Models Aruba 5412R zl2 Switch. HP 5406R-44G-PoE+/4SFP (No PSU) v2 zl2 Switch HP 5412R-92G-PoE+/4SFP (No PSU) v2 zl2 Switch

Overview Models Aruba 5406R zl2 Switch Aruba 5412R zl2 Switch HP 5406R-44G-PoE+/2SFP+ (No PSU) v2 zl2 Switch HP 5412R-92G-PoE+/2SFP+ (No PSU) v2 zl2 Switch HP 5406R-44G-PoE+/4SFP (No PSU) v2 zl2 Switch HP 5412R-92G-PoE+/4SFP (No PSU) v2 zl2 Switch HP 5406R-8XGT/8SFP+ (No PSU) v2 zl2 Switch Aruba 5412R 92GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch Aruba 5406R 8-port 1/2.5/5/10GBASE-T PoE+ / 8-port SFP+ (No PSU) v3 zl2 Switch Aruba 5406R 44GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch Aruba 5406R 16-port SFP+ (No PSU) v3 zl2 Switch J9821A J9822A J9823A J9825A J9824A J9826A J9868A JL001A JL002A JL003A JL095A Key Features Powerful Aruba Layer 3 modular switch series delivers high-performance, low latency and resiliency. HPE Smart Rate for high speed multi gigabit bandwidth and PoE+ power. Scalable line rate 40GbE for wireless traffic aggregation. Ready for innovative SDN applications with OpenFlow support. Supports Aruba ClearPass Policy Manager and Aruba Airwave. Product overview The is an industry-leading mobile campus access solution with HPE Smart Rate multi-gigabit ports for high-speed connectivity and bandwidth for next wave 802.11ac devices. It brings enterprise-class resiliency and innovative flexibility and scalability to mobile-first networks. The Aruba 5400R delivers robust virtualization with AllianceOne solutions, hitless failover, enhanced QoS, and security with advanced Layer 3 features with no add-on software licensing required. Based on the 6th generation ProVision ASIC, the has a high-speed, high-capacity architecture with 2 Tbps crossbar switching fabric with low 2.1µ latency, unprecedented programmability, and leading edge SDN applications. This series offers flexible connectivity options with 6 or 12 slot compact chassis, line rate 40 GbE, up to 96 line rate 10GbE ports and up to 288 ports of PoE+. The Aruba 5400R is SDN ready with OpenFlow support and provides a consistent wired/wireless user experience with Aruba ClearPass Policy Manager and Aruba Airwave. Features and Benefits Software-defined networking OpenFlow supports OpenFlow 1.0 and 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control (routing decision) paths Fully flexible OpenFlow creates custom OpenFlow pipelines (processing stages) on-demand to support new SDN applications (requires v3 modules) Unified Wired and Wireless Page 1

Overview ClearPass Policy Manager support unified wired and wireless policies using Aruba ClearPass Policy Manager HTTP redirect function supports HPE Intelligent Management Center (IMC) bring your own device (BYOD) solution Switch auto-configuration automatically configures switch for different settings such as VLAN, CoS, PoE max power, and PoE priority when an Aruba access point is detected. User role defines a set of switch-based policies in areas such as security, authentication, and QoS. A user role can be assigned to a group of users or devices, using switch configuration or ClearPass. Per-port tunneled node provides a secured tunnel to transport network traffic on a per-port basis to an Aruba Controller. Authentication and network policies will be applied and enforced at the Controller Quality of Service (QoS) Advanced classifier-based QoS classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-vlan basis Traffic prioritization allows real-time traffic classification into eight priority levels mapped to eight queues Bandwidth shaping Port-based rate limiting provides per-port ingress-/egress-enforced increased bandwidth Classifier-based rate limiting uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port Reduced bandwidth provides per-port, per-queue egress-based reduced bandwidth Class of Service (CoS) sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ Management Remote intelligent mirroring mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HPE 8200 zl, 6600, 6200 yl, 5400 zl, 5400R, 3500, or 3800 Switch located anywhere on the network RMON, XRMON, and sflow v5 provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events IEEE 802.1AB Link Layer Discovery Protocol (LLDP) advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications Management simplicity provides common software features and CLI implementation across all HPE ProVision-based switches (including the zl and yl switches) Command authorization leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents activity Friendly port names allow assignment of descriptive names to ports Dual flash images provides independent primary and secondary operating system files for backup while upgrading Multiple configuration files stores easily to the flash image Page 2

Overview Comware CLI Comware-compatible CLI bridges the experience of Hewlett Packard Enterprise Comware CLI users who are using the ProVision CLI Display and fundamental Comware CLI commands are natively embedded in the switch CLI; display output is formatted as on Comware-based switches; fundamental commands provide Comware-familiar initial switch setup Configuration Comware CLI commands when Comware commands are entered, CLI help is elicited to formulate the correct ProVision software CLI command Unidirectional Link Detection (UDLD) support HPE UDLD and DLDP protocols to monitor a cable between two switches and shut down the ports on both ends if a broken link is detected, preventing network problems such as loops Zero-Touch ProVisioning (ZTP) simplifies installation of the switch infrastructure using the Aruba Activate-based or a DHCP-based process with AirWave Network Management Connectivity IEEE 802.3az Energy Efficient Ethernet lowers power consumption in periods of low link usage (supported on v2 and higher 10/100/1000 and 10/100 modules) IEEE 802.3af Power over Ethernet (PoE) provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras IEEE 802.3at Power over Ethernet Plus provides up to 30 W per port, for up to 288 ports simultaneously, for PoE- and PoE+-powered devices, such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras Prestandard PoE support detects and provides power to prestandard PoE devices; see the list of supported devices in the product FAQ at: http://www.hpe.com/networking High-density port connectivity provides up to 12 interface module slots and up to 288 wire-speed 10/100/1000 PoE-enabled ports or 96 10-GbE ports per system Jumbo frames on Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disasterrecovery services Auto-MDIX provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports IPv6 IPv6 host enables switch management in an IPv6 network Dual stack (IPv4 and IPv6) transitions IPv4 to IPv6, supporting connectivity for both protocols MLD snooping forwards IPv6 multicast traffic to the appropriate interface IPv6 ACL/QoS supports ACL and QoS for IPv6 traffic IPv6 routing supports static, RIPng, OSPFv3 routing protocols 6in4 tunneling supports encapsulation of IPv6 traffic in IPv4 packets Security provides RA guard, DHCPv6 protection, dynamic IPv6 lockdown, and ND snooping Performance Page 3

Overview High-speed, high-capacity architecture 2 Tbps crossbar switching fabric provides intra-module and inter-module switching with 785.7 million pps throughput on the purpose-built ProVision ASICs Selectable queue configurations allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications Resiliency and high availability Virtual Router Redundancy Protocol (VRRP) allows groups of two routers to dynamically back each other up to create highly available routed environments for IPv4 and IPv6 networks Nonstop switching improves network availability to better support critical applications such as unified communication and mobility; interface and fabric modules continue switching traffic during failover from active to standby management module Nonstop routing enhances Layer 3 high availability; OSPFv2/v3 and VRRP will continue to operate and route network traffic during failover from an active to a standby management module Redundant management and power provide enhanced system availability and continuity of operations IEEE 802.1s Multiple Spanning Tree Protocol provides high link availability in multiple VLAN environments by allowing multiple spanning trees; encompasses IEEE 802.1D Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.3ad Link Aggregation Control Protocol (LACP) and Hewlett Packard Enterprise port trunking support up to 144 trunks, each with up to eight links (ports) per trunk Distributed trunking enables loop-free and redundant network topology without using Spanning Tree Protocol; allows a server or switch to connect to two switches using one logical trunk for redundancy and load sharing Optional redundant power supply provides uninterrupted power and allows hot-swapping of the redundant power supplies when installed Hot-swappable modules allows dissimilar modules, and power supplies in a redundant power supply configuration to be added or swapped without interrupting the network Sparing simplicity HPE zl-common accessories (interface modules and power supplies) Uplink Failure Detection provides active-standby network path redundancy for servers that are configured for active-standby NIC teaming SmartLink provides easy-to-configure link redundancy of active and standby links Layer 2 switching IEEE 802.1v protocol VLANs isolate select non-ipv4 protocols automatically into their own VLANs IEEE 802.1ad Q-in-Q increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a highspeed campus or metro network MAC-based VLAN provides granular control and security; uses RADIUS to map a MAC address/user to specific VLANs (requires v2 modules) Rapid Per-VLAN Spanning Tree (RPVST+) allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+ Hewlett Packard Enterprise switch meshing dynamically load balances across multiple active redundant links to increase available aggregate bandwidth; allows concurrent Layer 3 routing with v2 or higher modules GVRP and MVRP Page 4

Overview allows automatic learning and dynamic assignment of VLANs VxLAN encapsulation (tunneling) protocol for overlay network that enables a more scalable virtual network deployment (requires v3 modules) VLAN support and tagging supports the IEEE 802.1Q standard and 4096 VLANs simultaneously Layer 3 services User Datagram Protocol (UDP) helper function allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP Loopback interface address defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability Route maps provide more control during route redistribution; allow filtering and altering of route metrics DHCP server centralizes and reduces the cost of IPv4 address management Bidirectional Forwarding Detection (BFD) monitor link connectivity and reduces network convergence time for OSPFv2, and VRRP (requires v3 modules) Layer 3 routing Static IP routing provides manually configured routing for both IPv4 and IPv6 networks OSPF provides OSPFv2 for IPv4 routing and OSPFv3 for IPv6 routing Policy-based routing uses a classifier to select traffic that can be forwarded based on policy set by the network administrator (requires v2 or higher modules) Border Gateway Protocol (BGP) provides IPv4 Border Gateway Protocol routing, which is scalable, robust, and flexible Routing Information Protocol (RIP) provides RIPv1, RIPv2, and RIPng routing Security Access control lists (ACLs) provide filtering based on the IP field, source/destination IP address/subnet, and source/destination TCP/UDP port number on per-vlan or per-port basis Multiple user authentication methods IEEE 802.1X users per port provides authentication of multiple IEEE 802.1X users per port Web-based authentication authenticates from a Web browser for clients that do not support IEEE 802.1X supplicant MAC-based authentication client is authenticated with the RADIUS server based on the client's MAC address Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port switch port accepts up to 32 sessions of IEEE 802.1X, Web, and MAC authentications DHCP protection blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks Secure management access delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3 Page 5

Overview Switch CPU protection provides automatic protection against malicious network traffic trying to shut down the switch ICMP throttling defeats ICMP denial-of-service attacks by enabling any switch port to automatically throttle ICMP traffic STP BPDU port protection blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks Dynamic IP lockdown works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing Dynamic ARP protection blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data STP Root Guard protects the root bridge from malicious attacks or configuration mistakes Detection of malicious attacks monitors 10 types of network traffic and sends a warning when an anomaly that potentially can be caused by malicious attacks is detected Port security allows access only to specified MAC addresses, which can be learned or specified by the administrator MAC address lockout prevents particular configured MAC addresses from connecting to the network Source-port filtering allows only specified ports to communicate with each other RADIUS/TACACS+ eases switch management security administration by using a password authentication server Secure Shell encrypts all transmitted data for secure remote CLI access over IP networks Secure Sockets Layer (SSL) encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch Secure FTP allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file Management Interface Wizard helps secure management interfaces such as SNMP, telnet, SSH, SSL, Web, and USB at the desired level Switch management logon security helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication Security banner displays a customized security policy when users log in to the switch IEEE 802.1AE MACsec provides security on a link between two switch ports (1Gbps or 10Gbps) using standard encryption and authentication based on pre-shared key. MACsec software support not yet available for modules with Smart Rate ports (requires v3 modules) Private VLAN provides network security by restricting peer-to-peer communication to prevent a variety of malicious attacks; typically a switch port can only communicate with other ports in the same community and/or an uplink port, regardless of VLAN ID or destination MAC address Convergence IP multicast routing includes PIM Sparse and Dense modes to route IP multicast traffic IP multicast snooping (data-driven IGMP) automatically prevents flooding of IP multicast traffic LLDP-MED (Media Endpoint Discovery) defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to configure automatically network devices such as IP phones PoE allocations Page 6

Overview support multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user specified) to allocate PoE power for more efficient energy savings Auto VLAN configuration for voice RADIUS VLAN: uses a standard RADIUS attribute and LLDP-MED to automatically configure a VLAN for IP phones CDPv2: uses CDPv2 to configure legacy IP phones Local MAC Authentication assigns attributes such as VLAN and QoS using locally configured profile that can be a list of MAC prefixes Warranty and support Limited Lifetime Warranty see http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase. Software releases to find software for your product, refer to http://www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary Page 7

Configuration Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution. Aruba 5406R zl2 Switch 1 Power Supply required 4U - Height HP 5406R-8XGT/8SFP+ (No PSU) v2 zl2 Switch 1 Power Supply required 8 RJ-45 10GbE ports 1 - J9546A HPE 8-port 10GbE SFP+ v2 zl Module included 1 - J9538A HPE 8-port 10GbE SFP+ v2 zl Module included (min=0 \ max=8 SFP+ Transceivers) 4U - Height Aruba 5406R 8-port 1/2.5/5/10GBASE-T PoE+ / 8-port SFP+ (No PSU) v3 zl2 Switch 1 Power Supply required 8 RJ-45 10GbE PoE+ ports 1 - J9995A Aruba 8-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module included 1 - J9993A Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \ max=8 SFP+ Transceivers) 4U - Height Aruba 5406R 16-port SFP+ (No PSU) v3 zl2 Switch 1 Power Supply required 2 - J9993A Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \ max=16 SFP+ Transceivers) 4U - Height HP 5406R-44G-PoE+/2SFP+ (No PSU) v2 zl2 Switch 1 Power Supply required 1 - J9536A HPE 20-port Gig-T PoE+/2-port 10GbE SFP+ v2 zl Module included(min=0 \ max=2 SFP+ Transceivers) 1 - J9534A HPE 24-port Gig-T PoE+ v2 zl Module included J9821A J9868A NOTE: 1 JL002A NOTE: 1 JL095A NOTE: 1 J9823A NOTE: 1 Page 8

Configuration 4U - Height HP 5406R-44G-PoE+/4SFP (No PSU) v2 zl2 Switch 1 Power Supply required 1 - J9535A HPE 20-port Gig-T PoE+/4-port SFP v2 zl Module included (min=0 \ max=4 SFP Transceivers) 1 - J9534A HPE 24-port Gig-T PoE+ v2 zl Module included 4U - Height Aruba 5406R 44GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch 1 Power Supply required 1 - J9990A Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \ max=4 SFP Transceivers) 1 - J9986A Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module included 4U - Height Aruba 5412R zl2 Switch 2 Power Supplies required 7U - Height HP 5412R-92G-PoE+/2SFP+ (No PSU) v2 zl2 Switch 2 Power Supplies required 1 - J9536A HPE 20-port Gig-T PoE+/2-port 10GbE SFP+ v2 zl Module included(min=0 \ max=2 SFP+ Transceivers) 3 - J9534A HPE 24-port Gig-T PoE+ v2 zl Module included 7U - Height HP 5412R-92G-PoE+/4SFP (No PSU) v2 zl2 Switch 2 Power Supplies required 1 - J9535A HPE 20-port Gig-T PoE+/4-port SFP v2 zl Module included (min=0 \ max=4 SFP Transceivers) 3 - J9534A HPE 24-port Gig-T PoE+ v2 zl Module included 7U - Height Aruba 5412R 92GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch J9824A NOTE: 2 JL003A NOTE: 2 J9822A J9825A NOTE: 1 J9826A NOTE: 2 JL001A Page 9

Configuration 2 Power Supplies required 1 - J9990A Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \ max=4 SFP Transceivers) 3 - J9986A Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Modules included 7U - Height NOTE: 2 Configuration Rules: NOTE 1 The following Transceivers install into this Chassis : HPE X121 1G SFP LC SX Transceiver HPE X121 1G SFP LC LX Transceiver HPE X121 1G SFP LC LH Transceiver HPE X121 1G SFP RJ45 T Transceiver HP X122 1G SFP LC BX-D Transceiver HP X122 1G SFP LC BX-U Transceiver HPE X132 10G SFP+ LC ER Transceiver HPE X132 10G SFP+ LC LR Transceiver HPE X132 10G SFP+ LC LRM Transceiver HPE X132 10G SFP+ LC SR Transceiver HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable J4858C J4859C J4860C J8177C J9142B J9143B J9153A J9151A J9152A J9150A J9281B J9283B J9285B J9300A J9301A J9302A NOTE 2 The following Transceivers install into this switch: HPE X121 1G SFP LC SX Transceiver HPE X121 1G SFP LC LX Transceiver HPE X121 1G SFP LC LH Transceiver HPE X121 1G SFP RJ45 T Transceiver HP X122 1G SFP LC BX-D Transceiver HP X122 1G SFP LC BX-U Transceiver HPE X111 100M SFP LC FX Transceiver J4858C J4859C J4860C J8177C J9142B J9143B J9054C Box Level Integration CTO Models CTO Solution SKU HP 54xx Configure-to-order Switch SSP trigger SKU J9809A CTO Switch Chassis Aruba 5406R zl2 Switch J9821A Page 10

Configuration 1 Power Supply required 4U - Height HP 5406R-8XGT/8SFP+ (No PSU) v2 zl2 Switch 1 Power Supply required 8 RJ-45 10GbE ports 1 - J9546A HPE 8-port 10GbE SFP+ v2 zl Module included 1 - J9538A HPE 8-port 10GbE SFP+ v2 zl Module included (min=0 \ max=8 SFP+ Transceivers) 4U - Height Aruba 5406R 8-port 1/2.5/5/10GBASE-T PoE+ / 8-port SFP+ (No PSU) v3 zl2 Switch 1 Power Supply required 8 RJ-45 10GbE PoE+ ports 1 - J9995A Aruba 8-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module included 1 - J9993A Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \ max=8 SFP+ Transceivers) 4U - Height Aruba 5406R 16-port SFP+ (No PSU) v3 zl2 Switch 1 Power Supply required 2 - J9993A Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \ max=16 SFP+ Transceivers) 4U - Height HP 5406R-44G-PoE+/2SFP+ (No PSU) v2 zl2 Switch 1 Power Supply required 1 - J9536A HPE 20-port Gig-T PoE+/2-port 10GbE SFP+ v2 zl Module included(min=0 \ max=2 SFP+ Transceivers) 1 - J9534A HPE 24-port Gig-T PoE+ v2 zl Module included 4U - Height HP 5406R-44G-PoE+/4SFP (No PSU) v2 zl2 Switch 1 Power Supply required 1 - J9535A HPE 20-port Gig-T PoE+/4-port SFP v2 zl Module included (min=0 \ max=4 SFP Transceivers) 1 - J9534A HPE 24-port Gig-T PoE+ v2 zl Module included NOTE: 10 J9868A NOTE: 1, 10 JL002A NOTE: 1, 10 JL095A NOTE: 1, 10 J9823A NOTE: 1, 10 J9824A NOTE: 2, 10 Page 11

Configuration 4U - Height Aruba 5406R 44GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch 1 Power Supply required 1 - J9990A Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \ max=4 SFP Transceivers) 1 - J9986A Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module included 4U - Height Aruba 5412R zl2 Switch 2 Power Supplies required 7U - Height HP 5412R-92G-PoE+/2SFP+ (No PSU) v2 zl2 Switch 2 Power Supplies required 1 - J9536A HPE 20-port Gig-T PoE+/2-port 10GbE SFP+ v2 zl Module included(min=0 \ max=2 SFP+ Transceivers) 3 - J9534A HPE 24-port Gig-T PoE+ v2 zl Module included 7U - Height HP 5412R-92G-PoE+/4SFP (No PSU) v2 zl2 Switch 2 Power Supplies required 1 - J9535A HPE 20-port Gig-T PoE+/4-port SFP v2 zl Module included (min=0 \ max=4 SFP Transceivers) 3 - J9534A HPE 24-port Gig-T PoE+ v2 zl Module included 7U - Height Aruba 5412R 92GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch 2 Power Supplies required 1 - J9990A Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \ max=4 SFP Transceivers) 3 - J9986A Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Modules included 7U - Height JL003A NOTE: 2, 10 J9822A NOTE: 10 J9825A NOTE: 1, 10 J9826A NOTE: 2, 10 JL001A NOTE: 2, 10 Page 12

Configuration Configuration Rules: NOTE 1 The following Transceivers install into this Chassis : HPE X121 1G SFP LC SX Transceiver HPE X121 1G SFP LC LX Transceiver HPE X121 1G SFP LC LH Transceiver HPE X121 1G SFP RJ45 T Transceiver HP X122 1G SFP LC BX-D Transceiver HP X122 1G SFP LC BX-U Transceiver HPE X132 10G SFP+ LC ER Transceiver HPE X132 10G SFP+ LC LR Transceiver HPE X132 10G SFP+ LC LRM Transceiver HPE X132 10G SFP+ LC SR Transceiver HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable J4858C J4859C J4860C J8177C J9142B J9143B J9153A J9151A J9152A J9150A J9281B J9283B J9285B J9300A J9301A J9302A NOTE 2 NOTE 10 The following Transceivers install into this switch: HPE X121 1G SFP LC SX Transceiver HPE X121 1G SFP LC LX Transceiver HPE X121 1G SFP LC LH Transceiver HPE X121 1G SFP RJ45 T Transceiver HP X122 1G SFP LC BX-D Transceiver HP X122 1G SFP LC BX-U Transceiver HPE X111 100M SFP LC FX Transceiver If the Switch Chassis is to be Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis and integrated to the J9809A - HPE 5400 CTO Enablement. (Min 1/Max 1 Switch per SSP) J4858C J4859C J4860C J8177C J9142B J9143B J9054C Rack Level Integration CTO Models CTO Switch Chassis Aruba 5406R zl2 Switch 1 Power Supply required 4U Height HP 5406R-8XGT/8SFP+ (No PSU) v2 zl2 Switch 1 Power Supply required 8 RJ-45 10GbE ports 1 - J9546A HPE 8-port 10GbE SFP+ v2 zl Module included 1 - J9538A HPE 8-port 10GbE SFP+ v2 zl Module included (min=0 \ max=8 SFP+ Transceivers) J9821A NOTE: 11 J9868A NOTE: 1, 11 Page 13

Configuration 4U - Height Aruba 5406R 8-port 1/2.5/5/10GBASE-T PoE+ / 8-port SFP+ (No PSU) v3 zl2 Switch 1 Power Supply required 8 RJ-45 10GbE PoE+ ports 1 - J9995A Aruba 8-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module included 1 - J9993A Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \ max=8 SFP+ Transceivers) 4U - Height Aruba 5406R 16-port SFP+ (No PSU) v3 zl2 Switch 1 Power Supply required 2 - J9993A Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \ max=16 SFP+ Transceivers) 4U - Height HP 5406R-44G-PoE+/2SFP+ (No PSU) v2 zl2 Switch 1 Power Supply required 1 - J9536A HPE 20-port Gig-T PoE+/2-port 10GbE SFP+ v2 zl Module included(min=0 \ max=2 SFP+ Transceivers) 1 - J9534A HPE 24-port Gig-T PoE+ v2 zl Module included 4U - Height HP 5406R-44G-PoE+/4SFP (No PSU) v2 zl2 Switch 1 Power Supply required 1 - J9535A HPE 20-port Gig-T PoE+/4-port SFP v2 zl Module included (min=0 \ max=4 SFP Transceivers) 1 - J9534A HPE 24-port Gig-T PoE+ v2 zl Module included 4U - Height Aruba 5406R 44GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch 1 Power Supply required 1 - J9990A Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \ max=4 SFP Transceivers) 1 - J9986A Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module included JL002A NOTE: 1, 11 JL095A NOTE: 1, 11 J9823A NOTE: 1, 11 J9824A NOTE: 2, 11 JL003A NOTE: 2, 11 Page 14

Configuration 4U - Height Aruba 5412R zl2 Switch 2 Power Supplies required 7U - Height HP 5412R-92G-PoE+/2SFP+ (No PSU) v2 zl2 Switch 2 Power Supplies required 1 - J9536A HPE 20-port Gig-T PoE+/2-port 10GbE SFP+ v2 zl Module included(min=0 \ max=2 SFP+ Transceivers) 3 - J9534A HPE 24-port Gig-T PoE+ v2 zl Module included 7U - Height HP 5412R-92G-PoE+/4SFP (No PSU) v2 zl2 Switch 2 Power Supplies required 1 - J9535A HPE 20-port Gig-T PoE+/4-port SFP v2 zl Module included (min=0 \ max=4 SFP Transceivers) 3 - J9534A HPE 24-port Gig-T PoE+ v2 zl Module included 7U - Height Aruba 5412R 92GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch 2 Power Supplies required 1 - J9990A Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \ max=4 SFP Transceivers) 3 - J9986A Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Modules included 7U - Height J9822A NOTE: 11 J9825A NOTE: 1, 11 J9826A NOTE: 2, 11 JL001A NOTE: 2, 11 Configuration Rules: NOTE 1 The following Transceivers install into this Chassis : HPE X121 1G SFP LC SX Transceiver HPE X121 1G SFP LC LX Transceiver HPE X121 1G SFP LC LH Transceiver HPE X121 1G SFP RJ45 T Transceiver HP X122 1G SFP LC BX-D Transceiver HP X122 1G SFP LC BX-U Transceiver HPE X132 10G SFP+ LC ER Transceiver J4858C J4859C J4860C J8177C J9142B J9143B J9153A Page 15

Configuration NOTE 2 NOTE 11 HPE X132 10G SFP+ LC LR Transceiver HPE X132 10G SFP+ LC LRM Transceiver HPE X132 10G SFP+ LC SR Transceiver HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable The following Transceivers install into this switch: HPE X121 1G SFP LC SX Transceiver HPE X121 1G SFP LC LX Transceiver HPE X121 1G SFP LC LH Transceiver HPE X121 1G SFP RJ45 T Transceiver HP X122 1G SFP LC BX-D Transceiver HP X122 1G SFP LC BX-U Transceiver HPE X111 100M SFP LC FX Transceiver If the CTO Switch Chassis needs to be racked, Then the CTO Base Model needs to integrate (with #0D1) to the HPE Rack. J9151A J9152A J9150A J9281B J9283B J9285B J9300A J9301A J9302A J4858C J4859C J4860C J8177C J9142B J9143B J9054C Enter the following menu selections as integrated to the CTO Model X server above if order is factory built. Modules Management Modules (J9821A, J9868A, JL002A, JL095A, J9823A, J9824A, JL003A, J9822A, J9825A, J9826A, JL001A) System (std 1 // max 2) User Selection (min 0 / max 1) Aruba 5400R zl2 Management Module No Transceivers J9827A I/O Modules J9821A only - System (std 0 // max=6) User Selection (min 0 / max=6) per Chassis J9822A only - System (std 0 // max=12) User Selection (min 0 / max=12) per Chassis J9868A, J9823A, J9824A, JL002A, JL095A, JL003A only - System (std 2 // max=6) User Selection (min 0 / max=4) per Chassis J9825A, J9826A, JL001A only - System (std 4 // max=12) User Selection (min 0 / max=8) per Chassis HPE 20-port Gig-T PoE+/4-port SFP v2 zl Module J9535A min=0 \ max=4 SFP Transceivers NOTE: 1 Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module J9991A Page 16

Configuration No Transceivers Aruba 20-port 10/100/1000BASE-T PoE+ MACsec / 1-port 40GbE QSFP+ v3 zl2 Module J9992A min=0 \ max=1 QSFP+ Transceiver NOTE: 6 HPE 24-port SFP v2 zl Module J9537A min=0 \ max=24 SFP Transceivers NOTE: 1 Aruba 24-port 1GbE SFP MACsec v3 zl2 Module J9988A min=0 \ max=24 SFP Transceivers NOTE: 1 HPE 12-port Gig-T PoE+/12-port SFP v2 zl Module J9637A min=0 \ max=12 SFP Transceivers NOTE: 1 Aruba 12-port 10/100/1000BASE-T PoE+ / 12-port 1GbE SFP MACsec v3 zl2 Module J9989A min=0 \ max=12 SFP Transceivers NOTE: 1 HPE 20-port Gig-T/4-port SFP v2 zl Module J9549A min=0 \ max=4 SFP Transceivers NOTE: 1 HPE 8-port 10GbE SFP+ v2 zl Module J9538A min=0 \ max=8 SFP+ Transceivers NOTE: 5 Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module J9993A min=0 \ max=8 SFP+ Transceivers NOTE: 1, 5 HPE 20-port Gig-T PoE+/2-port 10GbE SFP+ v2 zl Module J9536A min=0 \ max=2 SFP+ Transceivers NOTE: 5 Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec v3 zl2 Module J9990A min=0 \ max=4 SFP+ Transceivers NOTE: 1, 5 HPE 20-port Gig-T/2-port 10GbE SFP+ v2 zl Module J9548A min=0 \ max=2 SFP+ Transceivers NOTE: 5 HPE 8-port 10GBASE-T v2 zl Module No Transceivers Aruba 8-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module No Transceivers J9546A J9995A Page 17

Configuration HPE 24-port Gig-T PoE+ v2 zl Module No Transceivers Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module No Transceivers HPE 24-port 10/100 PoE+ v2 zl Module No Transceivers HPE 24-port Gig-T v2 zl Module No Transceivers Aruba 24-port 10/100/1000BASE-T MACsec v3 zl2 Module No Transceivers J9534A J9986A J9547A J9550A J9987A Aruba 2-port 40GbE QSFP+ v3 zl2 Module J9996A min=0 \ max=2 QSFP+ Transceivers NOTE: 6 HP MSM775 zl Premium Controller Module J9840A No Transceivers NOTE: 10 HPE Advanced Services v2 zl Module with HDD J9857A No Transceivers NOTE: 11 HPE Advanced Services v2 zl Module with SSD J9858A No Transceivers NOTE: 11 Configuration Rules: NOTE 1 The following Transceivers install into this Module: (Use #0D1 if switch is CTO) - if applicable HPE X111 100M SFP LC FX Transceiver HPE X121 1G SFP LC LH Transceiver HPE X121 1G SFP LC SX Transceiver HPE X121 1G SFP LC LX Transceiver HP X122 1G SFP LC BX-D Transceiver HP X122 1G SFP LC BX-U Transceiver HPE X121 1G SFP RJ45 T Transceiver J9054C J4860C J4858C J4859C J9142B J9143B J8177C NOTE 5 The following Transceivers install into this Module: (Use #0D1 or #B01 if switch is CTO) - if applicable HPE X121 1G SFP LC LH Transceiver HPE X121 1G SFP LC SX Transceiver HPE X121 1G SFP LC LX Transceiver HP X122 1G SFP LC BX-D Transceiver J4860C J4858C J4859C J9142B Page 18

Configuration NOTE 6 NOTE 10 NOTE 11 Transceivers SFP Transceivers HP X122 1G SFP LC BX-U Transceiver HPE X121 1G SFP RJ45 T Transceiver HPE X132 10G SFP+ LC ER Transceiver HPE X132 10G SFP+ LC LR Transceiver HPE X132 10G SFP+ LC LRM Transceiver HPE X132 10G SFP+ LC SR Transceiver HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable The following Transceivers install into this Module: (Use #0D1 or #B01 if switch is CTO) - if applicable HPE X142 40G QSFP+ MPO SR4 Transceiver HPE X142 40G QSFP+ LC LR4 SM Transceiver HPE X142 40G QSFP+ MPO esr4 300M Transceiver HPE X242 40G QSFP+ to QSFP+ 1m Direct Attach Copper Cable HPE X242 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable HPE X242 40G QSFP+ to QSFP+ 5m Direct Attach Copper Cable Maximum of this Module per Chassis: J9821A, J9868A, JL002A, JL095A, J9823A, J9824A, JL003A min=0\max=4 per Chassis J9822A, J9825A, J9826A, JL001A min=0\max=6 per Chassis There are no restrictions on which slots these modules may go in. Maximum of this Module per Chassis: J9821A,J9868A, JL002A, JL095A, J9823A, J9824A, JL003A min=0\max=4 per Chassis J9822A, J9825A, J9826A, JL001A min=0\max=6 per Chassis There are no restrictions on which slots these modules may go in. J9143B J8177C J9153A J9151A J9152A J9150A J9281B J9283B J9285B J9300A J9301A J9302A JH231A JH232A JH233A JH234A JH235A JH236A HPE X111 100M SFP LC FX Transceiver HPE X121 1G SFP LC LH Transceiver HPE X121 1G SFP LC LX Transceiver HPE X121 1G SFP LC SX Transceiver HPE X121 1G SFP RJ45 T Transceiver J9054C J4860C J4859C J4858C J8177C SFP+ Transceivers HPE X132 10G SFP+ LC ER Transceiver HPE X132 10G SFP+ LC LR Transceiver HPE X132 10G SFP+ LC LRM Transceiver HPE X132 10G SFP+ LC SR Transceiver J9153A J9151A J9152A J9150A Page 19

Configuration HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable J9281B J9283B J9285B J9300A J9301A J9302A QSFP+ Transceivers HPE X142 40G QSFP+ MPO SR4 Transceiver HPE X142 40G QSFP+ LC LR4 SM Transceiver HPE X142 40G QSFP+ MPO esr4 300M Transceiver HPE X242 40G QSFP+ to QSFP+ 1m Direct Attach Copper Cable HPE X242 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable HPE X242 40G QSFP+ to QSFP+ 5m Direct Attach Copper Cable JH231A JH232A JH233A JH234A JH235A JH236A Internal Power Supplies (J9821A, J9868A, JL002A, JL095A, J9823A, J9824A, JL003A) System (std 0 // max 2) User Selection (min 1 / max 2) (J9822A, J9825A, J9826A, JL001A) System (std 0 // max 4) User Selection (min 2 / max 4) Aruba 5400R 700W PoE+ zl2 Power Supply J9828A includes 1 x c13, 700w NOTE: 2, 4, 6, 7 PDU Cable NA/MEX/TW/JP C15 PDU Jumper Cord (NA/MEX/TW/JP) PDU Cable ROW C15 PDU Jumper Cord (ROW) High Volt Switch to Wall Power Cord NEMA L6-20P Cord (NA/MEX/JP/TW) No Power Cord No Localized Power Cord Selected J9828A#B2B J9828A#B2C J9828A#B2E J9828A#AC3 Aruba 5400R 1100W PoE+ zl2 Power Supply J9829A includes 1 x c15, 1100w NOTE: 2, 4, 6, 7 PDU Cable NA/MEX/TW/JP C15 PDU Jumper Cord (NA/MEX/TW/JP) PDU Cable ROW C15 PDU Jumper Cord (ROW) High Volt Switch to Wall Power Cord J9829A#B2B J9829A#B2C J9829A#B2E Page 20

Configuration NEMA L6-20P Cord (NA/MEX/JP/TW) No Power Cord No Localized Power Cord Selected J9829A#AC3 Aruba 5400R 2750W PoE+ zl2 Power Supply J9830A includes 2 x c19, 2750w NOTE: 2, 4, 6, 7 PDU Cable NA/MEX/TW/JP C19 PDU Jumper Cord (NA/MEX/TW/JP) PDU Cable ROW C19 PDU Jumper Cord (ROW) High Volt Switch to Wall Power Cord NEMA L6-20P Cord (NA/MEX/JP/TW) No Power Cord No Localized Power Cord Selected J9830A#B2B J9830A#B2C J9830A#B2E J9830A#AC3 Configuration Rules: NOTE 2 NOTE 4 NOTE 6 NOTE 7 Localization required on orders without #B2B, #B2C or #B2E options. This power supply is ONLY supported on the J9821A, J9868A, JL002A, JL095A, J9823A, J9824A, JL003A, J9822A, J9825A, JL001A and J9826A switches. If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch. (Offered only in NA, Mexico, Taiwan, and Japan) Power Supplies can be mixed for a switch enclosure Remarks: For J9828A, J9829A, J9830A: Power Supplies can be mixed for a switch enclosure. However, the three different power supplies each require different power cords, and the wall plug that is needed for J9830A is different from the wall plug that is needed for J9828A and J9829A. Moreover, full redundancy and N+1 redundancy are only supported with like power supplies. Drop down under power supply should offer the following options and results: Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO) Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO) High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America, Mexico, Taiwan, and Japan) Cables Page 21

Configuration Multi-Mode Cables HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable AJ833A AJ834A AJ835A AJ836A AJ837A AJ838A AJ839A QK732A QK733A QK734A QK735A QK736A QK737A Switch Enclosure Options Fan Trays Aruba 5406R zl2 Switch Fan Tray Spare Only Aruba 5412R zl2 Switch Fan Tray Spare Only J9831A J9832A Mounting Kit HPE X450 4U/7U Universal 4-post Rackmount Kit J9852A NOTE: 1, 2 Configuration Rules: NOTE 1 NOTE 2 If this Mounting Kit is ordered with #0D1 then it integrates to the HPE Universal Rack. (not the switch) If switches J9821A, J9868A, JL002A, JL095A, J9823A, J9824A, JL003A, J9822A, J9825A, JL001A and J9826A are installed into a rack, Then this Rack Mounting kit is required. Page 22

Technical Specifications Aruba 5406R zl2 Switch (J9821A) Included accessories 1 Aruba 5400R zl2 Management Module (J9827A) 1 Aruba 5406R zl2 Switch Fan Tray (J9831A) I/O ports and slots 6 open module slots Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination Power supplies 2 power supply slots 1 minimum power supply required (ordered separately) Fan tray includes: 1 x J9831A 1 fan tray slot Physical characteristics Dimensions 17.5(w) x 17.75(d) x 6.9(h) in (44.45 x 45.09 x 17.53 cm) (4U height) Weight 24.5 lb (11.11 kg) Memory and processor v3 Gigabit module Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal v2 Gigabit module ARM11 @ 450 MHz; Packet buffer size: 18 MB internal v3 10G module Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal v2 10G module ARM11 @ 550 MHz; Packet buffer size: 18 MB internal v3 40G module Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal Management Module Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); horizontal surface mounting only Performance 1000 Mb Latency < 2.8 µs (FIFO 64-byte packets) IPv6 Ready Certified 10 Gbps Latency < 1.8 µs (FIFO 64-byte packets) 40 Gbps Latency < 1.5 μs (FIFO 64-byte packets) Throughput up to 571.4 Mpps Routing/Switching 960 Gbps capacity Switch fabric speed 1015 Gbps Routing table size 10000 entries (IPv4), 5000 entries (IPv6) MAC address table size 64000 entries Environment Operating temperature 32 F to 113 F (0 C to 45 C); 0 C to 40 C with J8177C transceiver installed, 0 C to 35 C with FIPS Opacity Shield installed Operating relative 15% to 95% @ 113 F (45 C), noncondensing humidity Nonoperating/Storage -40 F to 158 F (-40 C to 70 C) temperature Nonoperating/Storage 15% to 95% @ 149 F (65 C), noncondensing relative humidity Altitude up to 10,000 ft (3 km) Acoustic Power: 44 db, Pressure: 31.7 db ISO 7779, ISO 9296 Electrical characteristics Frequency 50/60 Hz 80plus.org Certification Gold Description Does not come with power supply. Two power supply slots are available; three different power supplies are available. See power supply products for Page 23

Technical Specifications Maximum heat dissipation Voltage NOTES additional specifications. 2450 BTU/hr (2584 kj/hr), (max. non-poe); 3700 BTU/hr (3903 kj/hr) (max. using PoE) 100-127 / 200-240 VAC, rated Heat dissipation does not include heat dissipated by the PoE-powered devices themselves. Safety CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950 Emissions FCC part 15 Class A; EN 55022/CISPR 22 Class A Immunity EN EN 55024, CISPR 24 ESD IEC 61000-4-2; 4 kv CD, 8 kv AD; HPE ENV. 765.002 Radiated IEC 61000-4-3; 3 V/m EFT/Burst IEC 61000-4-4; 1.0 kv (power line), 0.5 kv (signal line) Surge IEC 61000-4-5; 1 kv/2 kv AC, 1kV signal, 0.5 kv DC Conducted IEC 61000-4-6; 3 Vrms Power frequency IEC 61000-4-8; 1 A/m, 50 or 60 Hz magnetic field Management NOTES Services Voltage dips and IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods interruptions Harmonics EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61000-3-3 Aruba AirWave Network Management; IMC Intelligent Management Center; Command-line interface; Web browser; Configuration menu; Out-of-band management (RJ-45 Ethernet); SNMP manager; Outof-band management (serial RS-232c or micro usb) Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C). Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. Aruba 5412R zl2 Switch (J9822A) Included accessories 1 Aruba 5400R zl2 Management Module (J9827A) 1 Aruba 5406R zl2 Switch Fan Tray (J9831A) I/O ports and slots 12 open module slots Supports a maximum of 288 autosensing 10/100/1000 ports or 288 SFP ports or 96 SFP+ ports or 96 HPE Smart Rate Multi-Gigabit or 24 40GbE ports, or a combination Power supplies 4 power supply slots 2 minimum power supplies required (ordered separately) Fan tray includes: 1 x J9832A 1 fan tray slot Physical characteristics Dimensions 17.5(w) x 17.75(d) x 12.1(h) in (44.45 x 45.09 x 30.73 cm) (7U height) Weight 38.1 lb (17.28 kg) Memory and processor v3 Gigabit module Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal v2 Gigabit module ARM11 @ 450 MHz; Packet buffer size: 18 MB internal v3 10G module Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal v2 10G module ARM11 @ 550 MHz; Packet buffer size: 18 MB internal v3 40G module Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal Management Module Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB Page 24

Technical Specifications DDR3 SODIMM Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); horizontal surface mounting only Performance 1000 Mb Latency < 2.8 µs (FIFO 64-byte packets) IPv6 Ready Certified 10 Gbps Latency < 1.8 µs (FIFO 64-byte packets) 40 Gbps Latency < 1.5 μs (FIFO 64-byte packets) Throughput up to 1142.8 Mpps Routing/Switching 1920 Gbps capacity Switch fabric speed 2030 Gbps Routing table size 10000 entries (IPv4), 5000 entries (IPv6) MAC address table size 64000 entries Environment Operating temperature 32 F to 113 F (0 C to 45 C); 0 C to 40 C with J8177C transceiver installed, 0 C to 35 C with FIPS Opacity Shield installed Operating relative 15% to 95% @ 113 F (45 C), noncondensing humidity Nonoperating/Storage -40 F to 158 F (-40 C to 70 C) temperature Nonoperating/Storage 15% to 95% @ 149 F (65 C), noncondensing relative humidity Altitude up to 10,000 ft (3 km) Acoustic Power: 49 db, Pressure: 35.7 db ISO 7779, ISO 9296 Electrical characteristics Frequency 50/60 Hz 80plus.org Certification Description Maximum heat dissipation Voltage NOTES Gold Does not come with power supply. Four power supply slots are available; three different power supplies are available. See power supply products for additional specifications. 4900 BTU/hr (5169 kj/hr), (max. non-poe); 7400 BTU/hr (7,807 kj/hr) (max. using PoE) 100-127 / 200-240 VAC, rated Heat dissipation does not include heat dissipated by the PoE-powered devices themselves. When more than four power cords are installed in a 5412R zl2 switch chassis, additional installation requirements are needed. Refer to the HPE 5400R zl2 Switches Quick Setup Guide and Safety/Regulatory Information manual for details. Safety CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950 Emissions FCC part 15 Class A; EN 55022/CISPR 22 Class A Immunity EN EN 55024, CISPR 24 ESD IEC 61000-4-2; 4 kv CD, 8 kv AD; HPE ENV. 765.002 Radiated IEC 61000-4-3; 3 V/m EFT/Burst IEC 61000-4-4; 1.0 kv (power line), 0.5 kv (signal line) Surge IEC 61000-4-5; 1 kv/2 kv AC, 1kV signal, 0.5 kv DC Conducted IEC 61000-4-6; 3 Vrms Power frequency IEC 61000-4-8; 1 A/m, 50 or 60 Hz magnetic field Voltage dips and IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods Page 25

Technical Specifications Management NOTES Services interruptions Harmonics EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61000-3-3 Aruba AirWave Network Management; IMC Intelligent Management Center; Command-line interface; Web browser; Configuration menu; Out-of-band management (RJ-45 Ethernet); SNMP manager; Outof-band management (serial RS-232c or micro usb) Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C). Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. HP 5406R-44G-PoE+/2SFP+ (No PSU) v2 zl2 Switch (J9823A) Included accessories 1 Aruba 5400R zl2 Management Module (J9827A) 1 Aruba 5406R zl2 Switch Fan Tray (J9831A) 1 HPE 24-port Gig-T PoE+ v2 zl Module (J9534A) 1 HPE 20-port Gig-T PoE+/2-port 10GbE SFP+ v2 zl Module (J9536A) I/O ports and slots 44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto MDIX; Duplex: 10BASE- T/100BASE-TX: half or full; 1000BASE-T: full only 2 open 10GbE SFP+ transceiver slots 4 open module slots Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination Power supplies 2 power supply slots 1 minimum power supply required (ordered separately) Fan tray includes: 1 x J9831A 1 fan tray slot Physical characteristics Dimensions 17.5(w) x 17.75(d) x 6.9(h) in (44.45 x 45.09 x 17.53 cm) (4U height) Weight 28.11 lb (12.75 kg) Memory and processor v3 Gigabit module Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal v2 Gigabit module ARM11 @ 450 MHz; Packet buffer size: 18 MB internal v3 10G module Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal v2 10G module ARM11 @ 550 MHz; Packet buffer size: 18 MB internal v3 40G module Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal Management Module Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); horizontal surface mounting only Performance 1000 Mb Latency < 2.8 µs (FIFO 64-byte packets) IPv6 Ready Certified 10 Gbps Latency < 1.8 µs (FIFO 64-byte packets) 40 Gbps Latency < 1.5 μs (FIFO 64-byte packets) Throughput up to 571.4 Mpps Routing/Switching 960 Gbps capacity Switch fabric speed 1015 Gbps Routing table size 10000 entries (IPv4), 5000 entries (IPv6) Page 26