DATA SHEET DEPRECATED - PCM DEIF A/S Frisenborgvej DK-800 Skive Tel.: +4 64 64 Fax: +4 64 6 info@deif.com www.deif.com Document no.: N/A
AWC 00 PCM data sheet - DEPRECATED. AWC 00 system. System specifications... 2. and Control Modules 2. PCM module specifications... 2.. PCM wiring...6 2..2 PCM terminal specifications... www.deif.com Page 2 of
AWC 00 PCM data sheet - DEPRECATED. AWC 00 system. System specifications The AWC 00 is designed as a highly flexible, modular process controller covering the special demands of wind power plants in terms of reliability, robustness and flexibility. Technical specifications 2 2 6 4 2 4 4 S 6 8 6 S2 L 8 0 4 L2 L N 2 Port 4 2 L L2 L N 4 4 Port Relay Output 8 6 SSI 2 Feedback SSI 4 0 4 48 4 46 4 20 8 6 66 6 64 6 62 6 60 8 2 28 2 26 2 24 2 22 2 6 8 R2 F 20 R COM 2 Digital IN 6 Port 2 0 6 68 6 66 6 64 6 8 Digital IN 0 4 Digital S S2 L 2 20 USB device S2 L2 RS48 2 2 4 2 0 6 68 6 USB host Digital IN 4 S L 6 4 2 0 AWC 00 CAN Port RS-422/48 80 8 6 4 Status Port 0 Error 6 2 0 2 28 2 26 2 24 2 20 CAN 2 RS48 2 40 8 6 4 24 CAN Analogue Eth2 4 SHOR T CT BEFORE DISCONNECTIN G TERMINAL... 6 62 6 60 8 6 4 Eth 22 2 20 8 6 4! 0 Temperature L ink/ac tivity GPM 8 6 4 4 46 4 44 4 42 4 40 8 Digital 44 4 42 4 40 Port IFM 2 IFM 8 2 0 8 L ink/ac tivity DIM 4 2 0 4 48 4 46 4 44 4 42 4 DI IN Advanced Wind turbine Controller 2 0 8 6 4 2 4 IOM + 0 8 6 4 2 PCM 2 DEIF F2 Rack 0, Rack, Rack 2, Rack, Rack and Rack 8 All racks have one slot reserved for a PCM x or PDM and a variable number of I/O modules. Default rack sizes The maximum number of I/O modules is indicated in the name of the rack. For example; the rack named Rack 2 has two available slots for I/O modules. Temperature Climate Altitude Vibration Shock Bump www.deif.com Operating: -40 to 0 C Storage: -40 to 8 C Reference: to 0 C All modules are conformal coated, hence protected against moisture, mold, dust, corrosion and other environmental stresses. C % relative humidity, condensing Up-to 4,000 m without de-rating For deployment above 4,000 m contact Product Management to.2 Hz: 6 mmpeak-peak.2 to 0 Hz: 2. g to.2 Hz: 2.8 mmpeak-peak.2 to 00 Hz:.0 g 0 g, ms, half sine Tested with impacts in each direction in all axes. A total of 8 impacts per test. 2 g, 6 ms, half sine,000 bumps in each direction. 2 directions in each axis. A total of 6,000 bumps. IEC 60068-2- IEC 60068-2-2 IEC 60068-2-0, test Db IEC 60068-2-6, DNV C IEC 60068-2-6, DNV A IACS E0 IEC 60068-2-2, test Ea IEC 60068-2-2, test Ea Page of
AWC 00 PCM data sheet - DEPRECATED Technical specifications EMC/CE Electromagnetic compatibility (EMC) EN 6000-6-/2//4 Electrostatic discharge (ESD): Contact:.2 kv Air:.6 kv Radiated E-field emission: 0 to 20 MHz: 40 db (μv/m) 20 to,000 MHz: 4 db (μv/m) to GHz: 0 db (μv/m) peak to GHz: 0 db (μv/m) average to 6 GHz: 4 db (μv/m) peak to 6 GHz: 4 db (μv/m) average EN 6000-4-2 Conducted emission: IEC 602-26 Fast transients (burst): : 2.4 kv p Signal:.2 kv p Slow transients (surge): AC power: DM 2 kv p, CM 4 kv p DC power: DM kv p, CM 2 kv p Signal and I/O: DM kv p, CM 2 kv p Frequency input: DM kv p, CM.2 kv p RF E-field (electric) immunity: 80 to 2,000 MHz: 2 V/m 2 to GHz: 0 V/m IEC 6000-6- (not PCM 2), IEC 6000-6-4, IEC 602-26 IEC 602-22-4, GL, LR, DNV, EN 6000-4-4 IACS E0, IEC60, EN 604, IEC 602-26, EN 6000-4- IEC 602-26, EN604, GL, LR, BV, DNV, EN 6000-4- RF conducted immunity IEC 602-26, EN 604, GL, 0. to 80 MHz: 2 V RMS LR, BV, DNV, EN 6000-4-6 frequency H-field (magnetic) immunity: Field: 400 A/m Installation (over-voltage) category III, 600 V, pollution degree 2. EN 600- IEC 600, EN 6000-4-8 Protection class IP0 IEC/EN 602 Material UL/cUL Listing Aluminium case and cover plates. All plastic parts are selfextinguishing. UL applications: Maximum surrounding temperature 60 C. Use min. /0 C copper conductors only. Terminal tightening torque - lb-in or equivalent. Use AWG 0-2 or equivalent wire size. To be installed in accordance with the NEC (United States) or the CEC (Canada). UL4 (V) UL/cUL Listed to UL08 & CSA C22.2 No. 42-M8 www.deif.com Page 4 of
8 6 4 Serial IN Pri Sec AWC 00 PCM data sheet - DEPRECATED 2. and Control Modules 2. PCM module specifications DEPRECATED, use PCM 2. The PCM module offers a powerful CPU for C/C++ and CODESYS applications. and control module PCM Port Status Ethernet Service -4: : Service 6: Download Module select Interfaces Service Processor Operating system PLC run-time Memory Storage Storage (removable) Programming Size consumption 0 W internal power supply with redundant inputs and 0 ms full rack power fail protection and internal safe-shutdown UPS Supporting direct battery and/or UPS supply Input level: 24 V, +0 %, -2 % (8 to 6 V) Input (IN): High: to 6 V or - to -6 V with reference to common Low: to - V with reference to common Impedance: Approximately 4 kω Isolation: Optically isolated from other potentials, 0 V 0 Hz Output (): Digital relay output, 24 V, maximum A resistive x (), electrical: 00Base-TX, 8P8C ( RJ4 ), shielded Cat, >0.6 µm gold plating x (Port ), optical: 00Base-FX, SC connectors, multimode fibre 62. µm, OM x Ethernet port (Ethernet): 00Base-TX, 8P8C ( RJ4 ), shielded Cat, >0.6 µm gold plating x RS-422 port: ANSI/TIA/EIA-422-B: 4.8 to 460.8 kbit/s (full duplex) USB 2.0, console on virtual COM port,.2 kbit/s (8/N/), no flow control MHz industrial grade 2 bit QUICC II Pro CPU supporting ms control loop Embedded real-time DEIF OS based on Linux. Fail-safe remote OS and I/O firmware update. fail-safe, self-monitoring and error-correcting file system. Start-up time: <0 s (from power on to customer application start-up). CODESYS version (optional) Industrial grade DDR2 RAM: 28 MB Application and data storage, non-volatile: Industrial grade NAND: 28 MB Industrial grade FRAM: 28 kb (power loss protected) Industrial grade SD card: 2 MB, 2, 4, 8, 6 GB (optional) ANSI C/C++ IEC 6- (IL, SFC, FBD, ST, LD) (optional) 8 TE (40.64 mm) Maximum W www.deif.com Page of
8 6 4 Serial IN Pri Sec AWC 00 PCM data sheet - DEPRECATED 2.. PCM wiring PCM input Primary input 6 + Supply - Supply Secondary input 0 + Supply - Supply Digital input 8 PNP/NPN +/- -/+ 8P8C ( RJ4 ) connector, shielded Cat, >0.6 µm gold plating 2 Relay output + Supply - Supply Port SC duplex connector, multimode fibre 62. μm, OM Status Ethernet Ethernet 8P8C ( RJ4 ) connector, shielded Cat, >0.6 µm gold plating Serial RS-422* 4 6 8 R XD - A RS-422 GND (optional) R XD - B T XD - A RS-422 GND T XD - B * Bias and end resistor configurable in software Service Service interface USB Standard-B plug -4: : Service 6: Download Module select www.deif.com Page 6 of
AWC 00 PCM data sheet - DEPRECATED 2..2 PCM terminal specifications Terminal Description ECAT P Port 2 ECAT P2 - - 4 Ethernet Ethernet Service USB Service interface 6 supply + (Pri) Primary power supply input, 24 V supply - (Pri) Primary power supply input, GND 8 IN chain digital input IN chain digital input 0 supply + (Sec) Secondary power supply input, 24 V supply - (Sec) Secondary power supply input, GND 2 chain relay output chain relay output 4 Rx-A RS-422 positive receive signal Rx GND RS-422 receive shield 6 Rx-B RS-422 negative receive signal Tx-A RS-422 positive transmit signal 8 Tx GND RS-422 transmit shield Tx-B RS-422 negative transmit signal www.deif.com Page of