JapanCert 専門 IT 認証試験問題集提供者 http://www.japancert.com 1 年で無料進級することに提供する
Exam : 11gocmu Title : Oracle Database 11g Certified Master Upgrade Exam Vendor : Oracle Version : DEMO Get Latest & Valid 11gocmu Exam's Question and Answers 1 from Japancert.com. 1
NO.1 Using Oracle Enterprise Manager to set SGA pool values manually, for which of the following pools does Oracle EM offer advice to set the value appropriately? (Choose all that apply.) A. DB_CACHE_SIZE B. SHARED_POOL_SIZE C. LARGE_POOL_SIZE D. JAVA_POOL_SIZE E. SGA_MAX_SIZE F. SORT_AREA_SIZE Answer: A,B NO.2 To view the results of a manual SQL Tuning Advisor task, which steps should the DBA take? A. From the Advisor Central home page, select the tuning task from the Advisor Tasks section. B. From Advisor Central, choose SQL Advisors, SQL Tuning Advisors, Manual Tuning Task Results. C. From Advisor Central, choose SQL Advisors, Manual SQL Tuning Advisors, Tuning Task Results. D. Either B or C. Answer: A NO.3 Your organization decided to upgrade the existing Oracle 10g database to Oracle 11g database in a multiprocessor environment. At the end of the upgrade, you observe that the DBA executes the following script: SQL> @utlrp.sql What is the significance of executing this script? A. It performs parallel recompilation of only the stored PL/SQL code. B. It performs sequential recompilation of only the stored PL/SQL code. C. It performs parallel recompilation of any stored PL/SQL as well as Java code. D. It performs sequential recompilation of any stored PL/SQL as well as Java code. Answer: C NO.4 What is the result of this command? RMAN> Report need backup days 3; A. Lists all datafiles created in the last three days that are not backed up. B. Lists all datafiles not recoverable based on the current retention criteria. C. Lists all datafiles not backed up in the last three days. The datafile is not recoverable. D. Lists all datafiles that need to be backed up due to unrecoverable operations. E. Lists all datafiles not backed up in the last three days. It does not imply that the datafile is not recoverable. Answer: E NO.5 What are the recommendations for Oracle Database 11g installation to make it Optimal Flexible Architecture (OFA)-compliant? (Choose all that apply.) A. ORACLE_BASE should be set explicitly. B. An Oracle base should have only one Oracle home created in it. C. Flash recovery area and data file location should be on separate disks. Get Latest & Valid 11gocmu Exam's Question and Answers 2 from Japancert.com. 2
D. Flash recovery area and data file location should be created under Oracle base in a non-automatic Storage Management (ASM) setup. Answer: A,C,D NO.6 Which backup option defines a user-defined name for a backup? A. FORMAT B. NAME C. TAG D. FORMAT U% Answer: C NO.7 View the Exhibit and examine the output. You execute the following RMAN command to perform the backup operation: RMAN> RUN { ALLOCATE CHANNEL c1 DEVICE TYPE disk MAXOPENFILES 8; BACKUP DATABASE FILESPERSET 4; } What is the multiplexing level in the preceding backup process? A. 4 B. 8 C. 7 D. 0 Answer: A Explanation: Section: Backup, Recovery & Recovery Manager (RMAN) The MAXOPENFILES parameter of ALLOCATE CHANNEL or CONFIGURE CHANNEL defines how many datafiles RMAN can read from simultaneously. The basic multiplexing algorithm is as follows: -Number of files in each backup set This number is the minimum of the FILESPERSET setting and the number of files read by each channel. The FILESPERSET default is 64. -The level of multiplexing This is the number of input files simultaneously read and then written into the same backup piece. The level of multiplexing is the minimum of MAXOPENFILES and the number of files in each backup set. The MAXOPENFILES default is 8. Suppose that you back up 12 datafiles with one channel when FILEPERSET is set to 4. The level of multiplexing is the lesser of this number and 8. Thus, the channel simultaneously writes blocks from 4 datafiles into each backup piece. Now suppose that you back up 50 datafiles with one channel. The number of files in each backup set is 50. The level of multiplexing is the lesser of this number and 8. Thus, the channel simultaneously writes blocks from 8 datafiles into each backup piece. http://www.filibeto.org/sun/lib/nonsun/oracle/11.1.0.6.0/b28359_01_200708/backup.111/b2 Get Latest & Valid 11gocmu Exam's Question and Answers 3 from Japancert.com. 3
8270/rcmtunin.htm Tuning RMAN Performance. NO.8 The BOOKINGS table contains online booking information. When a booking is confirmed, the details are transferred to an archival table BOOKINGS_HIST and deleted from the BOOKINGS table. There is no fixed time interval between each online booking and its confirmation. Because sufficient space is not always available from the delete operations the high-water mark (HWM) is moved up and many rows are inserted below the HWM of the table. The BOOKINGS table has Automatic Segment Space Management (ASSM) and row movement enabled. The table is accessible in 24x7 mode. What is the most efficient method to reclaim the space released by the delete operations in the BOOKINGS table A. Perform EXPORT, DROP, and IMPORT operations on the BOOKINGS table sequentially B. Shrink the BOOKINGS table by using the ALTER TABLE... SHRINK SPACE command C. Move the BOOKINGS table to a different location by using the ALTER TABLE... MOVE command D. Deallocate the space in the BOOKINGS table by using the ALTER TABLE... DEALLOCATE UNUSED command Answer: B NO.9 Which options would you consider while configuring a flash recovery area (fast recovery area in 11g Release 2) for your production database that is running in ARCHIVELOG mode? (Choose all that apply.) A. Setting the FAST_START_MTTR_TARGET to set the mean time to recover B. Setting the RECOVERY_PARALLELISM parameter to twice the number of CPUs C. Using the DB_RECOVERY_FILE_DEST parameter to set the location for flash recovery area D. Using the DB_RECOVERY_FILE_DEST_SIZE parameter to define the disk space limit for the recovery files created in the flash recovery area Answer: C,D NO.10 What two are the prerequisites for enabling Flashback Database? (Choose two) A. The database must be in ARCHIVELOG mode B. The database must be in MOUNT EXCLUSIVE mode C. The database must be opened in RESTRICTED mode D. The database instance must be started in the NOMOUNT state E. The database instance must have the keep buffer pool defined Answer: A,B NO.11 Note the following parameter settings: Get Latest & Valid 11gocmu Exam's Question and Answers 4 from Japancert.com. 4
Which setting is NOT allowed? A. ALTER SYSTEM SET DB_CACHE_SIZE=50M; B. ALTER SYSTEM SET DB_8K_CACHE_SIZE=10M; C. ALTER SYSTEM SET DB_4K_CACHE_SIZE=10M; D. ALTER SYSTEM SET DB_16K_CACHE_SIZE=10M; Answer: B Explanation: Section: Initialization, Parameters, File Location & Server Configuration http://www.akadia.com/services/ora_asm_multiple_block_sizes.html db_block_size integer 8192 - is the db default so you can't have 8K subcache. Get Latest & Valid 11gocmu Exam's Question and Answers 5 from Japancert.com. 5
NO.12 Your archive-log destination directory runs out of space. What is the impact of this on the database? A. None. The database will switch over to the stand-by archive-log destination directory. B. A warning message will be written to the alert log of the database, but no adverse impacts to the database will be experienced. C. The database will shut down, and will not restart until you correct the out-of-space situation. D. The database will continue to try to write to the archive-log destination directory for one hour. After one hour, the database will shut down normally. E. Once Oracle has cycled through all online redo logs, it will stop processing any DML or DDL until the out-of-space condition is corrected. Answer: E NO.13 If you use ALTER DISKGROUP... ADD DISK and specify a wildcard for the discovery string, what happens to disks that are already a part of the same or another disk group? A. The command fails unless you specify the FORCE option. B. The command fails unless you specify the REUSE option. C. The command must be reissued with a more specific discovery string. D. The other disks, already part of the disk group, are ignored. Answer: D NO.14 Which tasks are run automatically as part of the Automated Maintenance Task by default? (Choose all that apply.) A. Segment Advisor B. SQL Access Advisor C. Optimizer statistics gathering Get Latest & Valid 11gocmu Exam's Question and Answers 6 from Japancert.com. 6
D. Automatic SQL Tuning Advisor E. Automatic Database Diagnostics Monitor Answer: A,C,D NO.15 Evaluate the following statements: CREATE TABLE purchase_orders (po_id NUMBER(4), po_date TIMESTAMP, supplier_id NUMBER(6), po_total NUMBER(8,2), CONSTRAINT order_pk PRIMARY KEY(po_id)) PARTITION BY RANGE(po_date) (PARTITION Q1 VALUES LESS THAN (TO_DATE(?1-apr-2007?d-mon-yyyy?), PARTITION Q2 VALUES LESS THAN (TO_DATE(?1-jul-2007?d-mon-yyyy?), PARTITION Q3 VALUES LESS THAN (TO_DATE(?1-oct -2007?d-mon-yyyy?), PARTITION Q4 VALUES LESS THAN (TO_DATE(?1-jan-2008?d-mon-yyyy?)); CREATE TABLE purchase_order_items (po_id NUMBER(4) NOT NULL, product_id NUMBER(6) NOT NULL, unit_price NUMBER(8,2), quantity NUMBER(8), CONSTRAINT po_items_fk FOREIGN KEY (po_id) REFERENCES purchase_orders(po_id)) PARTITION BY REFERENCE(po_items_fk); What are the two consequences of the above statements? (Choose two.) A. Partitions of PURCHASE_ORDER_ITEMS have system-generated names. B. Both PURCHASE_ORDERS and PURCHASE_ORDER_ITEMS tables are created with four partitions each. C. Partitions of the PURCHASE_ORDER_ITEMS table exist in the same tablespaces as the partitions of the PURCHASE_ORDERS table. D. The PURCHASE_ORDER_ITEMS table inherits the partitioning key from the parent table by automatically duplicating the key columns. E. Partition maintenance operations performed on the PURCHASE_ORDER_ITEMS table are automatically reflected in the PURCHASE_ORDERS table. Answer: B,C NO.16 Which of the following calendaring syntax expressions would evaluate to the last day of every month? A. FREQ = MONTHLY; BYMONTHDAY = 31 B. FREQ = MONTHLY; BYMONTHDAY = -1 C. FREQ = DAILY; BYDAY = -1 D. FREQ = MONTHLY; BYDAY = 31 Get Latest & Valid 11gocmu Exam's Question and Answers 7 from Japancert.com. 7
E. FREQ = DAILY; BYMONTHDAY = LAST_DAY Answer: B NO.17 Which of the following information will be gathered by the SQL Test Case Builder for the problems pertaining to SQL-related problems? (Choose all that apply.) A. ADR diagnostic files B. all the optimizer statistics C. initialization parameter settings D. PL/SQL functions, procedures, and packages E. the table and index definitions and actual data Answer: B,C,E NO.18 Given a complete loss of your database, in what order would you need to perform the following RMAN operations to restore it? a.restore controlfile b.restore database c.restore spfile d.recover database e.alter database open f.alter database open resetlogs A.b, a, c, d, e B.a, c, b, d, f C.c, a, b, d, e D.c, a, b, d, f E.e, a, b, d, c Answer: D NO.19 When starting up your ASM instance, you receive the following error: Get Latest & Valid 11gocmu Exam's Question and Answers 8 from Japancert.com. 8
What is the cause of the error? A. The ASM_DISKGROUPS parameter is configured for three disk groups: DGROUP1, DGROUP2, and DGROUP3. The underlying disks for these disk groups have apparently been lost. B. The format of the ASM_DISKGROUPS parameter is incorrect. It should reference the disk group numbers, not the names of the disk groups C. The ASM_POWER_LIMIT parameter is incorrectly set to 1. It should be set to the number of disk groups being attached to the ASM instance. D. The ASM_DISKSTRING parameter is not set; therefore disk discovery is not possible. E. There is insufficient information to solve this problem. Answer: D NO.20 View the Exhibit to examine the parameters set for your database instance. You execute the following command to perform I/O calibration after the declaration of bind variables in the session that are used in the command: SQL> EXECUTE dbms_resource_manager.calibrate_io( num_physical_disks=>1, -max_latency=>50, -max_iops=>:max_iops, -max_mbps=>:max_mbps, - actual_latency=>:actual_latency); Which statement describes the consequence? A. The command produces an error. B. The calibration process runs successfully and populates all the bind variables. C. The calibration process runs successfully but the latency time is not computed. D. The calibration process runs successfully but only the latency time is computed. Answer: A Get Latest & Valid 11gocmu Exam's Question and Answers 9 from Japancert.com. 9