CS-HHP Compact Inline Surge Protector Operation Manual
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document. Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice. COPYRIGHT NOTICE No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means electronic, mechanical, magnetic, optical, chemical, manual, or otherwise without express written permission and consent from Cypress Technology. Copyright 2011 by Cypress Technology. All Rights Reserved. Version 1.0 July 2016 TRADEMARK ACKNOWLEDGMENTS All products or service names mentioned in this document may be trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. Never spill liquid of any kind on or into this product. Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit. Do not attach the power supply cabling to building surfaces. Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged. Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it. To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit. REVISION HISTORY VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE RDV1 10/07/16 Preliminary Release
CONTENTS 1. Introduction... 1 2. Applications... 1 3. Package Contents... 1 4. System Requirements... 1 5. Features... 2 6. Operation Controls and Functions... 3 7. Connection Diagram... 4 8. Specifications... 5 9. Support Timing Table & HDMI Cable Length.. 6 9.1 Support Timing Table... 6 9.2 HDMI Cable Length... 6
1. INTRODUCTION The voltage spikes may happen sometimes which is not under our expectation. This compact surge protector designs to protect connected source and sink devices for blocking or shorting to ground any unforeseen voltage spikes. This surge protector is compact design and come with general HDMI input and output interface which can fit most of electronic devices covers from displays to DVD players in the market. 2. APPLICATIONS Entertainment Room & Home Theater Show Room & Demo Room Lecture Room & Hall Presentation Public Commercial Display 3. PACKAGE CONTENTS 1 x Surge protector unit 1 x Operation Manual 4. SYSTEM REQUIREMENTS Input source equipment such as PS3/Blu-ray player and output UHD TV or display or connects between matrix/scaler and displays/projector 1
5. FEATURES HDCP 1.4 and 2.2 content pass through Compact design with HDMI input and output interface to fit most of electronic devices Maximum supported pass through resolution up to 3840x2160@24/25 and 30 3D contents pass through supported LPCM, Dolby and DTS audio formats pass through supported CEC pass thought supported Easily installation only connects it between source and sink devices 5V overvoltage protection circuit design to prevent higher voltage damaged devices 2
6. OPERATION CONTROLS AND FUNCTIONS HDMI OUT HDMI IN HDMI SURGE PROTECTOR 1 2 1 HDMI OUT Connects with displays or projector. 2 HDMI IN Connects the source equipment such as DVD player or matrix / scaler unit. 3
7. CONNECTION DIAGRAM Display HDMI Cable HDMI OUT HDMI IN HDMI SURGE PROTECTOR HDMI Cable DVD player 4
8. SPECIFICATIONS Input Ports 1 x HDMI Output Ports 1 x HDMI Over voltage protection 5V Supported Resolution 480 i to 4K2K YUV 4:2:0 Supported audio formats LPCM, Dolby, DTS Support audio sampling 32kHz ~ 192kHz rate EDID Bypass Audio Return Channel Bypass 3D content Bypass CEC Bypass Deep color 8 bit, 10 bit and 12 bit HDMI transmission distance 5 meter for HDMI Input and output (3840 x 2160) ESD ±15kV (Air) / ±8kV (Contact) Chassis Material Plastic Chassis Color Black Weight 56g Dimensions 482mm(W) x 354mm(D) x 96mm(H) 5
9. SUPPORT TIMING TABLE & HDMI CABLE LENGTH 9.1 Support Timing Table HDMI IN & OUT RESOLUTION 480i 576i 480p 576p 640x480 800x600 1080i @50&60 1080p@50&60 1024x768 1360x768 1280x1024 1600x1200 1920x1200 3840x2160p@24&25&30 3840x2160p@60(YUV420) 4096x2160p@24 4096x2160p@50 & 60(YUV420) SUPPORTED 9.2 HDMI Cable Length HDMI CABLE LENGTH (MAX) Resolution Input Output 3840x2160p 5m 5m 6
CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.tw MPM-CSHHP