Swift is a way on future splicers. - - Be one o e ex n V- oove on e 2014-01-29 www.gigacom.no Page 1 of 5
Arc Fusion Splicers l US Patent 11/912,109 Built-in Power Meter and Fault Locator ( PCT/KR2013/001243 ) - performance (option) Fusion Splicers Resistance to Shock, Dust and Water - The splicer with high reliability has stable performance even in a harsh environment - Shock Free Fall : 76cm from 5 sides - Waterproof : IPx2 - Dustproof : IP5x Compatible with Fusion Splice-On Connector (SOC) in accordance with the Industrial Standard Connector ILSINTECH 08_09 2014-01-29 www.gigacom.no Page 2 of 5
Perfect Solution with Swift and Swift Connector Swift Connector Assembly Sequence - Strip, Clean, Cleave, Splice and Sleeve : (Swift Fusion Splicer) Ferrule Fiber Strip Fiber Clean & Cleave Main Fiber Strip, Clean & Cleave Splice Heating Sleeve Subassembly Boot Assembly Complete Assembly 2014-01-29 www.gigacom.no Page 3 of 5
Work Table Arc Fusion Splicers l PCT/KR2013/001243 Fusion Splicers Chest harness (Work Table) SPECIFICATIONS - Power Meter Power range (dbm) 10 to -55 Calibrated wavelengths (nm) 850, 980, 1300, 1310, 1450, 1490, 1550, 1590, 1625 Power uncertainty (db) 5% Resolution (db) 0.01 Tone detection (Hz) 270, 300, 1k, 2k Display unit db/dbm/w Warm-up time (sec) 0 Optical adapter type SC (Standard) FC, ST (Optional) Firmware upgrade Enable Operating temperature -10 C to 50 C Storage temperature -40 C to 70 C Relative humidity 0% to 95% non-condensing SPECIFICATIONS - Fault Locator Laser source Class 3b laser diode Laser wavelengths (nm) 650nm (nominal) Fiber compatibility SM and MM Output port Universal adapter for connectors with 2.5mm ferrules Output mode CW or ashing(2 3 Hz) Output power 10mW into single mode ber Operating temperature -10 C to 50 C Storage temperature -40 C to 70 C Relative humidity 0% to 95% non-condensing ILSINTECH 10_11 2014-01-29 www.gigacom.no Page 4 of 5
SPECIFICATIONS Fiber alignment Applicable type of bers Fiber count Applicable ber dimensions Fiber setting and cleaved length Fixed V-Groove(Clad to Clad) 0.25mm, 0.9mm, 2.0mm, 3.0mm, Indoor cable Single ber Cladding diameter: 125, Coating diameter: 250, 900 7.0mm Splicing modes Splice mode: 100, Heater mode: 50 Typical Splice Loss Return loss Splicing time Splice loss estimate Sleeve heating time Applicable protection sleeve Storage of splice result SM: 0.04dB, MM: 0.02dB, DS: 0.06dB, NZDS: 0.06dB > 60dB Typical 7sec Available 15sec(0.9mm ber), 70sec(indoor, 3.0mm cable) 60mm, 40mm, 28mm, 32mm The last 2,000 results to be stored in the internal memory. Tension test 1.96N Operating condition Altitude: 0~5,000m above sea level, Temperature: -10 ~50 Humidity: 0~95%, Wind: 15m/s, non-condensing Storage condition Temperature: -40 ~80, Humidity: 0~95% Dimension 136(W) 203(L) 86(H)mm Weight 1.2kg(Including battery 1.5kg) Viewing method and display Two CMOS cameras and 3.5-inch color LCD monitor Fiber view and magni cation X/Y : 170X/190X Power supply DC Lithium polymer battery(dc 14.8V, 1650mAh 2), 100 240V AC Adapter No. of splice cycles with battery Typical 120 cycles (0.9mm ber) Electrode life More than 2,500 times Terminals USB STANDARD PACKAGE Model Q ty Arc Fusion Splicer 1 AC Adapter -1 1 Battery Charger -2 1 Spare Electrode EI-19 1 pair Battery Pack -B 2 Cooling Tray CT-01 1 Sleeving Clamp SC-01 1 Holder HF-X 1 pair Tool Box 1 User Guide CD 1 Carrying Case Hard Case 1 OPTION PACKAGE Battery Pack Cleaver Blade DC Adapter Electrode Fiber Holder S09-C S09 Sleeve S30-C S30 Working Table SOC Connector Carrying Case Model -B BI-05 ISFB-02 EI-19 HF-250, HF-900, HF-2.5, HF-IN HF-SC, HF-FC, HF-LC, HF-ST, LF-900 0.9mm Connector, 1.02.328mm 0.9mm Cable, 1.02.345(60)mm 3.0mm. Indoor Connector, 3.54.032mm 3.0mm. Indoor Connector, 3.54.045(60)mm WK-01(Bag type) SC, LC, FC, ST (Refer to FTTx Solution catalogue) Soft Case 2014-01-29 www.gigacom.no Page 5 of 5