Training Schedule September 2017 - March 2018
Rockwell Automation on the Move is coming to Milwaukee, WI. Come learn how smart, safe and sustainable solutions can turn your marketplace challenges into advantages. Network with peers and subject matter experts Learn from technical sessions, hands-on labs and workshops Explore the latest technology from Rockwell Automation and our PartnerNetwork Members Mark your calendar to join us in Milwaukee and watch for more details on how to register for the event. May 16-17, 2018 The Wisconsin Center Milwaukee, WI
CONTROLLERS Studio 5000 Logix Designer Level 1: CompactLogix Fundamentals & Troubleshooting (CCP298) Upon completion of this course, you should be able to troubleshoot a previously operational CompactLogix system and restore normal operation. All Logix5000 systems use the same control engine; therefore, tasks are similar. You will see applicable references for other systems. 10/9/17-10/13/17 Rockwell Automation - Burr Ridge, IL-Cubs $2,475 11/6/17-11/10/17 Rockwell Automation - Burr Ridge, IL-Cubs $2,475 2/26/18-3/2/18 Rockwell Automation - Burr Ridge, IL-Cubs $2,475 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals (CCP146) The course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000 systems. You will be introduced to basic Logix5000 concepts and terminology, and you will be exposed to Logix5000 system hardware, including hands-on experience with the ControlLogix platform. 9/12/17-9/13/17 Rockwell Automation - Milwaukee, WI $1,274 12/5/17-12/6/17 Revere Electric - West Allis, WI $1,274 3/6/18-3/7/18 Rockwell Automation - Burr Ridge, IL-Cubs $1,274 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting (CCP153) Upon completion of this course, you will be able to troubleshoot a previously operational ControlLogix system and restore normal operation. This course adds to your skill set by introducing new tasks such as connecting to a network, interpreting project execution, editing ladder logic online, and more. 10/31/17-11/03/17 Rockwell Automation - Burr Ridge, IL-Cubs $2,090 02/13/18-02/16/18 Rockwell Automation - Burr Ridge, IL-Cubs $2,090 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming (CCP151) After completing this course, you should be able to program basic ladder logic instructions for Logix5000 controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. You will have an opportunity to use the Studio 5000 Logix Designer application to perform basic software tasks to meet the requirements of a given functional specification. In addition, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control. 11/20/17-11/21/17 Rockwell Automation - Burr Ridge, IL-Cubs $1,274 12/7/17-12/8/17 Revere Electric - West Allis, WI $1,274 3/8/18-3/9/18 Rockwell Automation - Burr Ridge, IL-Cubs $1,274
CONTROLLERS (Continued) Studio 5000 Logix Designer Level 3: Basic Ladder Logic Interpretation (CCCL21) This course is a skill-building course that provides you with a more detailed understanding of Studio 5000 Logix Designer ladder logic instructions and terminology. This course also provides you with the resources and hands-on practice required to interpret ladder logic instructions for any Logix5000 controller. 9/14/17-9/15/17 Rockwell Automation - Milwaukee, WI $1,274 Studio 5000 Logix Designer Level 3: Project Development (CCP143) This course builds upon your knowledge of common controller terms and operation and your experience with basic ladder logic programming. You can gain a deeper understanding of project development tasks that are common to all Logix5000 controllers. Such tasks include organizing tasks and routines, organizing controller data, configuring modules, and sharing data. You will also use producer/consumer technology for multicasting to input and output devices, sharing data between controllers, and controlling remote I/O. 12/12/17-12/15/17 Rockwell Automation - Burr Ridge, IL-Cubs $2,090 3/20/18-3/23/18 Rockwell Automation - Burr Ridge, IL-Cubs $2,090 Studio 5000 Logix Designer Level 4: Function Block Programming (CCP152) This course is a skill-building programming course that provides you with an understanding of Studio 5000 Logix Designer function block diagrams and terminology. This course also provides you with the resources and hands-on practice required to efficiently program a Logix5000 controller using function block diagrams. 01/09/18-01/10/18 Rockwell Automation - Burr Ridge, IL-Cubs $1,274 PLC-5 & RSLogix 5 Maintenance & Troubleshooting (CCP412) After completing this course, you should be able to program basic ladder logic instructions for Logix5000 controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. You will have an opportunity to use the Studio 5000 Logix Designer application to perform basic software tasks to meet the requirements of a given functional specification. In addition, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control. 10/24/17-10/27/17 Rockwell Automation - Burr Ridge, IL-Cubs $2,090
CONTROLLERS (Continued) SLC 500 & RSLogix 500 Programming (CCPS41) In this course, you will create a program, step-by-step, to meet the requirements of a given functional specification. As you build the project, you will gain experience that can be applied to your own RSLogix 500 projects. Each lesson in the course is devoted to a step in the programming sequence. Your instructor will present each step and demonstrate the procedure required to complete it. 11/14/17-11/17/17 Rockwell Automation - Burr Ridge, IL-Cubs $2,090 SLC 500 and RSLogix 500 Maintenance and Troubleshooting (CCPS43) This skill-building course provides you with the necessary practice needed to interpret, isolate, and diagnose common hardware problems related to noise, power, and discrete and analog I/O. In troubleshooting scenarios, you will be introduced to basic ladder logic interpretation, which is applied to diagnostic tasks. You will practice these diagnostic skills by tracing through ladder logic instructions in an RSLogix 500 project. An integrated practice of multiple troubleshooting skills completes the training. 12/5/17-12/8/17 Rockwell Automation - Burr Ridge, IL-Cubs $2,090 PLC Basics (AWSSLC500BASIC) Nelson s PLC/EOI Specialists Carmen Pillizzi and Don Goldbach use lectures and labs to familiarize students with the PLC family product line. The workshop covers configuring the hardware and learning basic addressing techniques. Programming and troubleshooting methods using Rockwell Software RSLogix500 are also thoroughly discussed. 10/10/17-10/11/17 Nelson Electric Supply, Racine, WI $595 1/16/18-1/17/18 Nelson Electric Supply, Racine, WI $595 Logix 5000 Programming (AWSLOGIX5000BASIC) We are proud to offer this two day course that provides students with a basic understanding of RSLogix5000 ladder logic instructions and terminology. We will instruct and provide the students hands-on practice to efficiently program a Logix5000 controller while using the RSLogix5000 programming software. Students will gain a better understanding of tasks, programs, and routines function as well as creating tags. There will also be labs using Local and Distributed I/O over Ethernet demonstrating the advantages of the Producer/ Consumer model and enhanced module capabilities. Additional labs include Processor to Processor communications, User Defined Data Types, and Add On Instructions. We also cover the basics of Ethernet/IP addressing and 'Flashing' of the Logix hardware. 9/12/17-9/13/17 Nelson Electric Supply, Racine, WI $695 11/7/17-11/8/17 Nelson Electric Supply, Racine, WI $695 2/16/18-2/14/18 Nelson Electric Supply, Racine, WI $695
CONTROLLERS (Continued) PanelView Plus (AWSMFGINT) This next-generation operator interface is capable of displaying animations and information from Rockwell and 3rd party devices. Nelson s Rockwell Software Specialist Eric Heide begins this workshop with a discussion on Rockwell s ViewAnyWare strategy, which encompasses all of your Human-Machine Interface (HMI) needs. Hands-on labs will follow, highlighting the latest PanelView Plus features like trending and recipe management. 9/26/17-9/26/17 Nelson Electric Supply, Racine, WI $295 3/13/18-3/13/18 Nelson Electric Supply, Racine, WI $295 NETWORKS Ethernet/IP Configuration and Troubleshooting (CCP183) This course should prepare you to effectively: configure a Stratix switch (5700, 8000, and/or 8300) to meet a variety of network requirements, assign IP addresses to devices on an EtherNet/IP network using rotary switches and a variety of software, monitor switch performance and status, diagnose and resolve issues with switches and devices on a network. During switch configuration, you will have an opportunity to: configure a switch using both the Device Manager Web Interface and Studio 5000 Logix Designer software, set up one-to-one IP address translation (NAT) for segmenting machine-level network devices from the plant network, secure and limit access to a switch. Once the EtherNet/IP network is up and running, you will monitor diagnostic information using web-based technologies and modify a web server module s data views and tag values. You will resolve issues with communication between devices on a network. You will troubleshoot an EtherNet/IP network s media and components (including the Stratix 5700 switch); run diagnostic tests to resolve system and port issues; and perform common functions such as resetting the switch. 10/3/17-10/5/17 Rockwell Automation - Burr Ridge, IL-Cubs $1,690 1/16/18-1/18/18 Rockwell Automation - Burr Ridge, IL-Hawks $1,690 Essentials of Industrial Ethernet Networks for an OT Professional (CCP182) In this course, you will learn how to verify communications between devices, recognize data transmission types, and differentiate between OSI Model Layer 2 and Layer 3 switching functions. You will also identify the routing process, monitor a switch using Device Manager and CLI commands, and work with IOS configuration files. This course prepares you to more clearly understand key IT terms and concepts for communicating with other professionals on Connected Enterprise projects. 2/27/18-2/28/18 Revere Electric - West Allis, WI $1,274
OEM OEM: ControlLogix, FactoryTalk View ME, Kinetix 6000 and PowerFlex 40 (OEM100) This course provides you with the skills necessary to maintain and troubleshoot: Studio 5000 Logix Designer applications that operate on a ControlLogix platform, FactoryTalk View Machine Edition (ME) applications that run on PanelView Plus terminals, Kinetix 6000 motion systems, PowerFlex 40 drives. 1/15/18-1/19/18 Rockwell Automation - Burr Ridge, IL-Cubs $2,475 POWER CONTROL PowerFlex 750 Series Configuration and Startup (CCA182) Upon completion of this course, given a wired PowerFlex 750-Series drive (PowerFlex 753 or PowerFlex 755) and AC motor, you will be able to start up the drive and configure drive parameters to meet application needs. Throughout the course, you will have the chance to use a variety of hardware and software tools, including: The A6 LCD HIM, DriveExecutive software, DriveExplorer software. After each demonstration, you will be given exercises that offer extensive hands-on practice using a PowerFlex 753 or PowerFlex 755 drive. 10/24/17-10/25/17 Revere Electric - West Allis, WI $1,274 3/6/18-3/7/18 Rockwell Automation - Burr Ridge, IL-Hawks $1,274 PowerFlex 750-Series Maintenance and Troubleshooting (CCA183) This skill-building course introduces concepts and techniques that will assist you in successfully maintaining and troubleshooting a PowerFlex 750-Series (PowerFlex 753 or PowerFlex 755) drive. You will learn how to recognize PowerFlex 750-Series drive hardware and properly wire the drive. You will also learn to diagnose specific faults. Throughout the course, you will have the chance to use a variety of maintenance and troubleshooting tools, including: the A6 LCD HIM, Connected Components Workbench software, and DriveExecutive software. After each demonstration, you will be given exercises that offer extensive hands-on practice using a PowerFlex 753 or PowerFlex 755 drive. 10/26/17-10/27/17 Revere Electric - West Allis, WI $1,274 3/13/18-3/14/18 Rockwell Automation - Burr Ridge, IL-Hawks $1,274 Variable Frequency Drive (AWS1336CONFIG) We use lecture and labs to familiarize students with Allen-Bradley Drives. The Configuration workshop will cover basic AC Drive fundamentals, wiring and start-up, programming, and basic troubleshooting methods. 10/12/17-10/12/17 Nelson Electric Supply, Racine, WI $295
GuardLogix Maintenance & Troubleshooting (SAF-LOG 103) This course will assist you in developing and building a solid foundation with a fundamental knowledge of a GuardLogix system. Upon completion of this course, you should be able to efficiently troubleshoot a previously operational GuardLogix system. You will have the opportunity to develop and practice these skills by learning basic GuardLogix concepts and terminology used with: controller functionality and circuitry, system hardware, RSLogix 5000 software. You will also learn to troubleshoot a GuardLogix project: troubleshooting GuardLogix controller components, troubleshooting and replacing GuardLogix CompactBlock Guard I/O safety modules, and monitoring safety tag values. 10/4/17-10/4/17 Revere Electric - West Allis, WI $850 NFPA 70E 2015 - Electrical Safety and Arc Flash Compliance (SAF-SFT11215) The purpose of this course is to provide the student with an in-depth understanding of the current requirements of NFPA 70E 2015. A complete presentation of the standard will be provided, along with the examples and exercises covering the tables and calculation methods used in the standard for determining Approach Boundaries and selecting proper Personal Protective Equipment (PPE). This course will present the following major topics: NFPA 70E 2015 Standard for Electrical Safety in the Workplace, Safe Electrical Work Practices, Calculating Arc Flash Boundary (Bolted Fault), Selecting Appropriate Personnel Protective Equipment, Calculations based on Bolted Fault Current Short-circuit Current, Power in the Arc, Arc Flash Boundary, Determining Clearing Time, Incident Energy (Arc in Open Air & Arc in a Cubic Box), Calculation Limitations, and Calculations based on Arcing Current (IEEE 1584) Arcing Current, Incident Energy (Normalized and Actual), IEEE 1584 Arc Flash Boundary Calculation. 10/31/17-11/1/17 Rockwell Automation - Burr Ridge, IL-Hawk $866 2/6/18-2/7/18 Rockwell Automation - Burr Ridge, IL-Cubs $866
SAFETY (Continued) Functional Safety for Machinery Technician Certification (TÜV Rheinland) (SAF-TUV0T) The standards regarding functional safety and relevant laws and directives demand that people and organizations performing responsible (accountable) tasks during relevant life cycle phases of a machine must achieve and prove required competencies. In this training, students will learn how current standards dictate the selection, assembly, installation, validation, and maintenance of safety devices and components to reduce hazards from machinery and ensure the safety of people and the environment. Practical examples will demonstrate possibilities regarding machine protection. This training will also cover safety topics, such as: redundancy, testing, distance calculations, assigning required level of risk reduction as PL, monitoring moveable guard positions, and fault avoidance for relevant life cycle phases. * An optional exam is scheduled at the end of the last day. Students must pass this exam and meet all other eligibility requirements to receive the Functional Safety Technician (TÜV Rheinland) certificate. Students may also attend the training without taking the exam. 10/24/17-10/25/17 Rockwell Automation - Burr Ridge, IL-Hawks $1,674 Machinery Safeguarding Basics (AWSMSB) We will discuss topics to ensure that you understand the necessary concepts to provide a safe work environment for your employees. The topics covered will include: safety system categories and how they affect you, risk assessment procedures to determine the proper category needed for your machines, pertinent US and European standards and laws, machine safeguarding components used to comply with the standards, a solid understanding of these concepts can improve productivity, employee morale, and reduce lost work time due to injury. 9/19/17-9/19/17 Nelson Electric Supply, Racine, WI $295 3/6/18-3/6/18 Nelson Electric Supply, Racine, WI $295 VISUALIZATION FactoryTalk View ME & PanelView Plus Programming (CCV204-A) After completing this course, given a computer with FactoryTalk View Machine Edition (ME) software and a PanelView Plus terminal, you should be able to produce an operational application running on the terminal. During class, you will practice the following hands-on skills: prepare a PanelView Plus terminal for operation, create a new application and run it on a terminal, create, configure, and animate graphic objects on graphic displays, configure security for granting/restricting access to certain graphic displays or for rights to perform certain actions, create and configure messages and alarms for alerting operators to changes in a process. 11/7/17-11/10/17 Rockwell Automation - Burr Ridge, IL-Hawk $2,090 2/6/18-2/9/18 Rockwell Automation - Burr Ridge, IL-Cubs $2,090
VISUALIZATION (Continued) FactoryTalk View SE Programming (CCV207) Upon completion of this course, you should be able to organize and develop FactoryTalk View Site Edition (SE) applications. This course provides opportunities for you to work with local FactoryTalk View SE applications. During class, you will have the opportunity to practice the skills used to create an application and build graphic displays. You will learn how to configure alarms and security, trend data, and test your application using a FactoryTalk View SE Client. You will also work with RSLinx Enterprise communications software and the FactoryTalk Diagnostics system. After practicing these skills in a local station application, you will receive a high-level overview of how a network distributed application is created. 12/18/17-12/22/17 Rockwell Automation - Burr Ridge, IL-Cubs $2,475 2/26/18-3/2/18 Rockwell Automation - Burr Ridge, IL-Cubs $2,475 FactoryTalk View ME & PanelView Plus Maintenance and Troubleshooting (CCV209-A) This course provides you with the skills necessary to maintain and troubleshoot FactoryTalk View Machine Edition (ME) applications that run on PanelView Plus terminals. This course provides opportunities to work with both the hardware and software. During class, you will gain the hands-on skills required to prepare a PanelView Plus terminal for operation. You will also work with FactoryTalk View ME software and RSLinx Enterprise software and will practice downloading FactoryTalk View ME applications to a PanelView Plus terminal. 3/13/18-3/14/18 Revere Electric - West Allis, WI $1,274 FactoryTalk Metrics Configuration (FTM) FactoryTalk Metrics is a complete, windows-based solution for the analysis of time-series process and production data. FactoryTalk Metrics provides a set of tools to analyze the performance of production assets. It provides a performance rating, based on the widely used Overall Equipment Effectiveness (OEE) model, for every production asset. The OEE metric provides a simple way to quickly determine if a production asset is performing adequately. In this course, you'll learn to use the reporting, graphing, and querying functionality that make FactoryTalk a complete and very easy-to-use solution for data collection and analysis. 12/5/17-12/7/17 Rockwell Automation - Burr Ridge, IL-Hawks $1,690 3/27/18-3/29/18 Rockwell Automation - Burr Ridge, IL-Cubs $1,690
VISUALIZATION (Continued) FactoryTalk VantagePoint Configuration and Reporting (FTVP) In this course, you will learn various tools to analyze and display data using FactoryTalk VantagePoint and/or FactoryTalk VantagePoint EMI. The course covers how to use the analysis and reporting tools to create trends, XY Plots, Excel reports, and dashboards. You will have an opportunity to use the Portal and configure it to display content in various ways. The course also focuses on extending the model in the product and configuring security. Upon completion of the course, you will be able to utilize many tools and techniques for the display, analysis and reporting of data using FactoryTalk VantagePoint and/or VantagePoint EMI. 11/28/17-11/30/17 Rockwell Automation - Burr Ridge, IL-Cubs $1,690 2/20/18-2/22/18 Rockwell Automation - Burr Ridge, IL-Cubs $1,690 FactoryTalk Historian SE Configuration and Data Collection (RS-FTHSEC) This course will provide you with an overview of the various FactoryTalk Historian tools for collecting data. You will learn how to configure a FactoryTalk Historian Site Edition system. The course also covers how to use Microsoft Excel to create and modify FactoryTalk Historian tags. During the course, you will learn how to apply exception and compression to filter data to be archived. Also, you will be given an opportunity to compare the use of Polled versus Advised data collection modes. Data buffering, layers/methods of redundancy, archive management and backup will also be covered. Upon completion of the course, you will have gained exposure to the many aspects of the FactoryTalk Historian system and be able to configure FactoryTalk Historian to collect data. 1/23/18-1/26/18 Rockwell Automation - Burr Ridge, IL-Hawks $2,090 3/13/18-3/16/18 Rockwell Automation - Burr Ridge, IL-Cubs $2,090 MISCELLANEOUS Electrical Troubleshooting and Motor Controls (EM-206) This course provides information on the concepts associated with systematic troubleshooting of instrumentation systems. Participants use practical application of troubleshooting techniques in exercise scenarios. 1/22/18-1/26/18 Rockwell Automation - Burr Ridge, IL-Cubs $2,475 Electrical Troubleshooting and Motor Controls (EM-206) In today's marketplace, leading companies gain a competitive edge by analyzing web-based dashboards filled with real-time plant floor information. This two-day workshop will start with database fundamentals and collecting plant floor data. Next we will move on to using a Historian, then collecting OEE and performing downtime analysis, and finally configuring a dashboard or portal solution. Lecture and a multitude of labs will enable students to build Rockwell-powered information systems. 10/17/17-10/18/17 Nelson Electric Supply, Racine, WI $595
Registration Information: http://www.revereelectric.com/training-events/calendar or email us at revereservices@revereelectric.com www.revereelectric.com 8807 187th Street Mokena, IL 60448 Phone: (708) 995-3251 975 Weiland Road, ste 210 Buffalo Grove, IL 60089 Phone: (847) 499-6000 1220 Wenzel Road Peru, IL 61354 Phone: (815) 224-1510 1515 Walnut Ridge Drive Hartland, WI 53029 Phone: (262) 369-7100 11540 West Rogers Street West Allis, WI 53227 Phone: (262) 549-1983 926 State Street Racine, WI 53404 Phone: (262) 504-3635