable to connect the wireless audio receiver's into a compatible speaker audio input jack -- and ensure if the 'Aux' mode on the connected speaker is activated. 5. Pair your wireless receiver with the audio mixer. *See the included 'Quick Start Guide': a. Press the POWER button on the wireless receiver (the EMIT indicator light will blink). b. While the EMIT indicator is blinking, press the 5.8G/BT button (the RXD indicator light will remain solid). c. While the RXD indicator light remains solid, press and hold the 5.8G/BT button for ~ 5 seconds (or until the RXD indicator blinks red). d. While the RXD indicator light blinks red, hit the switch and power ON the mixer unit. e. Press the Lock Code button on the rear of the mixer unit. Then press and hold the Match Code button for about ~5 seconds or until the Work LED indicator blinks. The system is pairing while the RXD indicator on the receiver blinks -- and the Work LED indicator on the mixer blinks. Wait until the Work LED indicator on the mixer remains solid to proceed to the next step. f. While the Work LED indicator light on the mixer remains solid, press the Lock Code button to secure the wireless pairing connection (if a successful wireless pairing connection is made, the RXD indicator on the receiver will stop blinking red). g. Stream some sound! You can now connect the wireless receiver to a compatible speaker system via Aux-Input connection cable. 2
6. Adjust and set the volume control levels accordingly. Begin playing audio through channel 1 while slowly adjusting the LEVEL control to the desired setting. Proceed to adjust the settings accordingly for each audio channel in use. Limitless Speaker Connection + N 1 12 3 N N+1 5.8GHz receiver 3
Mixer Parts and their Function 1 12 43 29 13 14 15 16 17 18 19 20 30 31 32 2 3 4 21 33 41 5 22 34 6 23 42 7 24 8 25 9 26 27 35 37 38 10 28 36 39 11 40 1. Channel -1 USB/SD Input Jacks USB/SD input jack: Supports WAV/MP3 format. 16G flash drive compatible 2. 6.35mm Microphone input jack 3. DJ Set: Press this button to play music and the color will change from red to blue. Play using DJ performance effect and adjust USB1/DJ sound volume 4. USB1/DJ volume: Control channel-1 with 10 DJ effect volume 5. KEY CHANGE: Press this button will let your music modified tone 6. Reverb: Make music reverberant 7. Delay: Make music slowly down 8. Voice Chanc: Crop vocal music 4
9. Channel -1 USB/SD previous music for USB/SD mode and last channel for FM mode 10. Channel -1 USB/SD choose input signal 11. Repeat Channel -1 USB/SD song 12. Phone/Pad stand 13. 6.35mm Guitar Input jack 14. Microphone Volume knob 15. Guitar Volume knob 16. Microphone Delay Effect knob 17. Microphone Echo Effect knob 18. Music bass Volume knob 19. Music Treble Volume knob 20. Master Volume Control 21. Flange Effect 22. Filter Effect 23. WAH Voice Effect 24. Scratch-1 Effect 25. Scratch-2 Effect 26. Channel -1 USB/SD: Play/Stop on Mp3 mode, scan FM CH on FM mode 27. Channel -1 USB/SD Next Music for USB/SD mode, next channel for FM mode 28. Microphone Priority: Mute the music and adjust microphone volume 29. Channel -2 USB/SD 30. 3.5MM AUX/PHONE out 31. 3.5MM AUX input-1 32. 3.5MM AUX input-2 33. CLUB effect 34. Drum Effect: Press for more than 4 sec. and the number 1 to 10 will change into blue color and use 10 types of drum effect 35. Channel -2 USB/SD Last music for USB/SD mode, last CH for FM mode 36. Channel -2 USB/SD Input Signal select 37. Channel -2 USB/SD: Play/Stop on Mp3 mode: Scan FM CH on FM mode 38. Channel -2 USB/SD Next Music for USB/SD mode: Next CH for FM mode 5
39. Channel -2 USB/SD Record and Replay button 40. Repeat Channel -2 USB/SD song 41. Sound Effects selection 42. USB2 volume control 43. Power Switch and DC 13.5V 2A input: Use adapter for charging. Important Note: Use the 'Match Code' function button (located at the back of the mixer unit) upon your first time connecting / pairing any wireless audio receiver units. The Match Code function will prevent the interference of any outside/external audio signals. Multi-Receiver Connection: If you have purchased additional PRTPMX6BURC receiver units, follow the below steps to connect additional speakers to your audio setup: Connecting Additional Receivers / Speakers to the PMX6BU - DJ Sound FX Audio Mixer System 1. Designate one receiver to act as the MAIN RECEIVER -- and place it to the side. 2. Press the POWER button on all additional receiver units you are attempting to connect (the EMIT indicator lights will blink). 3. While the EMIT indicator is blinking, press the 5.8G/BT button (the EMIT indicator light will stop blinking and the RXD indicator light will remain solid). 4. While the RXD indicator light remains solid, press and hold the 5.8G/BT button for ~ 5 seconds (or until the EMIT indicator blinks red). 5. While the EMIT indicators blink red on all additional receiver units, press the POWER button on the designated MAIN RECEIVER (the EMIT indicator will blink). 6
6. While the EMIT indicator blinks on the MAIN RECEIVER, press and hold the 5.8G/BT button for ~ 5 seconds (or until the EMIT indicator blinks red). 7. Wait for the indicator lights on the additional receiver units to stop blinking -- this ensures they are successfully paired (however, the MAIN RECEIVER indicator lights will continue to blink). 8. While only the indicator light on the MAIN RECEIVER is blinking, it s time to connect via Bluetooth. Goto your device s Bluetooth network list and get connected (upon successful Bluetooth connection, the MAIN RECEIVER indicator light will remain lit). 9. Stream some sound! The MAIN RECEIVER will deliver the wireless audio to any paired additional receiver units. Ensure all receiver units are connected to a compatible speaker with the audio connection cables via the AUX OUTPUT. Notes: * Pyle Model: PMX6BU - DJ Sound FX Audio Mixer, sold separately. * When pairing the system, ensure both the mixer and wireless receiver(s) are within range to initiate a successful wireless pairing sequence. * Ensure you are using a compatible speaker system with Aux audio line-in mode is activated on the connected speaker. Battery Charging: When the battery is low, power indicator will flash on the receiver. Charge the DJ Sound FX Mixer or receiver immediately. For DJ Sound FX Mixer, use the 13.5V 2A adapter to charge the unit. Red LED indicator will be ON, when fully charged it will turn to green. For the Mixer, use our adapter to charge the unit. Red LED indicator will be ON, when fully charged it will turn to blue. For the receiver, use our cable and your smartphone adapter for charging. Red LED will be ON, after fully charged it will turn to blue. 7
PRTPMX6BURC Wireless Audio DJ Sound Receiver Off On INPUT DC12V-15V ON OFF Power LED Work LED Lock Code Match Code PMX6BU Rear Panel of Mixer Console 8
PMX6BU Wireless DJ Sound FX Audio Mixer Wireless BT Streaming Stage & Studio Mixer System with Karaoke Style Mic-Talkover, MP3/USB/SD Readers, FM Radio Features: DJ Mixer Audio Streaming System Kit Wirelessly Stream Your Sound to Connected Speakers Bluetooth Audio Ability & Included Wireless Receiver Multi-Channel Mixing: Mix, Scratch & Blend Your Beats Built-in Rechargeable Battery: Compact & Portable Style Simple Plug-and-Play Operation FM Radio with Digital LCD Display Start a Party with Karaoke Style Control Create Your Own Music with Recording Mode Mic Talkover Control: Microphone Priority Function (2) 1/4 Microphone / Guitar Inputs, 6.35mm MP3 Digital Audio File Playback Dual USB Flash Drive Readers Dual SD Memory Card Readers Headphone Jack, 3.5mm LED Backlit Illuminated Mixer Console Independent Channel Controls and Cross Fader Preset Button DJ Sound FX with Jog Wheel Sound Adjustment Configuration: Mic Volume, Delay, Echo, Bass, Treble Works with PA Speakers, Home Theater Systems, Bookshelf Speakers, etc. 9
Wireless Audio Receiver: Streams DJ Mixer Audio to External Speaker Systems USB Power / Charge Port Aux (3.5mm) Connectors Connection LED Indicator Lights Speaker Audio Transmission Distance: Up to 165 + ft. *Connect Additional Speakers with Additional Receivers (Not Included) *Additional Wireless Audio Receivers Sold Separately, Pyle Model: PRTPMX6BURC Bluetooth Connectivity: Bluetooth Music Streaming Ability Transfers Wireless Audio to Connected Receivers Simple & Hassle-Free Pairing Works with All of Today s Latest Devices Smartphones, Tablets, Laptops, Computers Bluetooth Version: 4.0 WIFI solution: 5.8G Bluetooth Network Name: PyleUSA Wireless Device Range: 30 + ft. 10
What s in the Box: Bluetooth DJ Mixer Wireless Audio Receiver Receiver USB Charge Cable Aux (3.5mm) Audio Cable Power Adapter Technical Specs: SS/N Ratio: 90dB Wireless Support Match: 1:1 /1:N Receiver Sensitivity: 86dBm Digital Audio File Support: MP3, WMA Maximum USB/SD Memory Support: 16GB Receiver Rechargeable Battery: 3.7V Li-iOn, 1800Mah Mixer Rechargeable Battery: 11.1V Li-iOn, 2000Mah Power Cord Length: 3.3 ft. Mixer Power Supply: 110/240V (13.5V Adapter) Dimensions (L x W x H): 11.7 x 10.3 x 3.5 -inches 11