Extract from the online catalog IBS RT 24 BK RB-T This item is no longer available. Should you have any questions, please contact our Sales Team. Order No.: 2750484 INTERBUS-ST bus terminal module, 24 V DC, 9-pos. D-SUB, IP20 protection, with remote bus branch, without plug connector set Commercial data EAN 4017918140076 Pack 1 pcs. Customs tariff 85389091 Weight/Piece 0.22 KG http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Product description INTERBUS-RT bus terminal module with remote bus branch The new INTERBUS RT bus terminal module with remote bus branch makes it possible for users to set up inexpensive tree structures thanks to its T-coupler function. In conjunction with the Generation 4 controller boards, it is possible to define up to 16 levels. This structure enables users to optimize their cabling routes to an even greater extent. Configuring a system with these INTERBUS modules not only produces benefits when it comes to cable routing, but also with regard to the functional requirements of the application. For example, individual bus segments can be disabled or enabled, or branch lines can be implemented for flexible cable conduit applications. The INTERBUS module consequently makes a significant contribution to increasing flexibility and simplifying conversion and maintenance work by starting up individual parts of a system. This makes it easy to expand and modify systems. These easy-to-use diagnostic capabilities significantly simplify startup and any troubleshooting in the control cabinet. The IBS RT 24 BK RB-T module is also equipped with a reconfiguration input and an alarm output. The small format means the bus terminal module can be installed directly in extremely small on-site terminal boxes. The device is used wherever a remote bus branch is to be established and no additional inputs/outputs are required. The INTERBUS IBS OPTO SUB and OPTOSUB-PLUS connectors are available for converting the data signals from copper cables to fiber optics. Technical data Interfaces Interface INTERBUS remote bus / INTERBUS remote bus branch Type of connection D-SUB-9 (2 x) PHOENIX CONTACT Deutschland GmbH Page 1 / 5
Power supply Typical current consumption I/O voltage Peripherals voltage range 200 ma 24 V DC 5 % (ripple) 19.2 V DC... 30 V DC Electrical isolation Test section Between incoming/outgoing remote bus 500 V AC 50 Hz 1 min Supply voltages / Remote bus 500 V AC 50 Hz 1 min Between supply voltages 500 V AC 50 Hz 1 min INTERBUS data Maximum distance to the next remote bus device Distance from next remote bus device in remote bus branch 400 m 400 m Local functions Local functions Reconfiguration input 2-pos., electrically isolated Alarm output: Floating relay contact (PDT) General data Width Height Length Weight 75 mm 146 mm 44 mm 180 g Certificates / Approvals Certification CUL Listed, GOST, UL Listed PHOENIX CONTACT Deutschland GmbH Page 2 / 5
Drawings Connection diagram PHOENIX CONTACT Deutschland GmbH Page 3 / 5
Dimensioned drawing PHOENIX CONTACT Deutschland GmbH Page 4 / 5
Address PHOENIX CONTACT Deutschland GmbH Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 12000 Fax +49 5235 3 41200 http://www.phoenixcontact.de 2010 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Deutschland GmbH Page 5 / 5