VIPER Quick User Guide 1
2 Please read this manual thoroughly before use and keep it handy for future reference.
Contents 1. Overview... 1 1.1 DVR Description... 1 1.2 DVR power up... 1 1.2.1 Login... 1 2. Live Screen Configuration 2 2.1 Icons in Live screen... 3 2.2 Live Launcher menu... 4 2.3 Quick menu... 5 2.4 Camera selection... 6 2.5 PTZ camera control... 7 3. Search/Playback 8 3.1 Search... 8 3.2 Playback... 9 3.3 Backup ( Archive)... 10 3
1. Overview 1.1 DVR Description 2 1 3 4 No. Name Function 1 Power status LED Power indication ON/OFF 2 Recording status LED Status of recording 3 Network LED Illuminated if Network connected 4 USB port USB port is connected for USB mouse or firmware upgrade, and data back-up. 1.2 DVR power up When the NVR is powered up, it will take a couple of minutes to boot, the following icons will be displayed in order as it goes through it s booting cycle When the boot up process is completed a buzzer will sound and the start up screen will be displayed. 1.2.1 Login In Log in screen, enter the ID, Password and press OK. Note Default ID & Password is admin/admin VIPER Quick userguide V1.0 1
2. Live Screen Configuration No. Item Description 1 Set up menu Setting menu is located at the top of the screen (Admin only) 2 Live screen Shows live video of connected cameras. 3 Launcher menu Launcher menu is located at the bottom of the screen. 4 Quick menu Clicking the right button of a mouse displays Quick menu. VIPER Quick userguide V1.0 2
2.1 Icons in Live screen Each icon in the live screen displays a present setting status or a function. UI screen consists of like below. Note Chosen live screen is marked as a blue frame; mouse-located live screen is marked as yellow one. No. Icon Description 1 CH1 CAM1 Channel numbers and camera titles 2 A camera with PTZ function PTZ control function in process Recording in alarm event mode Recording in motion event mode Recording in panic recording mode Recording in consecutive recording mode 3 Video loss icon 4 Mic ON/OFF Speaker ON/OFF 6 Displaying present time and date VIPER Quick userguide V1.0 3
2.2 Live Launcher menu This section describes Launcher menu in the bottom of the screen. Figure 2-1 Launcher menu Table 2-1 Launcher menu Item and Description No. Item Description 1 Log in/out status and logged in ID 2 Date & Time Displaying present date and time 3 HDD Displaying HDD capacity in use 4 Moving to previous/next partition screen 5 Displaying live screen in order set (toggle) 6 Selecting partition mode to mark in live screen (single screen, 4-, 9-, and 16- partition) 7 Stopping or replaying selected live screen images (toggle) 8 Audio on or mute chosen live screen(toggle) 9 Capturing channels users want 10 Bookmarking with date and time users want 11 Make a backup video of users want. 12 Searching recording data (time, event, and thumbnail). 13 Playing recorded data 14 Starting immediate recording of selected channel 15 Locking or releasing launcher menu (toggle) VIPER Quick userguide V1.0 4
2.3 Quick menu This section depicts Quick menu when users click the right button of the mouse in live screen. No. Item Description 1 Screen Mode Selecting the partition mode of live screen (Full, 2X2, 3X3, and 4x4). 2 Zoom in Magnifying selected live screen (Zoom out, 2 times, 4 times, and 8 times). 3 Freeze Stopping or replaying selected live screen images (toggle) 4 Speaker OUTPUT/Mute Turning on/off a sound speaker 5 PTZ Control Controlling PTZ Function 6 Stop Alarm Stopping monitoring alarm output and event 7 Spot Mode Set the output mode of a spot monitor (Auto, Full, and 4x4). 8 Playback Playing selected live screen images (before 30 sec, 1 min, 5 min, 10 min, 30 min, 1-hour, Go to last play time, and Go to last record time) 9 Search Searching recording data (time, event, thumbnail, and text). 10 Backup Backup video users want. 11 Setup Opening setting menu pop-up. For more information about setting menu, see section 0 Camera selection Individual cameras or multi screen modes can easily be selected using the Mouse. 1. Selecting a single camera from a multi screen display To select a single camera from any multi-screen view, simple hover the mouse over the required camera and double click on it s image. This will display the selected camera in full screen view. To return to the same multi-screen view, double click on the full screen image. VIPER Quick userguide V1.0 5
2. Automatic sequencing of cameras To start an automatic sequence of camera images. 12 Status Opening a pop-up displays device system log, event, and recording status (system log, event, and save) 13 Log in/log out Log in/log out 14 Shutdown Unplugging or restarting the device (shutdown, restart). VIPER Quick userguide V1.0 6
2.4 Camera selection Individual cameras or multi screen modes can easily be selected using the Mouse. 1. Selecting a single camera from a multi screen display To select a single camera from any multi-screen view, simple hover the mouse over the required camera and double click on it s image. This will display the selected camera in full screen view. To return to the same multi-screen view, double click on the full screen image. 2. Automatic sequencing of cameras To start an automatic sequence of camera images, select the sequence icon on the Launcher menu at the bottom of the screen: 3. Selecting different multi-screen views To select different multi-screen viewing options select the screen icon on the Launcher menu at the bottom of the screen: 4. Manual stepping through cameras or multi screen views To manually select different cameras or multi-screen views select the left or right arrows on the Launcher menu at the bottom of the screen: VIPER Quick userguide V1.0 7
2.5 PTZ camera control PTZ cameras cam be controlled when selected in full screen mode. To access the PTZ OSD menu, first select the camera full screen, then right click anywhere on the screen to display the Quick Menu: Selecting the PTZ control option will diplsay a PTZ control panel and the PTZ icon in the center of the screen: The camera can be moved by either: 1. Pressing and holding on an arrow. or 2. Click on the screen and drag (the further from the icon the faster the speed) Use the mouse scroll wheel to zoom in or out. Presets / Tours etc To select Preset positions or Tours right clicking anywhere on the screen will display the following menu: Selecting any option will display drop down menu. VIPER Quick userguide V1.0 8
3. Search/Playback This chapter describes Live Launcher search and play menu located at the bottom of the screen. Figure 3-1 Live Launcher Search, Play menu Table 3-1 Item and Description of Live Launcher Search, Play menu No. Item Description 1 Searching recording data (time, event, and thumbnail). 2 Playing recorded data go direct to playback mode. 3.1 Search This function allows searching of recorded data via various methods: Time, Event, Thumbnail, Smart Search and Text. Figure 3-2 Search: Time Table 3-2 Search: Time Item and Description No. Item Description 1 Calendar Select the date to be searched 2 Time Set the time to be viewed 3 Bookmark Select any pre-defined bookmarks 4 Timeline Displays the timelines across channels 5 Preview Previewing video clips searched 6 Play Playing video clips. For more information about Live bar, see section 0 Playback. 7 Cancel Exit the search screen Note: For more detail on more advanced searching options please refer to the main manual supplied on the CD. VIPER Quick userguide V1.0 9
3.2 Playback To play recorded data Figure 3-3 Playback Launcher Table 3-3 Playback Launcher Item and Description No. Item Description 1 Play forward 2 Date and Time Displaying date and time of video being played 3 Moving to the first section of the video 4 Playing the videos with multiplied speed in reverse (2~64x). 5 Playing the videos with lower speed in reverse (1/2~1/8x). 6 Play and Pause (toggle). 7 Play forward at slow speeds (1/2~1/8x). 8 Fast forward (2~64x). 9 Moving to previous/next channel or multi screen 10 Selecting the partition mode to mark in the screen 11 Searching the recorded data (time, event, and thumbnail). For more information about search, see section 3.1 Search. 12 Go to Live mode 13 Opening or closing the record timelines 14 Activating/deactivating automatic hidden function of Launcher menu VIPER Quick userguide V1.0 10
3.3 Backup ( Archive) To back up information to A USB pen (or CD/DVD on HDAL model), right click on the screen to display the quick menu. Select the BVACK up option: This will display the following menu page: 1. Plug in a USB pen to the recorder, when it is discovered it will be displayed in the Device window 2. Select the required channels 3. Select the Start and Stop time 4. Give the download folder a logical name 5. Select H4V as back up format to download player software. 6. Click calculate to ensure the time period will fit on the pen 7. Click Start VIPER Quick userguide V1.0 11
VIPER Quick userguide V1.0 12