EAP600
Agenda Product information Key Selling Points Application scenario Product comparison Product feature highlight
Product information Specification briefing Model: EAP600 Description: 11N long range ceiling mount dual band concurrent AP MCU: Atheros AR9344 + AR9382 Memory: 64MB Flash: 16MB WAN: No LAN: 1x 10/100/1000Mbps (support 802.3 af/at PoE) WPS Button: No (SW control) Wireless standard: IEEE 802.11a/b/g/n Multi SSID: Yes (8+8 SSIDs) Hidden SSID: Yes Operation modes: AP/WDS Antenna: 4* internal high gain antenna
Product information Category: Long range access point Model: EAP600 Marketing name: Wireless-N 300Mbps+300Mbps long range ceiling mount dual band concurrent AP Key words: 802.11a/b/g/n, Long range, AP, WDS, 802.3af PoE support, MSSID, VLAN Product introduction The EnGenius EAP600 is a wireless-11n 600Mbps (300Mbps+300Mbps) high power dual band concurrent ceiling mount AP. It allows simultaneous operation of 2.4GHz and 5GHz wireless network. With media-optimized performance, you can enjoy Internet surfing more smoothly and with less lag. Maxima 29dBm high power transmission provides extended coverage in your environment. SSID+VLAN make your data more secure and easy manageable. Standard PoE interoperable with 802.3af makes the Internet connection more flexible. The EAP600 is designed with a slim and white color outlook which will not violate your interior decoration. Only three setup steps make setting the AP up simpler. The EnGenius EAP600 is the perfect choice in small business.
Key Selling Points Dual band concurrent wireless-n configured Up to 300Mbps in both 2.4GHz and 5GHz frequency bands
Key Selling Points 16 SSIDs supported in EAP600 Support 8 SSIDs in 2.4GHz and 8 SSIDs in 5GHz.
Key Selling Points Advanced load balance management-traffic shaping per SSID High power (maximum 26~29dBm) extends coverage, avoids dead spots. Client limitation for each band Administrators are able to set the max. client amount for the web management page. The max. client for each band is 50.
Key Selling Points Band Steering Band Steering steers the 5GHz-compatible clients to 5GHz band by responding only to the 5GHz association requests and not the 2.4GHz requests. It helps to leave more bandwidth for 2.4GHz device operating in 2.4GHz band. Speed rate control This function allows users to set transmission speed rate between AP and clients to guarantee the best Wi-Fi service for end users. Multiple SSID-to-VLAN mapping RADIUS Accounting To help operators to offload 3G to the Wi-Fi seamlessly, RADIUS accounting is supported in EAP600. Data transmission between the mobile devices and RADIUS server is being well encrypted.
Key Selling Points CLI support Full, completed CLI support has been available in the EnGenius EAP600. Multiple mounting types Provide two mounting types for installation. All mounting accessories are included in EAP600 package.
Application scenario Small office Coffee shop Hospitality Classroom
Product comparison EAP150 EAP300 EAP350 EAP600 IEEE standard 802.11b/g/n 802.11b/g/n 802.11b/g/n 802.11a/b/g/n Major chipsets Picture RTL8196C RTL8188RE RTL8196C RTL8192CE AR7242 AR9283 AR9344 AR9283 Tx/Rx 1T1R, 150Mbps 2T2R, 300Mbps 2T2R, 300Mbps 2T2R, 300+300Mbps Mode AP/WDS/Repeater AP/WDS/Repeater AP/WDS/Repeater AP/WDS Antenna 1* Internal high gain antenna 2* Internal high gain antenna 2* Internal high gain antenna 4* Internal high gain antenna Ethernet 10/100 10/100 10/100/1000 10/100/1000 Maximum RF output power 26dBm 29dBm 29dBm 26dBm (2.4GHz) 29dBm (5GHz) SSID 4 4 8 16 PoE support Y Y Y Y WPS N N N N WMM QoS Y Y Y Y
Product feature highlights Operating mode Access Point WDS Security WPA/WPA2/WEP Encryption support 802.1x Authentication support Hidden BSSID L2 Isolation MAC Address filtering (up to 32 fields) Multiple SSID+VLAN supported QoS WMM Supported Management SNMP v1/v2c, MIB I/II Back up/restore setting Remote Firmware upgrade CLI EZ Controller (Free NMS software) Memory capacity 16MB Flash / 64MB RAM Authentication RADIUS Accounting Certification FCC CE IC