SYSTEM CONNECTORS COMPLINT WITH EIJ RC-5238 (CONNECTOR FOR IMT-2000 MOBILE PHONES) SYSTEM CONNECTORS FOR W-CDM Receptacle Signal 10 contacts with coaxial, with charging terminals ( type) Plug Signal 10 contacts with coaxial (B type) For charging block, 3 contacts (B type) FETURES [Features for Receptacles and Plugs] 1. Compliant with EIJ RC-5238 (Connector for IMT-2000 mobile phones) 2. Lineup also includes models for peripheral devices (accessories). 3. Compatible for high-speed transfers (USB compatible). 4. Hot plug compatible signal contact. (Step provided on contact location of receptacle.) 5. Metal shell to counter static electricity and EMI. [Features for Plug] 1. Lineup of compact plugs ideal for mobility. 2. Plug mating mouth constructed without alignment location and with metal shell that covers. (Prevents opening of alignment location, has good appearance, and maintains twisting strength.) 3. Lock arm is covered by metal shell to counter deformation caused by outside force. 4. Constructed with bushings in two locations to ensure sufficient retention despite small size. 5. Smooth operation due to large lock button. Mini-plug for charging, 3 contacts (B type) Mini-plug for USB connection, 4 contacts (B type) Compliance with RoHS Directive ORDERING INFORMTION 1. Receptacle 2. Plug 3W: System connectors for W-CDM <Receptacle> 1: SMD (B type) 3: DIP (B type) : With charging terminal ( type) <No. of contacts> 0: 10 contacts 3: 3 contacts XR 3 W <Coaxial> 0: None 1: vailable (a contact: without internal switch) <Packing> P: Embossed tape and paper reel 2 V: Embossed tape and paper reel 5 3W: System connectors for W-CDM <Plug> 0: Plug <Type> 0: Mini type (B type) <No. of contacts> 3: 3 contacts 4: 4 contacts <Coaxial> 0: None XR 3 W
RECEPTCLE ND PLUG COMPTIBILITY TBLE Mini-plug (Cable connection type) Combination table Receptacle Plug (B type)-receptacle ( type) are mated type B type Design side Plug (B type)-receptacle (B type) are mated 10 contacts, coaxial and with charging terminals: 01P Note: When using an Series receptacle ( Type), it must be mounted on the bottom side of the board. B type 3 contacts for charging: 0030 4 contacts for USB connection: 0040 Note: Please see page 140 for information about Type and B Type. 10 contacts, coaxial: 101P 3 contacts: 330V Note: When using an Series receptacle (B Type), it must be mounted on the top side of the board. PRODUCT TYPES 1. Receptacle No. of signal No. of charging Packing quantity Type No. of coaxial Part No. terminals terminal Inner carton (1 reel) Outer carton 3 contacts For charging block None None 330V 800 pcs. 4,000 pcs. (B type) vailable None 101P 1,000 pcs. 2,000 pcs. 10 contacts ( type) vailable 2 contacts 01P 800 pcs. 1,600 pcs. 2. Plug (Cable connection type) No. of signal Packing quantity Type EMI immunity Part No. terminals Inner carton Outer carton 3 contacts Mini-plug for charging (B type) Not available 0030 2,000 pcs. 4 contacts Mini-plug for USB connection (B type) vailable 0040 2,000 pcs. SPECIFICTIONS 1. Characteristics 1) Receptacle-Plug (cable connection type) Specifications Item Receptacle: 10 contacts, Condition with 1 coaxial and 2 charge terminals Rated Current Signal terminal 1 : 5 terminals (No.1, 4, 5, 6, 10), 0.5 : Except 5 terminals Rated voltage Signal terminal 30 V C/DC Signal terminal Max. 50mΩ (Initial) Measured based on the HP4338B measurement Contact method of JIS C 5402, except for the resistance of the resistance Coaxial portion Max. 50mΩ (Initial) cord on the plug side. Electrical High frequency Mechanical Lifetime Insulation resistance Breakdown voltage Min. 1,000MΩ (Initial) Using 250 V DC megger for signal portion and 100 V DC megger for coaxial portion (applied 1 min.) Signal terminal 300V C for 1 min. Rated voltage is applied for one minute and check for Coaxial portion 100V C for 1 min. short circuit or damage with a detection current of 2 m. Electrostatic capacity Max. 2pF Measured frequency: 1000 Hz ±200 Hz Nominal impedance 50Ω pplicable frequency 1.92GHz to 2.17GHz Insertion loss Max. 0.5dB VSWR Max. 1.5dB Lever lock strength 30 N for 1 min The plug is pulled off with the connectors mated. Insertion and removal life of plug and receptacle 10,000 times The connectors are connected and disconnected at a rate of 500 times/hour or less. mbient temperature 25 C to +70 C No freezing or condensation in low temperatures 40 C to +85 C (The allowable storage temperature is Storage temperature Environmental 40 C to +50 C if unopened from original packaging) No freezing or condensation in low temperatures Receptacle Reflow soldering: peak temperature 245 C or less Resistance to soldering heat Manual soldering: Soldering iron temperature 300 C, Plug 5 sec. or less PCB surface temperature near connector terminal Unit weight 0.9g
2. Material and surface treatment Receptacle Plug (cable connection type) Portion Material Surface Resin-molding portion Heat resistant resin (UL94V-0) Shell (01P, 101P only) Stainless steel Ni plating on base, Pd + u plating on surface Contact Copper alloy Contact Ni plating on base, PdNi + u flash plating on surface Terminal Ni plating on base, u flash plating on surface (partial, not including edge) Retention fitting (330V only) Stainless steel Cu plating on base, Sn plating on surface (except for fracture surface) Resin-molding portion Heat resistant resin (UL94V-0) Shell Stainless steel Ni plating (0040 Ground metal plate only) Contact Copper alloy Contact Ni plating on base, u plating on surface Signal terminal soldering u flash plating over Ni Tapping screw Steel Rust proofed DIMENSIONS (Unit: mm) 1. Receptacle Signal 10 contacts with coaxial, with charging terminals ( type) 01P Recommended PC board pattern (TOP VIEW) 6.5±0.2 3.8±0.15 4.9±0.1 0.7 +0.1 0.2 3.7±0.2 1.0 Terminal No.13 2.8 2.1±0.15 0.4±0.05 1.4 15.2 3.25±0.15 1.6±0.15 28.4±0.15 24.8±0.1 (Contact portion) 21.4±0.15 3.25 4.5±0.1 0.5 1.6 0.25±0.1 4.5 13.45±0.1 17.4±0.1 24.8±0.25 (Terminal portion) C 0.5 (0.175) 4.0 1.5 Terminal No.1 0.5±0.07 0.2±0.05 0.3 0 1.5 0.1 dia. 2.8 4 0.3 1.4 0.3 0.6±0.1 1.2±0.1 2.5±0.1 Through hole 2.9 4.4 (0.5) (6) 0.10 1.5±0.1 0.2±0.1 R0.5 R 0.3 R 0.3 1.7±0.1 3.8±0.1 1.9±0.1 1.6±0.05 dia. (Hole) 3.25±0.05 2.1±0.05 0.75±0.05 0.8±0.05 2±0.05 (0.3) (1.6±0.1) 2.5 (5.1±0.1) (9.1±0.1) 13.45±0.05 17.4±0.05 20±0.2 24.8±0.05 Please set the pattern in this range. 1.6±0.05 4.5±0.05 0.5±0.05 0.25±0.05 1.9±0.1 0.55±0.05 1.6±0.1 1.9±0.1 4.3±0.1 1.0±0.1 0.9±0.05 dia. 0.4±0.1 2.3±0.1 dia. Please make pattern of this part on both sides. Circuit diagram of coaxial portion (1) Plug not mating condition (2) Plug mating condition Plug side Ground Center conductor
Signal 10 contacts with coaxial (B type) 101P Recommended PC board pattern (TOP VIEW) Terminal No.1 7.5±0.2 6.5±0.2 0.5±0.07 0.2±0.05 3.8±0.15 1.5±0.15 2.9±0.15 3.7±0.2 0.43±0.07 1.6±0.15 1±0.15 4.5±0.1 15.2 3.25±0.15 16.2±0.15 18.2 0.25±0.1 13.45±0.15 10 2.1±0.15 Terminal No.13 0.4±0.05 0.45 4 2.7 R0.2 1.2±0.1 0.1 Hole 1.7±0.1 2.2±0.05 3.6±0.1 (0.5) 3±0.1 1.6±0.05 3.25±0.05 4.5±0.05 2.1±0.05 0.5±0.05 0.75±0.05 0.25±0.05 0.8±0.05 R (1.6±0.1) 2.5 (0.3) 3.2±0.1 0.45±0.1 1.65±0.1 (2.5±0.1) (6.5±0.1) 10±0.1 13.45±0.05 Please set the pattern in this range. R0.275 R0.275 1.6±0.05 0.275±0.05 0.36±0.05 1.3±0.1 Please make pattern of this part on both sides. Circuit diagram of coaxial portion (1) Plug not mating condition (2) Plug mating condition Plug side Ground Center conductor For charging block, 3 contacts (B type) 330V Recommended PC board pattern (TOP VIEW) 0.8 1.8±0.05 dia. (Hole) 13.45±0.05 10.5±0.05 4.5±0.05 3.85±0.05 2±0.05 1.3±0.1 1.4±0.1 Terminal No.5 Terminal No.1 Terminal No.10 0.3±0.1 2±0.2 3.85±0.2 4.5±0.2 10.5±0.1 13.45±0.2 15.6 16.6 1.3 4.4 5.4 0.25±0.05 1.9 1±0.1 1.8±0.2 2.1±0.2 (4.4) 0.2±0.05 1.5±0.1 dia. 1.4±0.1 (R) 0.55±0.05 dia. PCB edge position 3.5 1.3 1.4±0.15 1.4 5.9±0.1
7.3 dia. 2. Plug (Cable connection type) Mini-plug for charging, 3 contacts (B type) 0030 4.50 3.85 2.00 - cross section 6.10 5.10 4.10 Range of R0.5 5.60 dia. 6.60 dia. 19.0 18.2 14.6±0.2 13.15 0.08 0.2 5.0 2.5 0.08 14.4 5.4 8.0 18.4 5.6 R 0.2 base R 1.85 9.10 4.35 15.7 18.5 7.30 dia. 2.00 1.10 R 0 base R 0.5 0.50 9.80 Mini-plug for USB connection (B type) 0040 3.85 0.50 - cross section 6.10 5.10 4.10 Range of R0.5 5.60 dia. 6.60 dia. 19.0 18.2 14.6±0.2 13.15 0.08 0.2 5.0 2.5 0.08 14.4 5.4 8.0 18.4 5.6 R 0.2 base R 1.85 9.10 4.35 2.00 1.10 0.50 15.7 18.5 R 0 base R 0.5 9.80
NOTES 1. Being more compact and thinner than its predecessor, the bushing of this product has been molded together with the cable during manufacture. lso, it is constructed so that the cable is not secured by clamps. Therefore, please request the manufacturer where the assembly will take place to make bushings in accordance with the bushing build-in dimensions given on the product use diagram. lso, if the cable is being pulled, please implement a method to secure the cable so that stress is not applied to the soldered parts of the contacts. 2. void stripping the lower hole of the cover surface with a tapping screw. Tighten the screw with a torque of 0.059 N m/0.6 kgf cm or less. For other details, please verify with the product specification sheets.