ELS-01/ELS-01C/ELS-01X (type U) Version 1.85 and 1.90 New Functions

Similar documents
Smart Device Connection Manual for Android

iphone/ipad Connection Manual

Click on Close button to close Network Connection Details. You are back to the Local Area Connection Status window.

Wi-Fi Settings Guide. Infrastructure Mode

How to manually set up EW-7228APn to extender wireless range

WNAP 3G MOBILE ROUTER. Quick Installation Guide

EOS 6D (WG) Wi-Fi Function Instruction Manual INSTRUCTION MANUAL

Network Guide NPD EN

Premiertek AP Mbps Wireless-N Broadband Router Quick Installation Guide

WIRELESS 150N USB 2.0 ADAPTER

NW611. AC600 WiFi Dual Band USB Adapter with 5dBi Antenna

Yealink T46S Wireless Settings

WF-2402 Quick Installation Guide

WIRELESS 150N USB 2.0 ADAPTER

EOS 70D (W) Wi-Fi Function Instruction Manual INSTRUCTION MANUAL

Configuring the WT-4 for Upload to a Computer (Ad-hoc Mode)

The SC receives a public IP address from the DHCP client of the ISP. All traffic is automatically sent out through the WAN interface.

Network Name displays the name of the wireless network your machine is connected to (this says network name when not connected to a network).

NETWORK USER S GUIDE. Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Ethernet Multi-function Print Server

Nano USB Wireless Adapter RNX-AC600NUB. User Manual

Yealink T41S Wireless Settings

High Gain USB Wireless Adapter RNX-AC600HGUBE. User Manual

A Division of Cisco Systems, Inc. GHz 2, g. Wireless-G. User Guide. Access Point WIRELESS WAP54G (EU/LA/UK) Model No.

Installing driver over the network

Owner s Manual. Network Player

Configuring the WT-4 for ftp (Infrastructure Mode)

Wireless DCP. Owner s Manual. Introduction

PRIMARE APP User Guide ios

Internet Connection Guide

4 Enter an IP address and sub-net mask for the ftp server and. 5 Go to the [System and Maintenance] > [Administrative Tools]

N900 Wireless Dual Band Gigabit Router

Figure 5-25: Setup Wizard s Safe Surfing Screen

Yealink T48S Wireless Settings

Wi-Fi 300N USER MANUAL. Nano USB Adapter HNWU300NN.

Wireless USB 600AC USER MANUAL. Dual Band USB Adapter. HNW600ACU Rev

WAP3205 v2. User s Guide. Quick Start Guide. Wireless N300 Access Point. Default Login Details. Version 1.00 Edition 2, 12/2012

Lesson 10. Circuit Boards and Devices Ethernet and Wi-Wi Connectivity with the Internet

A Division of Cisco Systems, Inc. GHz g. Wireless-G. Access Point. User Guide WIRELESS. WAP54G ver Model No.

802.11ac Wireless Access Point Model WAC104

iphone/ipad Connection Manual

Wireless LAN Connection Guide

The FSC receives a public IP address from the DHCP client of the ISP. All traffic is automatically sent out through the WAN interface.

DG-HR1160M Portable Power Bank 3G Router User Manual

Chapter 4 Advanced Settings and Features

Configuring Settings on the Cisco Unified Wireless IP Phone 7921G

UlifeCam (U5820Y, GD2810, U5880/1Y) Installation Guide

Configuring the WT-4 for ftp (Infrastructure Mode)

Configuring the WT-4 for ftp (Ad-hoc Mode)

Configuring Settings on the Cisco Unified Wireless IP Phone

WLAN Connection Manual SPP-R410. Mobile Printer Rev

AirCruiser G Wireless Router GN-BR01G

A Division of Cisco Systems, Inc. GHz g. Wireless-G. USB Network Adapter. User Guide WIRELESS WUSB54G. Model No.

WIRELESS ROUTER N150. User Manual. F9K1009v1 8820zb01125 Rev.B00

Quick Setup Guide. for Standalone Omada Access Points. EAP110 / EAP115 / EAP225 / EAP245 / EAP320 / EAP330 / EAP115-Wall

Wireless N USB Adapter. User Guide

User Manual DIR-850L. Wireless AC1200 Dual Band Gigabit Router.

NCR. Wi-Fi Setup Assistant. User guide

Grandstream Networks, Inc. GWN76xx Wi-Fi Access Points Master/Slave Architecture Guide

Wireless PC Network Settings

WRE2206. User s Guide. Quick Start Guide. Wireless N300 Range Extender. Default Details. Version 1.00 Edition 1, 01/2015

123 Manual, LP-1522 Broadband Wireless AP/Router, Point to point/ Point to Multipoint plus Access point installation mode.

Network User s Guide

AWAP02O-1W Installation Guide

Wireless USB Port Multi-Functional Printer Server. Model # AMPS240W. User s Manual. Ver. 1A

On the left hand side of the screen, click on Setup Wizard and go through the Wizard.

VDSL Router 4 Port Wi-Fi Dual Band (NT3BB-4PVWN-147) Quick Installation Guide

WiFi Smart Control Reference Guide

54Mbps Pocket Wireless Access Point (WL-330g)

Configuring the network clients

BR411AP n Wireless Access Point and Bridge

FEATURES HARDWARE CONNECTION

Customer Installation Guide NBG-4615 v2 ZyXEL Wireless Router

Table of Contents. Page ii

A Division of Cisco Systems, Inc. GHz g. Wireless-G. User Guide. Access Point WIRELESS. WAP54G v2. Model No.

A Division of Cisco Systems, Inc. GHz g. Wireless-G. User Guide. Broadband Router WIRELESS WRT54G. Model No.

Quick Start Guide for Standalone EAP

7. Server Configuration Introduction Search for All Available MFP Server Status of MFP Server

A Division of Cisco Systems, Inc. GHz 2, g. Wireless-G. User Guide. PCI Adapter WIRELESS. with SpeedBooster WMP54GS (EU/UK/LA) Model No.

Wireless 11n Smart Repeater AP (1T1R)

GHz g. Wireless A+G. User Guide. Notebook Adapter. Dual-Band. Dual-Band WPC55AG a. A Division of Cisco Systems, Inc.

XA20-XA25 and HF G30 Transferring files via FTP

How to connect to a Wi-Fi or Wireless Network

Oct Wi-Fi Concierge Web Portal User Guide - English

Setup Guide Multi-Link

BR-6428HPn User Manual

DCP585CW Windows Network Connection Repair Instructions

Quick Installation Guide of Acer WLAN 11b Broadband Router

Notebook Adapter. Quick Installation Guide WPC300N (EU/LA) Package Contents

WI-FI HUB+ TROUBLESHOOTING GUIDE

Setting up T&D s TR-7wf Data Loggers With the TR-7wf/nw for Windows Software

Wireless Setup Guide (for Windows XP, Windows Vista, Windows 7 and Mac OSx)

Settings Settings

PePWave Mesh Connector User Manual

Mobile Printer CMP-40 Utility Manual (V1.76)

Open the App Store and search for the Easy Color or True Color app. You can now link your smartphone with the Wi receiver in several ways.

Learn How to Configure EnGenius Wi-Fi Products for Popular Applications

A5500 Configuration Guide

802.11N Wireless Broadband Router

En Wireless Mobile Utility (ios) User s Manual. D750, D610, D600, D7200, D7100, D5500, D5300, D5200, D3300, Df

EOS 5D Mark IV (WG) Wi-Fi (Wireless Communication) Function Instruction Manual ENGLISH INSTRUCTION MANUAL

Transcription:

ELS-01/ELS-01C/ELS-01X (type U) Version 1.85 and 1.90 New Functions The firmware updater has been divided and released in two version steps. Version 1.85: not including Ad Hoc mode Version 1.90: including Ad Hoc mode The Ad Hoc mode can be used from a version 1.90. For details on the Ad Hoc mode, please see pages 6 and 9. Since the Electone Internet Direct Connection service is no longer available, the corresponding Internet Direct Connection function is no longer available. Also, the compatibility with smart devices, such as iphone and ipad, has been added. This has changed the setting method of the wireless LAN setting. For up-to-date instructions about the setting method of the wireless LAN, refer to this manual. The LCD screenshots in this manual are taken from the ELS-01C. Added and deleted functions Deleted the Internet Direct Connection function Since the Electone Internet Direct Connection service has been discontinued, the Internet Direct Connection function is no longer available. Added compatibility with smart devices, such as iphone and ipad You can now connect smart devices, such as iphone and ipad, to this Electone. Electone-compatible apps provide many more convenient, enjoyable ways to use this Electone. EN ELS-01/ELS-01C/ELS-01X (type U) Version 1.85 and 1.90 New Functions 1

Connections Connecting to an iphone/ ipad You can connect a smart device such as an iphone or ipad to the instrument. By using an application tool on your smart device, you can take advantage of convenient functions and get more enjoyment out of this instrument. For details on connections, refer to the iphone/ipad Connection Manual on the website. http://download.yamaha.com/ For information about compatible smart devices and application tools, access the following page: http://www.yamaha.com/kbdapps/ Connection with a USB wireless LAN adaptor (sold separately) The USB wireless LAN adaptor lets you connect the Electone to an iphone/ipad wirelessly. For details about the USB wireless LAN adaptor, contact your nearest Yamaha representative or the distributor listed at the end (or beginning) of your Owner s Manual. Or you can access the following website and contact Yamaha support at your location. http://www.yamaha.com/contact/ To enable a wireless connection between the Electone and an iphone/ipad, follow the instructions in the iphone/ ipad Connection Manual on the website, and also refer back to Wireless LAN settings in this manual for the specific Wireless LAN settings you ll need to make for wireless connection. NOTE MIDI and [USB TO HOST] terminals are automatically disabled when the USB wireless LAN adaptor is connected. Wireless LAN settings Start wireless connection according to the instructions in the iphone/ipad Connection Manual on the website, then make sure to make appropriate setups from the following instructions: Automatic Setup by WPS, Displaying available networks in the wireless LAN and connecting to a network, Manual Setup or Connecting by the Ad Hoc Mode. Refer to pages 3 6 in this Manual, then set up as required. If there is no access point, follow the instructions in Connecting by the Ad Hoc Mode (page 6). The Ad Hoc mode can be used from version 1.90. Reference Page Wireless LAN Detailed Settings (page 7) Initialize the wireless LAN settings (page 9) NOTICE When you use the instrument along with an application on your iphone/ipad, we recommend that you first set Airplane Mode to ON then set Wi-Fi to ON on your iphone/ipad in order to avoid noise caused by communication. Do not place your iphone/ ipad in an unstable position. Doing so may cause the device to fall and result in damage. NOTE The [USB TO DEVICE] terminal on the instrument can be connected to a USB wireless LAN adaptor. Before using the [USB TO DEVICE] terminal, be sure to read Precautions when using the [USB TO DEVICE] terminal in the Owner s Manual. 2 ELS-01/ELS-01C/ELS-01X (type U) Version 1.85 and 1.90 New Functions

Automatic Setup by WPS If your access point supports WPS, you can easily connect the instrument to access point by WPS, without making settings, such as key input, etc. NOTE Check whether your access point supports WPS by referring to the owner s manual for the access point you are using. 1 Connect the USB wireless LAN adaptor. 5 Press the [OK] button to start WPS setup, then press the WPS button on your access point within two minutes. The Connected indication appears when connection between the instrument and the access point is successful. Connected indication appears. 2 Press the [UTILITY] button, then press the [WIRELESS LAN] button on the display to call up the WIRELESS LAN Page. DISPLAY SELECT VOICE DISPLAY A.B.C. M.O.C. MDR FOOT SWITCH UTILITY INTERNET RHYTHM PROGRAM VOICE EDIT PATTERN SEQUENCE U.ORGAN L.ORGAN ROTARY SP SPEED 6 After successfully enabling connection between the instrument and the access point, connect the iphone/ipad to the access point by referring to the iphone/ipad Connection Manual. Wireless LAN mode 3 Make sure that the wireless LAN mode is set to Infrastructure Mode. If the wireless LAN mode is set to Ad Hoc Mode, press the [MODE CHANGE] button in the display to switch to the Infrastructure Mode (page 6). 4 Press the [WPS] button in the WIRELESS LAN Page. A message appears prompting confirmation of operation. You can cancel the operation at this point by pressing the [CANCEL] button. ELS-01/ELS-01C/ELS-01X (type U) Version 1.85 and 1.90 New Functions 3

Displaying available networks in the wireless LAN and connecting to a network Select the desired Network for connection from the Network list in the display by following the steps below. 1 Connect the USB wireless LAN adaptor. 2 Press the [UTILITY] button, then press the [WIRELESS LAN] button on the display to call up the WIRELESS LAN Page. DISPLAY SELECT VOICE DISPLAY A.B.C. M.O.C. MDR 5 Select the desired network by pressing the button shown the name of the network in the display. For a network without a lock icon: Connecting starts. For a network with a lock icon: You need to enter the proper password, which is identical to that in the settings on the Access Point. For details on how to enter characters, refer to the Changing the Song Name in the Owner s Manual. After entering the password, press the [OK] button in the display to finalize the setting. This operation starts connecting automatically. The Connected indication appears when the instrument and the access point have been successfully connected. FOOT SWITCH UTILITY INTERNET RHYTHM PROGRAM VOICE EDIT PATTERN SEQUENCE U.ORGAN L.ORGAN ROTARY SP SPEED Wireless LAN mode 6 After successfully enabling connection between the instrument and the access point, connect the iphone/ipad to the access point by referring to the iphone/ipad Connection Manual. 3 Make sure that the wireless LAN mode setting is Infrastructure Mode. When the wireless LAN mode is Ad Hoc mode, press the [MODE CHANGE] button in the display to switch to the Infrastructure Mode (page 6). 4 Press the [UPDATE] button in the display to call up the network list. For a network with a lock icon ( ), you need to enter the proper password. 4 ELS-01/ELS-01C/ELS-01X (type U) Version 1.85 and 1.90 New Functions

Manual Setup If you cannot find the desired network on the display, it may be a network that is closed or hidden. In this case, you will need to manually input SSID, Security and Password settings for connection. NOTE About the confirmation and changes in the access point settings, refer to the manual of the access point. 1 Perform the same operation as in steps 1 3 in the Displaying available networks in the wireless LAN and connecting to a network instructions on page 4. 2 Press to select [OTHER] at the bottom of the network list. The OTHER NETWORK display will be shown. SECURITY Press the [SECURITY] button in the display to call up the display for security select, then press either the [NONE], [WPA2-PSK (AES)] or [WEP] button. PASSWORD Press the [PASSWORD] button to call up the display for Password input, then set the password in the same way as SSID. Press the [OK] button to finalize the setting. NOTE The password cannot be set when you select [NONE] for the security setting. 4 Press the [CONNECT] button to start connection. The Connected indication appears when the instrument and the access point have been successfully connected. 5 After successfully enabling connection between the instrument and the access point, connect the iphone/ipad to the access point by referring to the iphone/ipad Connection Manual. 3 Set the SSID, Security and Password to the same as the settings on the access point. Set the same contents with the setting contents by the access point side. SSID Press the [SSID] button in the display to call up the display for SSID input, then enter the SSID. For details on how to enter the characters, refer to the Changing the Song Name in the Owner s Manual. Up to 32 characters (half size), alphanumeric characters, marks can be entered. After entering the SSID, press the [OK] button to finalize the setting. ELS-01/ELS-01C/ELS-01X (type U) Version 1.85 and 1.90 New Functions 5

Connecting by the Ad Hoc Mode Wireless LAN Mode 1 Set the Wireless LAN mode to Ad Hoc Mode. Refer to Wireless LAN Mode. 2 The settings for the instrument are complete if you do not need to change the SSID and so on. Connect the iphone/ipad to the instrument by referring to the iphone/ipad Connection Manual. You can change the SSID, Security, etc. from the DETAIL display. Reference Page Wireless LAN Detailed Settings (page 7) 1 Connect the USB wireless LAN adaptor. 2 Press the [UTILITY] button, then press the [WIRELESS LAN] button on the display to call up the WIRELESS LAN Page. DISPLAY SELECT VOICE DISPLAY FOOT SWITCH A.B.C. M.O.C. UTILITY MDR INTERNET RHYTHM PROGRAM VOICE EDIT PATTERN SEQUENCE U.ORGAN L.ORGAN ROTARY SP SPEED Wireless LAN mode 3 Set the Wireless LAN mode. You can set between two modes: INFRASTRUCTURE and AD HOC. Press the [MODE CHANGE] button on the display to call up a message prompting confirmation of the operation, then press the [OK] button to execute the operation. 6 ELS-01/ELS-01C/ELS-01X (type U) Version 1.85 and 1.90 New Functions

Wireless LAN Detailed Settings You can set the detailed settings for each mode: INFRASTRUCTURE and AD HOC. There is no need to change or make any settings if you ve enabled connection between the iphone/ipad and instrument. Reference Page Wireless LAN Mode (page 6) 1 Set the Wireless LAN mode, then call up the display for detailed settings by pressing the [DETAIL] button in the WIRELESS LAN display. INFRASTRUCTURE mode AD HOC mode DETAIL (IP ADDRESS) DETAIL (WIRELESS) DETAIL (OTHER) DETAIL (IP ADDRESS) DETAIL (OTHER) ELS-01/ELS-01C/ELS-01X (type U) Version 1.85 and 1.90 New Functions 7

2 As necessary, set the detailed settings. Wireless LAN mode Display Item Default setting Setting/Input INFRASTRUCTURE mode DETAIL (IP ADDRESS) display DHCP ON Determines whether or not DHCP is used. If your router is compatible with DHCP, select [ON] (set DNS automatically) here. Select on or off by pressing [ON] or [OFF] button on the display. IP ADDRESS SUBNET MASK 0.0.0.0 0.0.0.0 Set the wireless LAN detailed settings. IP Address, Subnet Mask, Gateway, DNS Server1, DNS Server2 can be set GATEWAY 0.0.0.0 when DHCP is set to Off but cannot be set when DHCP set to On. For details on DNS SERVER 1 0.0.0.0 confirmation and changes in the setting DNS SERVER 2 0.0.0.0 of the access point on the router side, refer to the owner s manual for the product you are using. For details on how to enter characters, refer to the instructions Changing the Song Name in the Owner s Manual. The setting range is 0.0.0.0 255.255.255.255. AD HOC mode DETAIL (WIRELESS) display DETAIL (IP ADDRESS) display SSID ap-(model name, such as ELS-01C )- (last 6 characters of MAC address in lowercase); or simply ap-(model name), if MAC address cannot be used. CHANNEL 11 SECURITY PASSWORD DHCP ON IP ADDRESS 192.168.0.1 To find the specific MAC address, see MAC address below. SSID, Security and Password can be set in the same way as those described in the section Manual Setup on page 5. The last 6 characters of the MAC address must be entered in lowercase. Press the number button which appears by pressing the [CHANNEL] button on the display then, select the channel. DHCP and IP Address can be set in the same way as those of INFRASTRUCTURE mode in this table. Subnet Mask can be selected in the list. SUBNET MASK 255.255.255.0 INFRASTRUCTURE mode / AD HOC mode DETAIL (OTHER) display HOST NAME (Model name, such as ELS-01C )-(last 6 characters of MAC address in lowercase); or simply (model name), if MAC address cannot be used. Set the Host name. Up to 57 characters (half size) including alphanumeric characters, the _ (underscore) and - (hyphen) character. For details on how to enter characters, refer to the instructions Changing the Song Name in the Owner s Manual. After entering the characters, press the [OK] button on the display to finalize the setting. The last 6 characters of the MAC address must be entered in lowercase. MAC ADDRESS Shows the MAC address of the USB wireless LAN adaptor. You cannot change the MAC address here. LAN DRIVER VERSION This only displays the version of the LAN driver; the setting cannot be made. STATUS 00000000 Shows the error code of network function. 00000000 means no error. 3 Save the settings. Set the detailed settings, then press the [SAVE] button on the display. When the saving operation is completed, the detailed settings display returns to the previous display. 8 ELS-01/ELS-01C/ELS-01X (type U) Version 1.85 and 1.90 New Functions

Initialize the wireless LAN settings Factory Set (Initializing the Electone) in the Owner s Manual does not affect the wireless LAN settings, which can be initialized by the following procedure. Be careful when executing initialize, since it erases all the wireless LAN settings and replaces them with the factory defaults. 1 Press the [UTILITY] button, then press the [WIRELESS LAN] button on the display to call up the WIRELESS LAN Page. 2 Initialize the wireless LAN settings. Press the [INITIALIZE] button on the display. A message appears prompting confirmation of operation. Press the [OK] button to execute the operation, or the [CANCEL] button to cancel. Glossary of Terms Access point Ad Hoc mode DHCP DNS server Gateway Infrastructure mode IP address LAN Router Site SSID Subnet mask Wireless LAN WPS A device which acts as a base station when transmitting data by wireless LAN. Some access points are combined with modem functions. Communication method for performing data communication with the terminal and other devices directly without using a relay device, such as an access point of a wireless LAN. A standard or protocol by which IP addresses and other low-level network configuration information can be dynamically and automatically assigned each time the computer and the instrument connect to the Internet. A server that maps names to actual IP addresses of devices connected to a network. A Gateway is a link between two computer programs or systems. Communication method for performing data communication with each terminal via a relay device, such as an access point of the wireless LAN. A string of numbers assigned to each computer connected to a network that indicate the device s location on the network. Short for Local Area Network, this is a data-transfer network that connects a group of computers at a single location (such as an office or home) by means of a special cable. A device that allows multiple devices (e.g., computers, your Yamaha instrument) to share the same Internet connection. Short for website, this refers to the group of web pages that are opened together. For example, the collection of web pages whose addresses begin with http://www.yamaha.com/ is referred to as the Yamaha site. A name used to identify a particular access point, or the wireless networks set as the access point. The structure for dividing a large-scale network. A LAN connection that allows data transfer through a wireless, cable-free connection. A structure to easily make a setting of wireless LAN by pushing only the WPS buttons of an access point and the wireless LAN device. ELS-01/ELS-01C/ELS-01X (type U) Version 1.85 and 1.90 New Functions 9

Manual Development Department 2016 Yamaha Corporation Published 07/2016 MWA0