MINISTERIO DE AGRICULTURAY PESCA, ALIMENTACIÓN Y MEDIO AMBIENTE DIRECCIÓN GENERAL DE SANIDAD DE LA PRODUCCIÓN AGRARIA SUBDIRECCIÓN GENERAL DE ACUERDOS SANITARIOS Y CONTROL EN FRONTERA NOTA INFORMATIVA 15 de Octubre de 2015 SISTEMA DE REGISTRO DE FABRICANTES EN CHINA AQSIQ ha publicado una nueva norma que afecta al registro de exportadores. Desde 2012, tanto los exportadores como los importadores deben estar registrados en AQSIQ a través de un procedimiento on line. El registro está regulado en el Decreto AQSIQ 145-2012. Se aplica a carnes, huevos y ovoproductos, productos acuáticos y productos acuáticos en conserva, materiales de medicina tradicional china, grasas y aceites vegetales, bebidas no alcohólicas y alcohólicas, azúcar, hortalizas y productos vegetales, frutas secas y nueces, otros alimentos de origen vegetal, alimentos enlatados, productos lácteos, productos apícolas, productos de confitería, frutas en conserva, cigarrillos, té, ingredientes saborizantes, otras frutas procesadas, alimentos para dietas especiales, entre otros. Por el momento, no deben registrarse los exportadores de aditivos alimentarios, frutas frescas, animales vivos, cereales u oleaginosas. A este fin, AQSIQ habilitó un sitio web: http://ire.eciq.cn/ La novedad de esta norma publicada en agosto es que exige también el registro de los FABRICANTES. Este requisito también afecta a aquellos exportadores que sean fabricantes y que ya estén registrados como exportadores, los cuales también DEBEN REGISTRARSE DE NUEVO COMO FABRICANTES. Para ello, pueden utilizar el mismo sitio web ya existente, http://ire.eciq.cn/ Una vez realizado el registro inicial, se asignará a cada exportador / productor un número de registro y ya podrá acceder a la información registrada en la web de AQSIQ a través del siguiente link: http://ire.eciq.cn/. Cualquier cambio en la información proporcionada se modificará directamente a través de este link. ALFONSO XII,62.28014- MADRID TEL: 913474057 FAX: 913474080
El registro será obligatorio a partir del 1 de octubre de 2015. Las listas exportadores, agentes o productores extranjeros de alimentos que han sido registrados serán publicadas y actualizadas regularmente por el departamento de inspección de entrada y salida y cuarentena de China y se podrán consultar online. A continuación se adjuntan los siguientes documentos: - Anexo 1: Manual de instrucciones de registro de exportadores. - Anexo 2: Manual de instrucciones de registro de productores. 2
Registration system for exporters or agents overseas Manual V1.0
1... Error! Marcador no definido. 1.1 IE10... Error! Marcador no definido. 1.2 IE11... 3 2... 6 3... 7 3.1... 7 3.1.1... 7 3.1.2... 7 3.1.3... 8 3.2... 11 3.2.1... 11 3.2.2... 11 3.2.3... 11 3.3... 13 3.3.1... 13 3.3.2... 13 3.3.3... 13 3.4... 16 3.4.1... 16 3.4.2... 16 3.4.3... 16 3.5... 18 3.5.1... 18 3.5.2... 18 3.5.3... 18 4... 19 4.1... 19 4.1.1... 19 4.1.2... 19 4.1.3... 19 5... 20 5.1.1... 20 5.1.2... 20 5.1.3... 21 6... 21 6.1.1... 21 6.1.2... 22 6.1.3... 22 2 22
1 Setup IE browser 的状商的 nte 齿 net 状 xp 首 o 齿 e 齿器接 操 方 暂 度 0 度度 的状度 0 的状度度 Please use IE 6.7.8.9.10 and 11 to access the system, if using IE 10 and 11, the compatible mode of browser should be setup. 1.1 IE10 Setup compatible mode for IE 10 Manner 1: 度 Open the system 必 Click icon of compatible mode which located on the right side of browser address bar Manner 2: 度 Open the system 必 点 lick the icon of tools on the right side of browser 情 的 nte 齿 net 的 nte 齿 net 33 22
Select internet from the pull-down menu, Select security, trusted website website, open the page of trusted website 如 意 的 nte 齿 net - - 44 22
拉 Click add button and to add current website 1.2 IE11 Setup compatible mode for IE11 度 Access the system 必 Click tools icon on the right corner of browser 情 Select compatible setup from pull-down menu, open the page of setup, like below 55 22
意 Click add button, to add the website to compatible. 2 的状接容 0 First, start browser IE 6.0 or the version which higher than 6.0 to login the system 点首除邮须 首 o 钮除 n 66 22
click login to enter the page of Registration system for exporters or agents outside borders. Click initial registration for first time registration, and then fill detailed information of your company. 3 Information recording of overseas exporters or agents 3.1 Initial registration 3.1.1 3.1.2 77 22
3.1.3 的状接容 0 First, start browser IE 6.0 or the version which higher than 6.0 to login the system 88 22
fill detailed information of establishment, Click agree ( ), and then click temp save ( ), the information can be saved temporary, it can be submitted next time, or committed immediately. Then the information of overseas exporters or agents can be found and check. Click here to confirm the information which filled are correct, and then the record number and query number will be displayed. 如 容 attention 度 钮骤 a 除首 长 ot 骤 a 除首 The email address of contact person should be remembered, in order to find back the query number in the future. When you fill the email address, the Gmail and Hotmail cannot use. 99 22
必 如 The record number and query number should be recorded, in order to login the system of exporter and agent. 情 For initial registration, if you click temporary save ( ), you could fill record number, query number and extra code in the system for exporter and agent, and click initial registration ( ) to login. 意 For initial registration, if you click commit ( ), you could fill record number, query number and extra code on the screen of the system of exporter and agent, and click login ( ) to login. After you login, the record information and record progress can be checked, the record number can be maintained. 5 Please read the letter of commitment before tempo save and commit, and then click agree ( ), then the data can be temporary save or 1010 22
committed. 3.2 submit changes 3.2.1 3.2.2 3.2.3 度 必 情 意 的状接容 0 First, start browser IE 6.0 or the version which higher than 6.0 to login the system Click login to enter the page of Registration system for exporters or agents outside borders. 1111 22
Third, Fill the record number, query number and extra code, and click login ( ) Reminder, if the status of company is tempo save of record information and it is first time registration, then click initial registration ( ) to login in the system. 局 1212 22
Fourth, the information can be changed in above page (if the status is not temporary save, the company name, address and country/region can be changed), click agree button to agree the letter of commitment, and then click submit. The reminder company record application submitted successful, and waiting for approval will pop-up. It the application of changes had been submitted under the status of temporary save, the status of record information will be changed as: record application, to be audited. If in other situation, the status of record application will be changed as: record changes, to be audited. 3.3 Cancel record 3.3.1 3.3.2 3.3.3 度 必 1313 22
情 意 的状接容 0 First, start browser IE 6.0 or the version which higher than 6.0 to login the system Second, login the system Fill the record number, query number and extra code, and click login, to enter the record information maintenance page. 1414 22
And click cancel record, the reminder will be as following: Click confirm ( ), and waiting for the verification of cancel record. 1515 22
3.4 Information progress query 3.4.1 3.4.2 3.4.3 的状接容 0 start the browser IE 6.0 or the version which higher than 6.0 to login the system click the login on the page of oversea exporter or agent. Input the record number, query number and extra code, and click login, entering the maintenance page of record information, and click information progress query, then you could see all steps about submit record information. The record status is displayed as the current state, such as the record release: the audit has been approved and released. 1616 22
all record status can reference as following: record temporary save, to be submitted record submission, to be treated record application, to be audited audit didn t pass, to be modified approval, to be released approval, has been published checks didn t pass, to be modified record change, to be audited record delete, to be archived record cancel application, to be audited record application delete, to be archived ;record changes temporary save, to be submitted record changes submit, to be treated 1717 22
3.5 Management of query number 3.5.1 3.5.2 3.5.3 的状接容 0 Start browser IE 6.0 or the version which higher than 6.0 to login the system click the login on Registration system for exporter and agents overseas. Input the record number, query number and extra number, and click login, entering the maintenance page of record information, and click query number maintenance, input correct previous query number, and new query number, and click finish the changes of query number. requirements for modify query no. the original query no must be correct 6 the new query number must be longer than 6 the new query number can t be same with 1818 22
original query number input two times new query number, two times input must be same. 4 Information record check 4.1 4.1.1 4.1.2 4.1.3 - open the system, open the record list query, the list of registered exporters or agents can be found as following: 1919 22
( ) / 5 Find back inquiry number 5.1.1 5.1.2 2020 22
5.1.3 的状接容 0 Start browser IE 6.0 or the version which higher than 6.0 to login the system click the login on Registration system for exporter and agents overseas. Click find back query no. 局 商联 u 邮邮 essfu 首首 y 齿 e 邮 ove 齿 t 长 e que 齿 y 邮 ode 除 nfo 齿骤 at 除 on 器 Input record number, country/region and click ok, it will be reminder (Successfully recover the query code information) The query code also can be found back by email which filled in initial registration. 6 Consultation 6.1.1 局 2121 22
6.1.2 6.1.3 局 For the initial registration, if the system remind that the company name, country/region which you filled are already exist, below page will pop-up Click confirm button, below page will pop-up. Fill consult information in above page, and click submit, the consultation information can be found in the page of consultation management in the system. 2222 22
Information recording system for manufacturer overseas Manual V1.0
1... 3 1.1 IE10... 3 1.2 IE11... 5 2... 3 3... 8 3.1... 8 3.1.1... Error! Marcador no definido. 3.1.2... Error! Marcador no definido. 3.1.3... Error! Marcador no definido. 3.2... 11 3.2.1... 11 3.2.2... 11 3.2.3... 11 3.3... 13 3.3.1... 13 3.3.2... 13 3.3.3... 13 3.4... 15 3.4.1... 15 3.4.2... 15 3.4.3... 15 3.5... 17 3.5.1... 17 3.5.2... 17 3.5.3... 17 4... 18 4.1... 18 4.1.1... 18 4.1.2... 18 4.1.3... 18 5... 19 5.1.1... 19 5.1.2... 19 5.1.3... 19 6... 20 6.1.1... 20 6.1.2... 20 6.1.3... 20 2 21
1 Setup IE browser 的状商的 nte 齿 net 状 xp 首 o 齿 e 齿器接 操 方 暂 度 0 度度 的状度 0 的状度度 Please use IE 6.7.8.9.10 and 11 to access the system, if using IE 10 and 11, the compatible mode of browser should be setup. 1.1 IE10 Setup compatible mode for IE 10 Manner 1: 度 Open the system 必 Click icon of compatible mode which located on the right side of browser address bar of browser Manner 2: 度 Open the system 必 点 lick the icon of tools on the right side of browser 情 的 nte 齿 net 的 nte 齿 net 3 21
Select internet from the pull-down menu, Select security, trusted website website, open the page of trusted website 如 意 的 nte 齿 net - -
拉 Click add button and to add current website 1.2 IE11 Setup compatible mode for IE11 度 Access the system 必 Click tools icon on the right corner of browser 情 Select compatible setup from pull-down menu, open the page of setup, like below
意 Click add button, to add the website into compatible. 2 3 system 的状接容 0 First, start browser IE 6.0 or the version which higher than 6.0 to login the 点首除邮须首 o 钮除 n
click login to enter the page of information recording system for manufacturer overseas Click initial registration for first time registration, and then fill detailed information of your company.
4 Information recording 4.1 Initial registration fill detailed information of establishment 4 - Regarding section 4 information of submitter, the type of submitter should be selected. If the submitter is domestic importer, the record number of domestic 8 21
importer and the record number in this system should be filled. Click agree of the letter of commitment ( ), and then click temp save ( ), the information can be saved temporary, it can be submitted next time, or committed immediately. Then the information of oversea manufacture can be found and check. Click here to confirm the information which filled are correct, and then the record number and query number will be displayed. 如 容 attention 度 钮骤 a 除首 长 ot 骤 a 除首
The email address of contact person should be remembered, in order to find back the query number in the future. When you fill the email address, the Gmail and Hotmail cannot be used. 必 如 The record number and query number should be recorded, in order to login the Registration system for exporter or agents overseas. 情 For initial registration, if you click temporary save ( ), you could fill record number, query number and extra code in the system for exporter and agent, and click initial registration ( ) to login. 意 For initial registration, if you click commit ( ), you could fill record number, query number and extra code on the screen of the system of exporter and agent, and click login ( ) to login. After you login, the record information and record progress can be checked, the record number can be maintained. 5 Please read the letter of commitment before tempo save and commit, and then click agree ( ), then the data can be temporary save or 1010 21
committed. 4.2 submit changes 4.2.1 4.2.2 4.2.3 度 必 情 意 的状接容 0 First, start browser IE 6.0 or the version which higher than 6.0 to login the system Second, click the login and enter the Registration recording system for oversea manufacturer, 1111 21
Third, Fill the record number, query number and extra code, and click login ( ) Reminder, if the status of company is temporary save of record information and it is first time registration, then click initial registration ( ) to login in the system. 局 12 21
Fourth, the information can be changed in above page (if the status is not temporary save, the company name, address and country/region cannot be changed), click agree button to agree the letter of commitment, and then click submit. The reminder company record application submitted successful, and waiting for approval will pop-up. If the application of changes had been submitted under the status of temporary save, the status of record information will be changed as: record application, to be audited. If in other situation, the status of record application will be changed as: record changes, to be audited. 4.3 Cancel record 4.3.1 4.3.2 4.3.3 度 必 情 意 1313 21
的状接容 0 First, start browser IE 6.0 or the version which higher than 6.0 to login the system Second, login the system Fill the record number, query number and extra code, and click login, to enter the record information maintenance page. 1414 21
And click cancel record, the reminder will be as following: Click confirm ( ), and waiting for the verification of cancel record. 4.4 Information progress query 4.4.1 function description 4.4.2 4.4.3 Operating steps 的状接容 0 start the browser IE 6.0 or the version which higher than 6.0 to login the system click the login on the page of oversea exporter or agent. Input the record number, query number and extra code, and click login, entering the maintenance page of record information, and click 1515 21
information progress query, then you could see all steps about submit record information. The record status is displayed as the current state, such as the record release: the audit has been approved and released. all record status can be referenced as following: record temporary save, to be submitted record submission, to be treated record application, to be audited audit didn t pass, to be modified approval, to be released approval, has been published checks didn t pass, to be modified record change, to be audited record delete, to be archived record cancel application, to be audited record application delete, to be archived ;record changes temporary save, to be submitted record changes submit, to be treated 1616 21
4.5 Management of query number 4.5.1 4.5.2 4.5.3 的状接容 0 Start browser IE 6.0 or the version which higher than 6.0 to login the system click the login and enter the Information recording system for manufacturer overseas. Input the record number, query number and extra number, and click login, entering the maintenance page of record information, and click query number maintenance, input correct previous query number, and new query number, and click finish the changes of query number. requirements for modify query no. the original query no must be correct 6 the new query number must be longer than 6 the new query number can t be same with original query number input two times new query number, two 1717 21
times input must be same. 5 Information record check 5.1 5.1.1 5.1.2 5.1.3 Operating procedure - - open the system, open the record list query, the list of registered companies can be found as following: 1818 21
( ) / 6 Find back inquiry number 6.1.1 6.1.2 6.1.3 的状接容 0 Start browser IE 6.0 or the version which higher than 6.0 to login the system click the login and enter the Information recording system for manufacturer overseas. Click the button of find back query no. 1919 21
局 商联 u 邮邮 essfu 首首 y 齿 e 邮 ove 齿 t 长 e que 齿 y 邮 ode 除 nfo 齿骤 at 除 on 器 Input record number, country/region and click ok, it will be reminder (Successfully recover the query code information) The record number and query code also can be found back by email which filled during initial registration. 7 Consultation 7.1.1 局 7.1.2 7.1.3 Operating process 局 For the initial registration, if the system remind that the company name, country/region which you filled are already exist, click confirm button and below page will pop-up 2020 21
Click confirm button, below page will pop-up. Fill consult information in above page, and click submit, the consultation information can be found in the page of consultation management in the system. 2121 21