Date: Quantity: Company: Project: Monochrome Tube CW Monochrome Tube CW is an IP66-rated slim LED tube for any wall or façade accent-lighting. Available in 500mm, 995mm, and 1490mm lengths, the simple but robust construction, allows up to 24, 12, or 8 Tubes (12m) to be daisy chained using a single power supply. Product Specifications Models 500mm (48 LEDs) 995mm (96 LEDs) 1490mm (144 LEDs) Light Source Color Temperature Luminous Flux 1 Efficacy 1 Cover Lens Housing Dimensions (L x W x H) High intensity SMT white LEDs 5700 K (Cold White) 260.37 lm (995mm Tube) 34.7 lm/w (995mm Tube) PC Diffuser (CAST-UV protected) Aluminium housing, PC front diffuser 500mm x 17mm x 20mm 19.7 x 0.67 x 0.79 995mm x 17mm x 20mm 39.2 x 0.67 x 0.79 1490mm x 17mm x 20mm 58.7 x 0.67 x 0.79 Weight 270g/0.59lbs 520g/1.14lbs 750g/1.65lbs Regulatory Listing & Safety Approval Operating Temperature Storage Temperature Environment Humidity CE, cetlus 30 C to +50 C / 22 F to +122 F 40 C to +70 C / 40 F to +158 F Outdoor (IP66), suitable for coastal environments 0 to 90% non-condensing Electrical Specifications Input Voltage 48V DC Current Rating 76mA max. 152mA max. 227mA max. Power Consumption 3.7W max. 7.5W max. (approx. 7.5W per tube meter) 11W max. System Specifications Power / Data Interface N/A Control Optional Dimming with DMX2PWM Dimmer Power Supply LED Engine 100W 48V Indoor, LED Engine 100W 48V Outdoor (see Ordering page for details) Addressing Options N/A 1. Based on photometric data and maximum power consumption of Monochrome Tube CW 995mm LED CHARACTERISTICS Because LEDs are semiconductor devices, their performances are subject to inherent variability commonly found in semiconductor industry. To improve consistency in performance across the same product, LED manufacturers sort LEDs into bins according to different preset parameters, such as forward driving voltage, illumination, etc. Whereas binning is a sorting function, it is not a correction process. Inherent variability in the manufacturing process results always in different binning distributions according to different production lots. Traxon uses automatically binned LEDs on its products, thereby minimizing output variations within the model range. As with all electronic devices, LED output degrades over time a term called lumen depreciation. This also explains why it is nearly impossible to expect photometric performances of two LED products with different service life spans to be the same. The rate of LED degrade is a complicate function of many factors such as operating efficiency, duration of continuous operation, and more significantly, environmental conditions (ambient temperature for example). If allowed working under optimal operating temperature range and with good ventilation, LED devices enjoy long service lives over conventional light sources. When using/installing LED devices, care should be taken to ensure that the devices will operate within the operating conditions specified in respective product literature. Lumen measurement compiles with LM-79-08 standard. Lumen maintenance is calculated based on LM-80 compliant measurement. Product Specification 04/15 V1.6 1 of 7
Monochrome Tube CW Photometrics Candela Distribution Cd: 0 16.87 33.73 90 75 Light Output Color Luminous Flux (lumens) White 260.37 50.60 60 67.46 84.33 0 15 30 45 Illuminance at a Distance Center Beam LUX Beam Width V H 2m 21.08 6.9m 6.2m 4m 5.27 13.9m 12.5m 6m 2.34 20.8m 18.7m 8m 1.32 27.7m 25.0m 10m 0.84 34.7m 31.2m 12m 0.59 41.6m 37.5m For feet multiply by 3.28 Vert.Spread: 120.1 Horiz.Spread: 114.8 For fc divide by 10.7 IES and LDT files are available for download from the Traxon website. Product Specification 04/15 V1.6 2 of 7
Monochrome Tube CW Dimensions 500mm, 995mm, 1490mm / 19.7, 39.2, 58.7 See DETAIL A Center mounting stud (1490mm version only) OPTIONAL MOUNTING BRACKET Mounting bracket (not included) Center mounting bracket (for 1490mm version only) DETAIL A with mounting stud 21.1mm / 0.83 17mm / 0.67 25mm / 0.98 M6 x 15mm / 0.59 105mm / 4.13 ref. Mounting stud 150mm / 5.91 DETAIL A with mounting bracket 11.10mm/0.44 25mm/0.98 Mounting bracket 28mm/1.10 105mm/4.13 ref. Product Specification 04/15 V1.6 3 of 7
Monochrome Tube CW Mounting Mounting Stud Method 1 Mounting Bracket Method Rotate mounting stud anti-clockwise and remove from housing Rotate mounting stud anti-clockwise and remove from housing Rotate mounting stud anti-clockwise and remove from housing 2 Assemble mounting bracket as shown Assemble mounting bracket as shown 28mm/1.10 25mm/0.98 Assemble mounting bracket as shown 30mm/1.18 20.1mm/0.79 Mounting Bracket (see Ordering page for details) 28mm/1.10 25mm/0.98 30mm/1.18 20.1mm/0.79 Product Specification 04/15 V1.6 4 of 7
Monochrome Tube CW System Diagram Typical wiring with T-Starter cable and Single Starter cable AC 110V/220V 50/60Hz Connector End Cap IP66 END CAP SEAL ON LAST TUBE LED Engine 100W 48V Indoor INDOOR OUTDOOR 20 meters max. LED Engine to last Tube Starter Cable AWG 20 x 2C Terminal block (not included) T-Starter Cable Option LED Engine 100W 48V Indoor AWG 18 x 2C, 300mm AWG 18 x 2C INDOOR OUTDOOR T-Starter Cable at center: Total lead cable length: 14 meters max. if maximum number of Tubes connected T-STARTER CABLE AWG 20 x 2C, 0.6m Single Starter Cable Option IP66 CONNECTOR SEAL Total Tube length: 12 meters max. Max. 24 x 500mm tube or 12 x 995mm tube or 8 x 1490mm tube or a combination of different lengths totalling less than 12 meters IP66 CONNECTOR SEAL Connector End Cap IP66 END CAP SEAL ON LAST TUBE AC 110V/220V 50/60Hz Product Specification 04/15 V1.6 5 of 7
Monochrome Tube CW System Diagram Monochrome Tube with optional DMX2PWM Dimmer Max. 12m of tube per DMX2PWM Dimmer AC 110V/220V 50/60Hz INDOOR OUTDOOR Starter Cable AWG 20 x 2C, 10m DMX2PWM Dimmer Example of max. number of fixtures per DMX2PWM Dimmer: 1 output: 12 x 1m Tube or 8 x 1.5m Tubes 3 outputs: 4 x 1m Tube or 2 x 1.5m Tubes (per output) Controllers Butler S2 Butler S2 DMX/RDM Output Engine LED Engine 100W 48V Indoor CONTROLLER 512 DMX Channels per output IP66 CONNECTOR SEAL 20 meters max. LED Engine to last Tube Connector End Cap IP66 END CAP SEAL ON LAST TUBE Product Specification 04/15 V1.6 6 of 7
Monochrome Tube CW Ordering Fixtures TU.DM.0060001 Monochrome Tube Diffused 500 CW AA553770155 TU.DM.0160001 Monochrome Tube Diffused 995 CW AA553720155 TU.DM.0260001 Monochrome Tube Diffused 1490 CW AA553700155 TX Connect TE.CU.0000003 Monochrome Tube T-Starter Cable (Open Wire), 0.6m AA5538701FO TE.CU.0000004 Monochrome Tube Starter Cable (Open Wire), 10m AA438750055 TU.AC.0100200 Monochrome Tube Interconnection Cable, 1.5m AA438740055 TU.AC.0100100 Connector End Cap AA438590055 Optional Accessories TU.AC.0100400 Monochrome Tube Mounting Bracket (25mm), 2pcs AA556500055 TX Control 160125 DMX2PWM 3CH Dimmer AA623900135 EN.BU.0000001 Butler S2 AA624080072 TX Power TE.CU.0000002 LED Engine 100W Indoor 48V AA438610055 PS.CU.0000008 LED Engine 100W Outdoor 48V AA766150055 Product Specification 04/15 V1.6 7 of 7
Date: Quantity: Company: Project: Monochrome Tube WW Monochrome Tube WW is an IP66-rated slim LED tube for any wall or façade accent-lighting. Available in 500mm, 995mm, and 1490mm lengths, the simple but robust construction, allows up to 24, 12, or 8 Tubes (12m) to be daisy chained using a single power supply. Product Specifications Models 500mm (48 LEDs) 995mm (96 LEDs) 1490mm (144 LEDs) Light Source Color Temperature Luminous Flux 1 Efficacy 1 Cover Lens Housing Dimensions (L x W x H) High intensity SMT white LEDs 2700 K (Warm White) 210.52 lm (995mm Tube) 28.1 lm/w (995mm Tube) PC Diffuser (CAST-UV protected) Aluminium housing, PC front diffuser 500mm x 17mm x 20mm 19.7 x 0.67 x 0.79 995mm x 17mm x 20mm 39.2 x 0.67 x 0.79 1490mm x 17mm x 20mm 58.7 x 0.67 x 0.79 Weight 270g/0.59lbs 520g/1.14lbs 750g/1.65lbs Regulatory Listing & Safety Approval Operating Temperature Storage Temperature Environment Humidity CE, cetlus 30 C to +50 C / 22 F to +122 F 40 C to +70 C / 40 F to +158 F Outdoor (IP66), suitable for coastal environments 0 to 90% non-condensing Electrical Specifications Input Voltage 48V DC Current Rating 76mA max. 152mA max. 227mA max. Power Consumption 3.7W max. 7.5W max. (approx. 7.5W per tube meter) 11W max. System Specifications Power / Data Interface N/A Control Optional Dimming with DMX2PWM Dimmer Power Supply LED Engine 100W 48V Indoor, LED Engine 100W 48V Outdoor (see Ordering page for details) Addressing Options N/A 1. Based on photometric data and maximum power consumption of Monochrome Tube WW 995mm LED CHARACTERISTICS Because LEDs are semiconductor devices, their performances are subject to inherent variability commonly found in semiconductor industry. To improve consistency in performance across the same product, LED manufacturers sort LEDs into bins according to different preset parameters, such as forward driving voltage, illumination, etc. Whereas binning is a sorting function, it is not a correction process. Inherent variability in the manufacturing process results always in different binning distributions according to different production lots. Traxon uses automatically binned LEDs on its products, thereby minimizing output variations within the model range. As with all electronic devices, LED output degrades over time a term called lumen depreciation. This also explains why it is nearly impossible to expect photometric performances of two LED products with different service life spans to be the same. The rate of LED degrade is a complicate function of many factors such as operating efficiency, duration of continuous operation, and more significantly, environmental conditions (ambient temperature for example). If allowed working under optimal operating temperature range and with good ventilation, LED devices enjoy long service lives over conventional light sources. When using/installing LED devices, care should be taken to ensure that the devices will operate within the operating conditions specified in respective product literature. Lumen measurement compiles with LM-79-08 standard. Lumen maintenance is calculated based on LM-80 compliant measurement. Product Specification 04/15 V1.6 1 of 7
Monochrome Tube WW Photometrics Candela Distribution Light Output Cd: 0 13.68 27.36 90 75 Color Luminous Flux (lumens) White 210.52 41.04 60 54.72 68.40 0 15 30 45 Illuminance at a Distance Center Beam LUX Beam Width V H 2m 17.08 6.9m 6.2m 4m 4.27 13.8m 12.5m 6m 1.90 20.7m 18.7m 8m 1.07 27.6m 25.0m 10m 0.68 34.5m 31.2m 12m 0.47 41.4m 37.4m For feet multiply by 3.28 Vert.Spread: 119.8 Horiz.Spread: 114.7 For fc divide by 10.7 IES and LDT files are available for download from the Traxon website. Product Specification 04/15 V1.6 2 of 7
Monochrome Tube WW Dimensions 500mm, 995mm, 1490mm / 19.7, 39.2, 58.7 See DETAIL A Center mounting stud (1490mm version only) OPTIONAL MOUNTING BRACKET Mounting bracket (not included) Center mounting bracket (for 1490mm version only) DETAIL A with mounting stud 21.1mm / 0.83 17mm / 0.67 25mm / 0.98 M6 x 15mm / 0.59 105mm / 4.13 ref. Mounting stud 150mm / 5.91 DETAIL A with mounting bracket 11.10mm/0.44 25mm/0.98 Mounting bracket 28mm/1.10 105mm/4.13 ref. Product Specification 04/15 V1.6 3 of 7
Monochrome Tube WW Mounting Mounting Stud Method 1 Mounting Bracket Method Rotate mounting stud anti-clockwise and remove from housing Rotate mounting stud anti-clockwise and remove from housing Rotate mounting stud anti-clockwise and remove from housing 2 Assemble mounting bracket as shown Assemble mounting bracket as shown 28mm/1.10 25mm/0.98 Assemble mounting bracket as shown 30mm/1.18 20.1mm/0.79 Mounting Bracket (see Ordering page for details) 28mm/1.10 25mm/0.98 30mm/1.18 20.1mm/0.79 Product Specification 04/15 V1.6 4 of 7
Monochrome Tube WW System Diagram Typical wiring with T-Starter cable and Single Starter cable AC 110V/220V 50/60Hz Connector End Cap IP66 END CAP SEAL ON LAST TUBE LED Engine 100W 48V Indoor INDOOR OUTDOOR 20 meters max. LED Engine to last Tube Starter Cable AWG 20 x 2C Terminal block (not included) T-Starter Cable Option LED Engine 100W 48V Indoor AWG 18 x 2C, 300mm AWG 18 x 2C INDOOR OUTDOOR T-Starter Cable at center: Total lead cable length: 14 meters max. if maximum number of Tubes connected T-STARTER CABLE AWG 20 x 2C, 0.6m Single Starter Cable Option IP66 CONNECTOR SEAL Total Tube length: 12 meters max. Max. 24 x 500mm tube or 12 x 995mm tube or 8 x 1490mm tube or a combination of different lengths totalling less than 12 meters IP66 CONNECTOR SEAL Connector End Cap IP66 END CAP SEAL ON LAST TUBE AC 110V/220V 50/60Hz Product Specification 04/15 V1.6 5 of 7
Monochrome Tube WW System Diagram Monochrome Tube with optional DMX2PWM Dimmer Max. 12m of tube per DMX2PWM Dimmer AC 110V/220V 50/60Hz INDOOR OUTDOOR Starter Cable AWG 20 x 2C, 10m DMX2PWM Dimmer Example of max. number of fixtures per DMX2PWM Dimmer: 1 output: 12 x 1m Tube or 8 x 1.5m Tubes 3 outputs: 4 x 1m Tube or 2 x 1.5m Tubes (per output) Controllers Butler S2 Butler S2 DMX/RDM Output Engine LED Engine 100W 48V Indoor CONTROLLER 512 DMX Channels per output IP66 CONNECTOR SEAL 20 meters max. LED Engine to last Tube Connector End Cap IP66 END CAP SEAL ON LAST TUBE Product Specification 04/15 V1.6 6 of 7
Monochrome Tube WW Ordering Fixtures TU.DM.0070001 Monochrome Tube Diffused 500 WW AA604180055 TU.DM.0170001 Monochrome Tube Diffused 995 WW AA604190055 TU.DM.0270001 Monochrome Tube Diffused 1490 WW AA604170055 TX Connect TE.CU.0000003 Monochrome Tube T-Starter Cable (Open Wire), 0.6m AA5538701FO TE.CU.0000004 Monochrome Tube Starter Cable (Open Wire), 10m AA438750055 TU.AC.0100200 Monochrome Tube Interconnection Cable, 1.5m AA438740055 TU.AC.0100100 Connector End Cap AA438590055 Optional Accessories TU.AC.0100400 Monochrome Tube Mounting Bracket (25mm), 2pcs AA556500055 TX Control 160125 DMX2PWM 3CH Dimmer AA623900135 EN.BU.0000001 Butler S2 AA624080072 TX Power TE.CU.0000002 LED Engine 100W Indoor 48V AA438610055 PS.CU.0000008 LED Engine 100W Outdoor 48V AA766150055 Product Specification 04/15 V1.6 7 of 7