Blackbird 4K Pro HDBaseT Extender Kit P/N 31059 User's Manual
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. This device is intended for indoor use only. Do not expose this device to water or moisture of any kind. Do not place drinks or other containers with moisture on or near the device. If moisture does get in or on the device, immediately unplug it from the power outlet and allow it to fully dry before reapplying power. Do not expose this device to excessively high temperatures. Do not place it in, on, or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it in direct sunlight. Do not place or install this device in an area where it can be exposed to excessive amounts of dust, humidity, oil, smoke, or combustible vapors. Prior to operation, check the unit and power cord for physical damage. Do not use if physical damage has occurred. Before plugging the unit into a power outlet, ensure that the outlet provides the same type and level of power required by the device. Never unplug the unit by pulling on the power cord. Always grasp the connector head or adapter body. Ensure that power is turned off and disconnected before making any electrical connections. Take care to prevent damage to the power cord. Do not allow it to become crimped, pinched, walked on, or become tangled with other cords. Ensure that the power cord does not present a tripping hazard. Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For stubborn deposits, moisten the cloth with warm water. This device has no user serviceable parts. Do not attempt to open, service, or modify this device. 2
INTRODUCTION This Blackbird 4K Pro HDBaseT Extender Kit is an ideal solution for extending HDMI video signals over long distances. It can extend a 4K@60Hz 4:2:0 signal to distances up to 230 feet (70 meters) or a 1080p@60Hz signal to distances up to 328 feet (100 meters) over a single Cat6 Ethernet cable. It delivers 10.2 Gbps bandwidth and supports bi-directional IR and RS-232 signal pass-through. It also supports the Power over Cable (PoC) feature, which allows either unit to obtain power over the Ethernet cable from the other unit. It is compliant with the HDMI 1.4 and HDCP 2.2 specifications. FEATURES Extends 4K@60Hz 4:2:0 HDMI signals to distances up to 230 feet (70 meters) over a single Cat6 Ethernet cable Extends 1080p@60Hz HDMI signals to distances up to 328 feet (100 meters) over a single Cat6 Ethernet cable Supports bi-directional IR and RS-232 pass-through extension Supports bi-directional Power over Cable (PoC) for simplified wiring Compliant with the HDMI 1.4 and HDCP 2.2 specifications CUSTOMER SERVICE The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to none. If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am- 6pm PT) or via email at support@monoprice.com 3
PACKAGE CONTENTS Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement. 1x HDBaseT transmitter 1x HDBaseT receiver 4x Mounting brackets 4x Screws 8x Plastic feet 2x 3-pin Euroblock connectors 1x AC power adapter (12 VDC, 1A) 1x User's manual PRODUCT OVERVIEW Transmitter 1. HDMI IN: HDMI port for connecting the video source device. 2. IR IN: 3.5mm jack for connecting an IR receiver (not included). 3. IT OUT: 3.5mm jack for connecting an IR transmitter (not included). 4. RS-232: 3-pin Euroblock connector for connecting to a computer for pass-through RS-232 signals or to update the transmitter. 5. DC 12V: DC barrel connector for connecting the included AC power adapter. 4
6. POWER LED: The LED illuminates red when power is applied. 7. HDBT OUT: RJ45 connector for connecting a Cat6 Ethernet cable to connect with the receiver. 8. CTRL/UPDATE: Switch to determine the behavior of the RS-232 connection. When in the CTRL position, the transmitter will pass RS-232 signals on to the receiver for control of a connected device. When in the UPDATE position, you can update the Valens IC program by connecting to a PC and running a batch file. Receiver 1. HDMI OUT: HDMI port for connecting an HDMI display. 2. IR IN: 3.5mm jack for connecting an IR receiver (not included). 3. IT OUT: 3.5mm jack for connecting an IR transmitter (not included). 4. RS-232: 3-pin Euroblock connector for connecting to a computer for pass-through RS-232 signals or to update the transmitter. 5. DC 12V: DC barrel connector for connecting the included AC power adapter. 6. POWER LED: The LED illuminates red when power is applied. 7. HDBT IN: RJ45 connector for connecting a Cat6 Ethernet cable to connect with the transmitter. 8. CTRL/UPDATE: Switch to determine the behavior of the RS-232 connection. When in the CTRL position, the transmitter will pass RS-232 signals on to the transmitter for control of a connected device. When in the UPDATE position, you can update the Valens IC program by connecting to a PC and running a batch file. 5
SAMPLE CONNECTION DIAGRAM TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. Technical support is available through the online chat button on our website www.monoprice.com during regular business hours, 7 days a week. You can also get assistance through email by sending a message to tech@monoprice.com 6
SPECIFICATIONS Model 31059 Maximum Resolution 4K@60Hz 4:2:0 Bandwidth 10.2 Gbps HDMI Version 1.4 HDCP Version 2.2 Transmission Method Transmission Distance Control Pass-Through Input Power AC Adapter Input Power Maximum Power Consumption Operating Temperature Relative Humidity Dimensions (each) HDBaseT 4K@60Hz: up to 230 feet (70 meters) 1080p@60Hz: up to 328 feet (100 meters) Bi-directional IR and RS-232 12 VDC, 1A or Power over Cable (PoC) 100 ~ 240 VAC, 50/60 Hz 10 watts +14 ~ +122 F (-10 ~ +50 C) 0 ~ 90% RH, non-condensing 4.7" x 2.9" x 0.6" (120 x 74 x 16 mm) Weight (each) 8.5 oz. (240 g) Blackbird is a trademark of Monoprice Inc. HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Blu-ray Disc and Blu-ray are trademarks of the Blu-ray Disc Association. 7