IG7600 Smartphone Business Communication System Copyright 2015, All Rights Reserved. Ver161091105
Installation Components M22-1 -
System Installation Follow the flowchart to install IG7600 system. The red number (1) ~ (8) is marked at upper left corner of each process block. ou can find the detail explanation by these numbers in the following pages. - 2 -
(1) PSTN Lines Connection ou can connect up to four (4) analog (standard or PSTN) telephone lines to your IG7600. Connect one line to each port, in the order that you want them to ring 1 4. Use the telephone line cords to connect the telephone lines to the IG7600. (2) Install IG7600 behind a router Connect the WAN port of your IG7600 to your existing network, leave the LAN port disconnected after using it for initial installation programming. (IG7600 is connecting to a router) (IG7600 is connecting to a modem router) - 3 -
Powering up Plug the IG7600 in and allow it to power up without connecting any telephones. When the power LED stops flashing the IG7600 will be fully powered up and operational. Login Web page of IG7600 Use an Ethernet cable to connect your Personal Computer, Laptop or Desktop running Windows XP, Vista or Windows7/8, to the LAN port of the IG7600. Open your browser and enter 192.168.123.1 in the address bar, and press enter. When prompted enter the user name, which is admin1234 and password which is the word admin plus the last 6 alphanumeric characters of the system s WAN MAC address (lower case), which is found on the label on the back of the system. - Default IP address: 192.168.123.1 - User name: admin1234 - Password: adminxxxxxx For Example, WAN MAC address: 001915DA73FB Password: adminda73fb Attention: To secure your system against unwanted outside intrusion (hacking), we strongly recommend that the first thing you do is change all of the System s Passwords! Before you begin programming you should change all three levels of passwords, admin1234, support and user. A password of up to 16 alphanumeric characters may be used and we recommend that you use at least 10. The best passwords consist of upper and lower case characters and punctuation. MAKE SURE TO MAKE A NOTE OF OUR PASSWORD! - 4 -
To change the password, log in as the Administrator go to: Management --> Access Control --> Password Default Login and Passwords: Level/Rights Login Default Password Administrator admin1234 adminxxxxxx New Password Administrator support supportxxxxxx User (Limited) user userxxxxxx xxxxxx = The last 6 alphanumeric characters of the system s WAN MAC Address (lower case) - 5 -
(3) System Configuration 1. Set IG7600 WAN to static IP address 2. Set router s Port Forwarding to IG7600 or DMZ Setting in router 1. Set IG7600 WAN to Static IP address The existing network (Router) will assign an IP address to IG7600 WAN, set the IP address to static IP in WAN page in IG7600. Go to Advanced Setup -> WAN, and then change Network Type to Static. - 6 -
2. Set router s Port Forwarding to IG7600 or DMZ Setting in router The tablet lists these ports which are used by IG7600. These ports must be opened for IG7600. Used by Protocol Port Range Need port forwarding Changeable IG7600-MOCET (When behind NAT) SIP UDP 5070 (Mandatory for remote phone application) RTP Proxy UDP 35000 ~ 35150 N (Mandatory for remote phone application) DSP Bound UDP 40000 ~ 40012 N (Mandatory for remote phone application) Paging Caller RTP UDP 20500, 20510, 20520, (Only when you need to enable N 20530 paging call function for remote phone) IGCP UDP 38600 N (Mandatory for remote phone application) IGDDP UDP 38500 N (Only when you deploy IGW Group function) IP Camera TCP 38800~38808 N (Only when you need to access to IP Camera from remote phone (M54)) PTC UDP 5897 (Only when you deploy APS-PTC function) Web TCP 80 (Only when you need accessing Web server from remote) FTP TCP 21 (Only when you need accessing FTP server from remote) TFTP UDP 69 (Only when you need accessing - 7 -
TFTP server from remote) Telnet TCP 23 SSH TCP 8822 Door Phone TCP 49003~49006 (reserved) N Live Record UDP 35248, 35151~35248 N (Only when you need accessing Telnet from remote) (Only when you need accessing SSH from remote) (Only when you need to access to Door Phone from remote phone) (Only when you need to enable Live Recording function for remote) (4) Assign router WAN IP Address to NAT Traversal When router WAN is a static IP address, setup the Router External Address to router WAN IP in NAT Traversal page. Step 1: Go to Voice --> NAT Traversal Step 2: Setup the Router External Address to WAN IP address Step 3: Uncheck UPNP Port-Mapping Enable Step 4: Click Save Settings button. Input router WAN IP address. Uncheck UPNP Port-Mapping Enable. - 8 -
(5) Router WAN Is Assigned a Dynamic IP IG7600 Configuration 1 Setup DDNS 2 Assign DDNS Host Name to NAT Traversal 1. Setup DDNS When the router s WAN is assigned a dynamic IP from ISP (Internet Service Provider), ou need to configure DDNS (Dynamic DNS) in IG7600. (If you don t know what the network type is, please check with your ISP) Step 1: Go to Advanced Setup --> Dynamic DNS Step 2: Select Use Manual DDNS and then click Save button Step 3: Click Add button - 9 -
Step 4: Edit the DDNS information, and then click Apply/Save button. 2. Assign DDNS Host Name to NAT Traversal Step 1: Go to Voice --> NAT Traversal Step 2: Setup the Router External Address to DDNS host name Step 3: Uncheck UPNP Port-Mapping Enable Step 4: Click Save Settings button. Input DDNS host name. (For example: kevintsou09.ddns.net.) Uncheck UPNP Port-Mapping Enable. - 10 -
(6) IG7600 Installation Finish The IG7600 network configuration is complete after you finish above steps. In next steps, you will connect your IP phone and Smartphone to IG7600 system. - 11 -
(7) IP Phone Connection Plug and play When the M22 IP phone connected to the same switch as IG7600 s WAN, M22 will auto register to IG7600. IP phone connected to same network switch as IG7600 s WAN. Remote IP phones connecting to IG7600 When the M22 is remote connecting to IG7600 via Internet, user needs to manual configure the registration information for IG7600 and M22. Remote IP phone Local IP phones - 12 -
Configuration 1. Add new phone number and password in Phone Extension page of IG7600. 2. Configure the SIP register information in SIP page of M22. 1. Add new phone number and password in Phone Extension page of IG7600 Step 1: Go to Voice --> Phone Extension Step 2: Add new phone number and password Step 3: Click Save Settings button - 13 -
2. Configure the SIP register information in SIP page of M22 Step 1: Login M22 web page Step 2: Select SIP tag Step 3: Edit the SIP Proxy Server, Registrar Server, phone number and password Step 4: Click Save Settings button - 14 -
(8) M54 App Installation and Registration 1. M54 App Quick Installation for ios - M54 App installation - M54 App Setup - Basic operation for M54 App 2. M54 App Quick Installation for Android - M54 App installation - M54 App Setup - Basic operation for M54 App - 15 -
M54 App Quick Installation for ios Main interface of M54 Step 1 Connect your phone to IG7600 s Wi-Fi AP. Using Wi-Fi settings of your phone. (Search for IG7600-XXXXXX SSID). Step 2 Download M54 from App Store and install application on your phone. Scan QR Code to download M54 App for iphone Main interface of M54 No. Feature Description On-line On-line and Call Forwarding is enabled 1 System Status Indicator On-line and DND is enabled Off-line New voice message(s) available 2 System Status Indication System prompts (registration, call progress, warning ) Network condition indication System Status Indicator (same as 1) 3 Extension Status It will be marked with red frame if the system phone is off-line and green frame if on-line 4 Line Status Indication Grey Steady Steady Fast flash Slow flash Slow flash Fast flash Line is idle Line is currently used by you Line is busy Incoming call arrives, click to pick up Line is put on hold by me, click to retrieve Line is put on hold by others, click to answer Incoming call arrives but ringing on other extensions, click to pick up the call 5 Call Log Call history, including Call Made Received Missed 6 Other Functions IP-CAM, Paging, VM and Outdoor phone functions can be activated from here. Settings to configure your phone 7 Keypad To manually dial the numbers to make calls
Setup M54 1. Check IG7600 SSID 1-1. Tap Next 2. Enter your data 2-1. Tap Next 3. Press on on IG7600 3-1. Tap Start Registration 4. Check Registration Successful Msg.
Making Calls 5. Using green contact list 5-1. Tap to dial 6. Using Call Log 6-1. Tap to dial 7. Using keypad 7-1. Key in number 7-2. Tap Dial Managing calls Turn on/off mute mode Turn speaker on/off Bring up the keypad Put active call on hold Transfer call to internal or external number Establish a new call
Establishing a conference call 1. Tap New Call when on active call 2. Tap green Or key in the number Tap Dial 3. Tap conference to establish the conference 3-Way conference is established Conference call function is not available at the free version. Please purchase if needed. Select Functions -> Setup -> Advanced Features -> Conference
Other functions Tap to see the IP Cam list and choose camera to monitor Tap to initiate a paging call Tap to access voice message Tap to access app s settings Tap to access outdoor phone settings
M54 App Quick Installation for Android Phone Main interface of M54 Step 1 Connect your phone to IG7600 s Wi-Fi AP. Using Wi-Fi settings of your phone. (Search for IG7600-XXXXXX SSID). Step 2 Download M54 from Google Play and install application on your phone. Scan QR Code to download M54 App for Android Phone Main interface of M54 No. Feature Description On-line On-line and Call Forwarding is enabled 1 System Status Indicator On-line and DND is enabled Off-line New voice message(s) available 2 System Status Indication System prompts (registration, call progress, warning ) Network condition indication System Status Indicator (same as 1) 3 Extension Status It will be marked with red frame if the system phone is off-line and green frame if on-line 4 Line Status Indication Grey Steady Steady Fast flash Slow flash Slow flash Fast flash Line is idle Line is currently used by you Line is busy Incoming call arrives, click to pick up Line is put on hold by me, click to retrieve Line is put on hold by others, click to answer Incoming call arrives but ringing on other extensions, click to pick up the call 5 Call Log Call history, including Call Made Received Missed 6 Other Functions IP-CAM, Paging, VM and Outdoor phone functions can be activated from here. Settings to configure your phone 7 Keypad To manually dial the numbers to make calls
Setup M54 1. Check IG7600 SSID 1-1. Tap OK 2. Enter your data 2-1. Tap Continue 3. Press on on IG7600 3-1. Tap Starting 4. Check Registration Successful Msg.
Making Calls 5. Using green contact list 5-1. Tap to dial Managing calls 6. Using Call Log 6-1. Tap to dial 7. Using keypad 7-1. Key in number 7.2 Tap Dial Turn on/off mute mode Turn speaker on/off Bring up the keypad Put active call on hold Transfer call to internal or external number Establish a new call
Establishing a conference call 1. Tap New Call when on active call 2. Tap green contact list Or key in the number Tap Dial 3. Tap conference to establish the 3-Way conference is established Conference call function is not available at the free version. Please purchase if needed. Select Functions -> Settings -> Device Settings -> Purchase advanced features
Other functions Tap to see the IP Cam list and choose camera to monitor Tap to initiate a paging call Tap to access voice message Tap to access app s settings Tap to access outdoor phone settings