) ( idim Standalone idim Multisensor (), (PIR extension) (PIR extension) (Master ) RJ Style PC Cable 0 V LI 6 ma idim Ballast s L N www.helvar.com idim Sol o SW Interface Modul e com 00-0 V 50-60Hz SW 0 ma ta: 0 C...50 C com tc: 75 C tc 0,5...,5 6 mm idim Sense L I 6 ma - L I - LI ( ) Switch Control idim Solo DIGIDI M Panels Switch Control via DIGIDIM 6 idim Sense This genius LI sensor includes multiple features all in a very compact package. It has 6 pre-programmed operational modes for different lighting control applications. It features PIR, CL, IR as well as a simple rotating Mode Selector. Stand-alone Mode Selector Easy click mounting from side luminaire Interchangeable skins Clip-on PIR restrictor 0 idim Solo idim Solo is a compact and versatile interface module for use inside or side the luminaire. It is a powerful unit that enables easy and quick wiring for both alternatives; idim stand-alone and networked lighting systems. LI power supply, 6mA (total) Switch control inputs x LI puts x idim Sense connection (RJ-style), cable available Helvar part no. 5060, 50 cm Mains connection input 0 idim Remote The idim Concept is a pre-programmed lighting system, though there may be need to control or modify it manually. The idim Remote is a versatile remote control providing the following functionalities: Configuration of target light levels Advanced programming (upload settings via PC zap function ) Graphical PC user interface Desktop holder / wall mount holder 8 Data is subject to change with notice. More information at: www.helvar.com
Select the mode The luminaire based idim concept provides 6 -of-box application modes that are easy to select just by rotating the Mode Selector on the idim Sense. The modes are designed to fulfil the needs for easy-to-use, energy saving lighting control. The basic functions are pre-programmed and are fully adjustable to meet all requirements. Classroom Optimal lighting and maximum energy saving are auto-matically achieved thanks to the intelligent technology. idim adjusts the lights depending on presence detection and ambient light. Out-ofbox features can be easily customised to meet different needs. 6 5 Corridor link Wherever occupancy is detected, the whole corridor lights up at once. Multiple sections / sensors can be interlinked together creating a powerful solution that can light up a corridor of every length. ON: Manual 5 min. 0% 0 min. Off Single office The simple -of-box functionality responds to area occupation and ambient light always producing the right light. Automatic features enable energy saving and user comfort. Advanced features as individual control and custom settings are possible with idim Remote, PC-interface and DIGIDIM modular panels. Corridor hold This unique application links the single offices with the corridor link mode. Whenever the offices are occupied, the corridor is held lit. The corridor hold is a fully automatic function that promotes energy savings as well as safety. Open plan office This mode keeps the lights on only when and where needed. It is an energy and cost efficient application creating a safe and convenient working environment for everyone at the same time. All advanced features are available for custom fine tuning. Meeting room This mode takes care that the lights are switched on only when needed. You can switch the lights both on and off manually or let the system take care of the switching off. The constant light feature adjusts the right lighting and scene control is possible with idim Remote and DIGIDIM modular panels. 60 min. Off ON: Manual Constant light ( ) Fixed light PIR presence Lights On / Off PIR absence Occupancy time light level Transition time Off Lights to min. / off when enough daylight Data is subject to change with notice. More information at: www.helvar.com 8
0 mm idim Sense with Fascia. mm 7. 55 mm 5 mm idim Sense with Fascia 58 mm 8.5 mm. mm Luminaire mounted, weight 5 g Connections (Master) Extension PIR sensor mode only idim Solo RJ Style Cable (PC ) - ( ) LI EL-iDimBallasts () LI 6 ma The idim Sense is a luminaire based LI sensor. It combines a movement detector (PIR), remote control receiver (IR) and photocell (CL) in one enclosure. The manual mode selector allows the user to easily select one of the 6 -of-box application modes. The 6 is also able to act as an extension PIR sensor, connected to the LI bus of the idim Solo. Key Features PIR, Constant Light and Infrared control Easy to select application modes Clip-on fascia in different colours Clip-on PIR Restrictor Mode selector with LED feedback LI consumption: 0 ma Ambient temperature: 0 50 C Relative humidity: 0% maximum, non-condensing Storage temperature: -5 C 75 C Constant light reception area: 60, m mounting height PIR detection area: 85, m mounting height (Clip-on PIR Restrictor exluded) Product Order Code: 6 8 Data is subject to change with notice. More information at: www.helvar.com REF 0 //0
idim Solo (0) Luminaire mounted, weight 0 g Connections RJ Style PC Connector L N - - LI LI Switch-Control The idim Solo is used as an interface module to connect the idim Sense (6 Standalone) and idim ballasts as well as user interfaces. Additionally, the idim Solo can be used as a LI power supply unit (PSU). The unit is housed in a standard ballast-style enclosure (0 mm width x mm height) making it fast and easy to assemble. Key Features Power capability: 6 ma (LI ), (LI ) or 6 ma when operating in parallel x LI puts x Switch control inputs idim Sense connection (RJ style, PC) Mains connection Product Order Code: 0 Mains Supply: 00-0 VAC, 50-60 Hz (nom.) 85-6 VAC, 5-65 Hz (absolute) Protection: Internally resettable fuse (PTC) x LI puts: LI : 6 ma LI : Ambient temperature: 0 50 C Relative humidity: 0% max, non-condensing Storage temperature: -5 C 75 C Data is subject to change with notice. More information at: www.helvar.com REF 05 //0 85
idim Remote (0) 5 mm OK 0mm Fn mm Non-flammable polycarbonate, halogen free., weight 0 g A H OK B C D E I Fn F G J K A. LED indicator (Flashes when comms transfer is in progress and when buttons pressed) B. Up modifier C. Down modifier D. OK key E. - Scene Recall /Configuration F. Function key (Fn) G. Lights off ( ) H. Transmitter I. Mode selector button J. Battery cover K. USB connection (Mini B) The Infra-red idim remote control allows the user to control, modify and configure standalone lighting applications fitted with a 6 idim Sense. This hand held unit is fitted with eleven buttons that control basic functions such as raising and lowering the general light level and selecting four pre-set scenes and off. Pressing certain button combinations together allow basic programming functionality. These include modifying preset levels and running test sequences. Additional Features Mountable wall bracket / desk stand included Connects to PC for advanced lighting setup via USB cable Product Order Code: 0 Power Supply: x AAA (LR0).5 V Batteries Operating range: Approx. 0 m Operating frequency: 6 khz Ambient Temperature: 0 to 0 C Relative Humidity: 0% max, non-condensing Storage Temperature: -0 C to 70 C 86 Data is subject to change with notice. More information at: www.helvar.com REF 06 //0