Product information Page 1/10 Illustration splice VIK closed Product description Properties: Wall-mount housing with two lockable swing doors, two different locks to separate network and building cabling. Easy, space saving wall mounting. The cable management area offers easy access and a secure routing of pigtails or VIKs. Cable entries in different shapes allow for a very flexible cable feeding and the cable can be inserted from top or bottom. Between 1 and 8 cables or 1 and 3 VIKs can be inserted, depending on the size of the distributor. More cable entries can be ordered as additional accessory if this should not be enough. Patch cords can be easily inserted from top or bottom through the foam cable entry in the patch area. If these cable entries are exchanged it is also possible to connect VIKs from the patch area (see optional accessories). Available in two sizes: Size S for up to 48 plug connections Size M for up to 96 plug connections Each size is available in two variants: Variant splice: with adapters and pigtails for fiber types OM3, OM4, OM5 and OS2 Variant VIK: with adapters, prepared for pre-terminated installation cables (VIK) For SC-Duplex, SC-Simplex, LC-Duplex, E2000 and ST-Duplex. Unused openings in the patch panel are closed by blind plugs. Areas of use: Floor cabling Distribution systems in buildings Cabling in industrial areas The is a distributor for universal use in floor cabling or as a building distribution point in the equipment room.
Product information Page 2/10 Mechanical properties OpDAT WV S OpDAT WV M Housing Powder-coated steel-sheet, light gray RAL 7035 Patch panel Powder-coated steel-sheet, light gray RAL 7035 Adapter positions are numbered Dimensions WxHxD mm 300 mm x 300 mm x 100 mm 400 mm x 400 mm x 100 mm Weight (empty) 3.1 kg 4.6 kg Type of protection according to IEC 60529 IP20 Capacities Adapters max. 24 LC-D, SC, E2000 or max. 12 SC-D, ST-D max. 48 LC-D, SC, E2000 or max. 24 SC-D, ST-D Pigtails max. 48 max. 96 Splice trays max. 4 max. 8 Cable entries Variant splice (included in delivery) 2 entries for 2x M20/PG16 each and 2 entries for patch cords 2 entries for 4x M20/PG16 each and 2 entries for patch cords Variant VIK (included in delivery) 1 entry with 2x U-shaped openings for VIK with universal cable and 1 entry for 2x M20/PG16 and 2 entries for patch cords 1 entry with 3x U-shaped openings for VIK with universal cable and 1 entry for 4x M20/PG16 and 2 entries for patch cords optional 1 entry for 1x M25/PG21 1 entry for 2x M20/PG16, 2x M25/PG21 and 3x M25/PG21
Product information Page 3/10 Variant splice Equipped with splice trays, splice holders, pigtails and adapters Pigtails are inserted ready to splice in the splice trays. The pigtail connectors are cleaned and inserted into the adapters, assignment according to color code as per IEC 60304. Included in delivery: 2 cable entries for M20/PG16 2 cable glands M20 2 cable entries for patch cords Cable guides, cable ties, spiral tubes Material for wall mounting Equipped with adapters Prepared to fix pre-terminated installation cables (OpDAT VIK). Depending on the selected type of VIK it is necessary to order additional accessories for cable fixing. Included in delivery: 1 cable entry for VIK with universal cable 2 VIK retaining plates 1 cable entry for M20/PG16 2 cable entries for patch cords Cable guides Material for wall mounting Variant VIK
Page 4/10 Product information Accessories for the variant VIK Size S Size M Variants VIK up to 12 fibers up to 24 fibers up to 48 fibers VIK with mini breakout cable M20/PG16 PG13.5 optional: 150811P1613-E (optional) M20/PG16 optional: optional: 150811P1613-E (optional) PG13.5 PG16 up to 4 fibers up to 12 fibers PG21 up to 24 fibers VIK with breakout cable
Product information Page 5/10 Order information for Wall Distributor size S Fiber type Adapter type Adapter color Number of adapters Number of pigtails Part number Variant splice LC-Duplex aqua 24 48 1503257724-E OM3 SC-Duplex aqua 12 24 150325BA12-E ST-Duplex metal 12 24 150325D112-E LC-Duplex violet 24 48 1503277524-E OM4 SC-Duplex violet 12 24 150327BB12-E ST-Duplex metal 12 24 150327D112-E OM5 LC-Duplex lime green 24 48 1503287M24-E SC-Duplex lime green 12 24 150328BM12-E LC-Duplex blue 24 48 1503297424-E LC-Duplex APC green 24 48 1503297624-E SC-Duplex blue 12 24 150329E212-E OS2 SC-Duplex APC green 12 24 150329F212-E ST-Duplex metal 12 24 150329D112-E E2000 blue 24 24 1503295824-E E2000 APC green 24 24 1503295924-E
Product information Page 6/10 Order information for Wall Distributor size S Fiber type Adapter type Adapter color Number of adapters Number of pigtails Part number Variant VIK LC-Duplex aqua 24 -- 1503207724-E OM3 SC-Duplex aqua 12 -- 150320BA12-E ST-Duplex metall 12 -- 150320D112-E LC-Duplex violett 24 -- 1503207524-E OM4 SC-Duplex violett 12 -- 150320BB12-E ST-Duplex metall 12 -- 150320D112-E OM5 LC-Duplex lindgrün 24 -- 1503207M24-E SC-Duplex lindgrün 12 -- 150320BM12-E LC-Duplex blau 24 -- 1503207424-E LC-Duplex APC grün 24 -- 1503207624-E SC-Duplex blau 12 -- 150320E212-E OS2 SC-Duplex APC grün 12 -- 150320F212-E ST-Duplex metall 12 -- 150320D112-E E2000 blau 24 -- 1503205824-E E2000 APC grün 24 -- 1503205924-E
Page 7/10 Product information Order information for Wall Distributor size S Part number Cable entries Cable glands Thread reducer Crimp splice protection for 2x M20 15032Z001-E for 1xM25 15032Z003-E for 2 VIK retaining plates 15032Z004-E for patch cords (with foam) 15032Z005-E VIK retaining plate 15081106-E M20 (clamping range 7 to 12 mm) 150811M20-E M25 (clamping range 10 bis 16 mm) 150811M25-E PG16 to PG13,5 150811P1613-E Packing unit with 12 pieces 15090401-E Packing unit with 150 pieces 15090401-I More variants available on request. Use our cable configurator on our website www.metz-connect.com to configure the necessary patch cords or VIKs. It allows you to configure cables according to your individual specifications and to order them directly. Optional accessories/spare parts
Product information Page 8/10 Order information for Wall Distributor size M Fiber type Adapter type Adapter color Number of adapters Number of pigtails Part number Variant splice LC-Duplex aqua 48 96 1503357748-E OM3 SC-Duplex aqua 24 48 150335BA24-E ST-Duplex metal 24 48 150335D124-E LC-Duplex violet 48 96 1503377548-E OM4 SC-Duplex violet 24 48 150337BB24-E ST-Duplex metal 24 48 150337D124-E OM5 LC-Duplex lime green 48 96 1503387M48-E SC-Duplex lime green 24 48 150338BM24-E LC-Duplex blue 48 96 1503397448-E LC-Duplex APC green 48 96 1503397648-E SC-Duplex blue 24 48 150339E224-E OS2 SC-Duplex APC green 24 48 150339F224-E ST-Duplex metal 24 48 150339D124-E E2000 blue 48 48 1503395848-E E2000 APC green 48 48 1503395948-E
Product information Page 9/10 Order information for Wall Distributor size M Fiber type Adapter type Adapter color Number of adapters Number of pigtails Part number Variant VIK LC-Duplex aqua 48 -- 1503307748-E OM3 SC-Duplex aqua 24 -- 150330BA24-E ST-Duplex metal 24 -- 150330D124-E LC-Duplex violett 48 -- 1503307548-E OM4 SC-Duplex violet 24 -- 150330BB24-E ST-Duplex metal 24 -- 150330D124-E OM5 LC-Duplex lime green 48 -- 1503307M48-E SC-Duplex lime green 24 -- 150330BM24-E LC-Duplex blue 48 -- 1503307448-E LC-Duplex APC green 48 -- 1503307648-E SC-Duplex blue 24 -- 150330E224-E OS2 SC-Duplex APC green 24 -- 150330F224-E ST-Duplex metal 24 -- 150330D124-E E2000 blue 48 -- 1503305848-E E2000 APC green 48 -- 1503305948-E
Page 10/10 Product information Order information for Wall Distributor size M Part number Cable entries for 4x M20 15033Z001-E for 2x M20 and 2x M25 15033Z002-E for 3x M25 15033Z003-E For 3 VIK retaining plates 15033Z004-E For patch cords (with foam) 15033Z005-E VIK retaining plate 15081106-E Optional accessories/spare parts Cable glands Thread reducer Crimp splice protection M20 (clamping range 7 to 12 mm) 150811M20-E M25 (clamping range 10 to 16 mm) 150811M25-E PG16 to PG13.5 150811P1613-E Packing unit with 12 pieces 15090401-E Packing unit with 150 pieces 15090401-I More variants available on request. Use our cable configurator on our website www.metz-connect.com to configure the necessary patch cords or VIKs. It allows you to configure cables according to your individual specifications and to order them directly. Optional accessories/spare parts