Revised: 11.1.16 LED AREA / PARKING / STREET LIGHT LAP-G APPLICATION For all applications in site, area, and general lighting requiring high uniformity, excellent vertical light distribution, reduced offsite visibility, reduced on-site glare and effective security light levels. The LAP luminaire delivers exceptional performance in a low-profile design. FEATURES: Die-cast aluminium construction body on which electrical components. Die-cast integral heat sink to provide thermal management. MOUNTING: PMS: Pole mount arm available for 3, 4 and 5 square pole. PMR: Pole mount arm available for 3 (PMR3), 4 (PMR4) and 5 (PMR5) dia. round pole. SF: Adjustable slip fitter mount available for pipe installation (1-1/3 O.D to -3/8 O.D) WM: Wall mount plate. Mounting arm bolts are 34 stainless steel and zinc-plated steel. LED: Color Temperature: 3 / 4 / 5K Color Rendering Index: 7+ CRI. Nichia LED. Lifetime: over 5, hours. ELECTRICAL: Power Efficiency: > 9% Fixture for ambient minimum operating temperatures from -4 C to 4 C (11W can reach +5 C). Input Voltage: 1V-77V, 5/6Hz. THD < % Provided with integrated surge protective device. Over Voltage Protect : Hiccup mode. The power supply shall return to normal operation only after the power is turn-on again. Short Circuit Protect : No damage shall occur when any output operating in a short circuit condition. The power supply shall be selfrecovery when the fault condition is removed. Over Temperature Protect : 11 C Meets ANSI/IEEE C6.41 Category C (outdoors) High. OPTIC: UV stabilized polycarbonate lens. LISTING: UL listed. DLC listed. 3 Suitable for wet location. Tested to IESNA LM8 standards. LM79, LM8. 5 years limited warranty. IP66 Rating. Certified to ANSI C136.31-1, 3.G Level for Bridge/Overpass Applications. ORDERING INFORMATION MODEL LED COLOR TEMP. DISTRIBUTION VOLTAGE LAP-G 7LED 18LED 141LED 188LED 7W 18W 141W 188W /5 /4 /3 5K (Std.) 4K 3K EXAMPLE: LAP-G-18LED/5-T3-UNV-DM-BZ-WM T T3 T4M T5S Type II Type III Type IV Medium Type V Short DIMMING FINISH MOUNTING DM -1V Dimming. (Std.) BZ GR WH BK HS TLPC1 TLPC TLPC3 RS Dark Bronze (Std.) Gray White Black House Shield Twist Lock Receptacle Photocell 1V Twist Lock Receptacle Photocell 77V Twist Lock Receptacle Photocell 1V - 77V Remote handheld configuration tool for FSP-11 * Contact Factory for more options Available custom color (RAL) Please provide us with the RAL number. * Effective Projected Area (EPA) with Square Pole Mounting. OPTIONS FSP-11 (L) (L3) (L4) (L7) SF WM PMS PMR3 PMR4 PMR5 MA UNV 347 48 1-77V (Std.) 347V 48V Slip Fitter Square Pole Mount Arm 3 Round Pole Mount Arm 4 Round Pole Mount Arm 5 Round Pole Mount Arm (Mounts to IP,.375 O.D) -1V Dimming Control Occupancy Sensor 1, FSP-L Lens @ 8 height (up to 44 diameter) FSP-L3 Lens @ height (up to 4 diameter) FSP-L4 Lens @ 4 height (up to 6 diameter) FSP-L7 Lens @ 4 height (up to 1 diameter) NOTES: 1. Must specify lens. (L, L3, L4, L7). Default settings are Title 4 compliant for all spaces that do not require daylighting. For spaces that do require it, adjustments will be necessary for the Hold Off Setpoint and the Photocell functions. 3. DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/qpl to confirm which versions are qualified. UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice. www.utopialightingus.com 135
Type Input Rating Lumen Output (lm/w) Total Lumen Output Drive Current per LED Weight (lbs/kg) EPA Rating (sq ft max.) T 16.1 lm 7644 lm 7 T3 13.3 lm 8977 lm 7W T4M 14.5 lm 964 lm 1.4 A 1.57 lbs / 4.7 kg 1.39 T5S 17.4 lm 951 lm T 17.8 lm 1359 lm 18 141 T3 19.7 lm 11753 lm 18W T4M 17. lm 1365 lm T5S 19.6 lm 1393 lm T 11.7 lm 15768 lm T3 115.5 lm 1637 lm 141W T4M 16.8 lm 17854 lm.1 A 1.56 lbs / kg 1.56.8 A 14.55 lbs / 6.6 kg 1.73 T5S 131.9 lm 18831 lm T 11.3 lm 1554 lm 188 T3 131.9 lm 4645 lm 188W T4M 11.6 lm 86 lm 3.8 A 17. lbs / 7.8 kg.8 T5S 137. lm 5856 lm Polar Candela Distribution (TYPE 3 medium + House Shield) 1,15,3 3,45 4,6 5,75 6,9 Downward Street Side 8,1. 9.1% Downward House Side 71.5 8% Downward Total 8,81.5 1% Polar Candela Distribution (TYPE 3 medium) 1,67,133 3, 4,67 5,333 6,4 Downward Street Side 7,34.4 6% Downward House Side 4,44 37.9% Downward Total 11,753.1 1% 136 www.utopialightingus.com UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice.
Distribution Data (LAP-G-141LED) Polar Candela Distribution (TYPE medium) Illuminance at a Distance (TYPE medium) Center Beam fc Beam Width 1,3,6 3,9 5, 6,5 7,8.ft 4.ft 6.ft 8.ft 1.ft 1,.9 fc 5 fc 113.7 fc 63.9 fc 4.9 fc 3.7 ft 7.3 ft 11. ft 14.7 ft 18.4 ft 18.3 ft 36.5 ft 54.8 ft 73. ft 91.3 ft Polar Candela Distribution (TYPE 3 medium) Illuminance at a Distance (TYPE 3 medium) Center Beam fc Beam Width 1,5 3,.ft 4.ft 847. fc 11.8 fc 3.1 ft 6. ft 1.5 ft 3. ft 4,5 6.ft 94.1 fc 9. ft 4.5 ft 6, 8.ft 53. fc 1.3 ft 6. ft 7,5 9, 1.ft 33.9 fc 15.4 ft 7.4 ft Polar Candela Distribution (TYPE 4 medium) Illuminance at a Distance (TYPE 4 medium) Center Beam fc Beam Width 1,467,933.ft 4.ft 855.8 fc 13.9 fc 3.4 ft 6.8 ft 1.4 ft.7 ft 4,4 6.ft 95.1 fc 1. ft 31.1 ft 5,867 8.ft 53.5 fc 13.6 ft 41.4 ft 7,333 1.ft 34. fc 17. ft 51.8 ft 8,8 Polar Candela Distribution (TYPE 5 short) Illuminance at a Distance (TYPE 5 short) Center Beam fc Beam Width 1,17,433.ft 4.ft 1,766.1 fc 441.5 fc 4.9 ft 9.7 ft 4.3 ft 8.6 ft 3,65 6.ft 196. fc 14.6 ft 13. ft 4,867 8.ft 11.4 fc ft 17.3 ft 6,83 1.ft 7.6 fc 4.3 ft 1.6 ft 7,3 UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice. www.utopialightingus.com 137
LAP-G 7W * Optional FSP-11 shown 18. (46.8) 15.46 (39.8) 19.49 (495.) 15.46 (39.8).4 (1) (.9) 9.7 (46.6) 17.74 (45.8) 15.46 (39.8) 8 (.8).39 5. 19.1 (48.9) 15.46 (39.8) 3.5 (9) 6.6 (168).47 (1.) 1 (5.4) 1.4 (6.9) (.9) 1.5 (539.8) 15.5 (394.8).65 (66.8).5 (63.3) 1.5 6 (151.5).15 138 www.utopialightingus.com UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice.
LAP-G 18W * Optional FSP-11 shown (513.8) 17.47 1.5 (545.) 17.47.4 (1) (.9) 9.7 (46.6) 19.7 (5.8) 17.47 8 (.8).39 5. 1 (533.8) 17.47 3.5 (9) 6.6 (168) 1 (5.4).47 (1.) 1.4 (6.9) (.9) 3. (588.8) 17.5.4.5 (6.) (64.5) 5.9 (151.5) (145.) 8.3 7.3 (184) 1.9 (49.8) UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice. www.utopialightingus.com 139
LAP-G 141W * Optional FSP-11 shown (564.8) 3.4 (594.8).47 (1.).47 (1.) (.9) (.9) 1.7 (551.8) 8 (.8).39 3.5 (596.) 3.5 (9) 6.6 (168) 1 (5.4) 9.7 (46.6) 5. (639.8).4.5 (6.) (64.5) 5.9 (151.5) (145.) 8.3 9.3 (35) 1.9 (49.8) 14 www.utopialightingus.com UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice.
LAP-G 188W * Optional FSP-11 shown 6.4 (669.3) 3.6 (599.3) 7.7 (7.7) 3.7 (61.3).39 (.9) 9.7 (46.6) 6 (658.3) 3.7 (61.3) 8 (.8).39 6.4 (669.3) 3.6 (599.3) 3.5 (9) 6.6 (168).39 1.4 (6.9) 1 (5.4) (.9) 9. (741.8) 3.5 (596.8).5 (64.5).4 (6.) 5.9 (151.5) 8.3 13.3 (337.) 1.9 (49.8) UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice. www.utopialightingus.com 141
Digital High/Low Passive Infrared Fixture Integrated Outdoor Sensor by Wattstopper FSP-11 Fully adjustable high and low dimmed light levels Designed for LED fixtures; rated for extreme temperatures and up to, on/off cycles Hold off setpoint with automatic calibration option for convenience and added energy savings Adjustable via handheld wireless configuration tool IP66 rated with choice of lenses for wet and outdoor locations, and mounting heights from 8 to 4 Adjustable time delay and cut off delay Product Overview Description: The FSP-11 mounts in an outdoor lighting fixture and provides multi-level control based on motion. The sensor also includes a photocell to measure the ambient light level. It controls -1 VDC LED drivers or dimming ballasts, as well as non-dimming ballasts and, with an FSP-Lx Lens, is rated for wet and cold locations. All control parameters are adjustable via a wireless configuration tool capable of storing and transmitting sensor profiles. Wireless Handheld Configuration Tool: Initial setup and subsequent sensor adjustments are made using a handheld configuration tool (FSIR-1). This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cut off and more. The FSIR-1 is also used to initiate automatic calibration of the FSP-11 ambient light level setpoint. The setpoint is used to hold the controlled lighting off or at low level when there is sufficient daylight. The wireless tool stores up to five sensor parameter profiles to speed configuration of multiple sensors. Operation: The sensor ramps lighting On to the selected High mode level when motion is first detected and the ambient light level is below the hold off setpoint. After the sensor stops detecting movement and the time delay elapses, lights fade to the Low mode level. If there is no motion during the subsequent cut off time delay, the lights will turn Off. If the sensor detects motion before the lights turn Off, it ramps the light level back to High, unless the daylight contribution is sufficient to hold lighting at Low. Applications: The slim, low-profile FSP-11 is designed for installation inside the bottom of a light fixture body. When fully assembled and installed in an IP66-rated fixture, the sensor and FSP-Lx lenses are IP66 outdoor rated. The sensor is ideal for areas such as parking facilities, gas stations, pedestrian pathways and warehouses. A choice of four lenses ensures complete coverage for mounting heights up to 4. Features Provides line voltage On/Off switching and -1 VDC dimming control Works with ballasts or LED drivers High and low modes fully adjustable from to 1V Time delay from 5 to 3 minutes Optional cut off delay Adjustable ramp up and fade down times Optional daylighting setpoint features automatic calibration, or permits manual adjustment Configuration tool stores five sensor profiles for quick setup and adjustment of multiple sensors Polycarbonate construction; flame retardant, UV resistant, impact resistant, recyclable UL44A and UL58; IP66 rated (when fully assembled and installed) for use in wet locations Specifications 1/77 VAC, 5/6Hz - Load @1 VAC -8W ballast or incandescent - Load @77 VAC -1W ballast 3 VAC, 5Hz; Load -3W ballast Relay life rating:, cycles (1/77 VAC); 5, cycles (3 VAC) High mode: -1 V; default 1 V Low mode: Off, -9.8 V; default 1 V Time delay: 3 sec., 5-3 min.; default 5 min. Cut off delay: none, 1-6 min. 1-5 hrs.; default 1 hr. Sensitivity: none, low, med, max; default max Setpoint: none, 1-5 fc, auto; default 4 fc Ramp up time: none, 1-6 sec.; default none Fade down time: none, 1-6 sec.; default none Operating temperature: -4-167 F (-4-75 C) Operating Humidity: -9% Weight:.8 oz (8 grams) IP66, CE compliant TUV, UL and cul listed Five year warranty 14 www.utopialightingus.com UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice.
14-18 AWG Solid CU Wire Only 5E4 14-18 AWG Solid CU Wire Only 5E4 LED AREA / PARKING / STREET LIGHT Dimming Wiring Diagram Non-Dimming Wiring Diagram NEUTRAL LOAD LINE NEUTRAL NEUTRAL LOAD LINE NEUTRAL Dimming Driver Class Wiring Only 18- AWG Solid CU Wire Only LOAD GRND DIM- (grey) LINE DIM+ (violet) NEUT FSP-11 High/Low PIR Occupancy Sensor 3 VAC, 5 HZ 1W max ballast 15195r1 Non-Dimming Driver Class Wiring Only 18- AWG Solid CU Wire Only LOAD GRND DIM- (grey) LINE DIM+ (violet) NEUT FSP-11 High/Low PIR Occupancy Sensor 3 VAC, 5 HZ 1W max ballast 15195r1 GROUND *GROUND GRAY (-) VIOLET (+) * The FSP-11 must be properly grounded. UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice. www.utopialightingus.com 143