Adobe Photoshop CS6 Seminar Tours keyboard ADOBE PHOTOSHOP CS6 Keyboard Desk Reference shortcuts 1
For more educational resources, visit www.kelbytraining.com For more seminar tours visit www.kelbytraininglive.com or call 800.201.7323 Adobe, Photoshop, and Lightroom are registered trademarks of Adobe Systems Incorporated.
TABLE OF CONTENTS Function Keys 4 Selecting Tools 4-5 Transforming Selections, Selection Borders & Paths 6 Selecting & Moving Objects 6-7 Viewing Images 7 Selecting and Editing Text 8 Formatting Type 8 Curves 9 Editing Paths 9 Painting 9-10 Blending Modes 10-11 Puppet Warp 11 Liquify 11-12 Refine Edge 12 Filter Gallery 12 Vanishing Point 12-13 Camera Raw Dialog Box 13-15 Black and White Dialog Box 15 Slicing and Optimizing 15 Using Panels 16 Action Panels 16 Adjustment Panel 16 Timeline Panel 16-17 Brush Panel 17 Channels Panel 18 Clone Source Panel 18 Color Panel 18 History Panel 18-19 Info Panel 19 Layers Panel 19-20 Layer Comps Panel 20 Paths Panel 21 Swatches Panel 21 3D Tools 21 Keys for Measurement 21 Note: In Photoshop CS6 it is possible to edit the keyboard shortcuts and assign your own shortcuts, including the option to change or replace existing shortcuts. This list is based on the default shortcuts for Photoshop CS6.
FUNCTION KEYS Start Help F1 Help key Undo/Redo Cut F2 F2 Copy F3 F3 Paste F4 F4 Show/Hide Brush panel F5 F5 Show/Hide Color panel F6 F6 Show/Hide Layers panel F7 F7 Show/Hide Info panel F8 F8 Show/Hide Actions panel F9 Option + F9 Revert F12 F12 Fill Shift + F5 Shift + F5 Feather Selection Shift + F6 Shift + F6 Inverse Selection Shift + F7 Shift + F7 F1 SELECTING TOOLS Cycle through tools with the same shortcut key Cycle through hidden tools Shift-press shortcut key (if Use Shift Key for Tool Switch preference is selected) Alt-click + tool (except add anchor point, delete anchor point and convert point tools) Move tool V V Rectangular Marquee tool M M Elliptical Marquee tool Lasso tool L L Polygonal Lasso tool Magnetic Lasso tool Magic Wand tool W W Quick Selection tool Crop tool C C Perspective Crop tool Slice tool Slice Select tool Eyedropper tool I I 3D Material Eyedropper tool Color Sampler tool Ruler tool Note tool Count tool* Shift-press shortcut key (if Use Shift Key for Tool Switch preference is selected) Option-click + tool (except add anchor point, delete anchor point and convert point tools) 4
SELECTING TOOLS (Continued) Spot Healing Brush tool J J Healing Brush tool Patch tool Red Eye tool Brush tool B B Pencil tool Color Replacement tool Mixer Brush tool Clone Stamp tool S S Pattern Stamp tool History Brush tool Y Y Art History Brush tool Eraser tool E E Background Eraser tool Magic Eraser tool Gradient tool G G Paint Bucket tool 3D Material Drop Tool Dodge tool O O Burn tool Sponge tool Pen tool P P Freeform Pen tool Horizontal Type tool T T Vertical Type tool Horizontal Type mask tool Vertical Type mask tool Path Selection tool A A Direct Selection tool Rectangle tool U U Rounded Rectangle tool Ellipse tool Polygon tool Line tool Custom Shape tool Hand tool H H Rotate View tool R R Zoom tool Z Z Use same shortcut key for Liquify *Photoshop Extended only 5
TRANSFORMING SELECTIONS, SELECTION BORDERS, AND PATHS Transform from center or reflect Alt Option Constrain Shift Shift Distort Control Command Apply Enter Return Cancel Control +. (period) or Esc Command +. (period) or Esc Free transform with duplicate data Control + Alt + T Command + Option + T Transform again with duplicate data Control + Shift + Alt + T Command + Shift + Option + T SELECTING AND MOVING OBJECTS Reposition marquee while selecting Any marquee tool (except single column and single row) +Spacebar-drag Any marquee tool (except single column and single row) + Spacebar-drag Add to a selection Any selection tool + Shift-drag Any selection tool + Shift-drag Subtract from a selection Any selection tool + Alt-drag Any selection tool + Option-drag Intersect a selection Constrain marquee to square or circle (if no other selections are active) Draw marquee from center (if no other selections are active) Constrain shape and draw marquee from center Switch to Move tool Switch from Magnetic Lasso tool to Lasso tool Switch from Magnetic Lasso tool to Polygonal Lasso tool Any selection tool (except Quick Selection tool) + Shift-Alt-drag Shift-drag Alt-drag Shift + Alt-drag Control (except when Hand, Slice, Path, Shape, or any Pen tool is selected) Alt-drag Alt-click Any selection tool (except Quick Selection tool) + Shift-Option-drag Shift-drag Option-drag Shift + Option-drag Command (except when Hand, Slice, Path, Shape, or any Pen tool is selected) Option-drag Option-click Apply/cancel an operation Enter/Esc or Control +. (period) Return/Esc or Command +. (period) of the Magnetic Lasso Move copy of selection Move tool + Alt-drag selection Move tool + Option-drag selection Move selection area 1 pixel Move selection 1 pixel Move layer 1 pixel when nothing selected on layer Any selection + Right Arrow, Left Arrow, Up Arrow, or Down Arrow Move tool + Right Arrow, Left Arrow, Up Arrow, or Down Arrow Control + Right Arrow, Left Arrow, Up Arrow, or Down Arrow Any selection + Right Arrow, Left Arrow, Up Arrow, or Down Arrow Move tool + Right Arrow, Left Arrow, Up Arrow, or Down Arrow Command + Right Arrow, Left Arrow, Up Arrow, or Down Arrow Increase/Decrease detection width Magnetic Lasso tool + [ or ] Magnetic Lasso tool + [ or ] Accept cropping or exit cropping Crop tool + Enter or Esc Crop tool + Return or Esc Toggle crop shield off and on / (forward slash) / (forward slash) Make protractor Ruler tool + Alt-drag end point Ruler tool + Option-drag end point 6
SELECTING AND MOVING OBJECTS (Continued) Convert between horizontal and Alt-drag guide vertical guide Snap guide to ruler ticks (except when View > Snap is unchecked) Hold down Shift to move 10 pixels Shift-drag guide Applies to shape tools Option-drag guide Shift-drag guide VIEWING IMAGES Cycle through open documents Control + Tab Control + Tab Switch to previous document Shift + Control + Tab Shift + Command + ` Close a file in Photoshop and open Bridge Shift-Control-W Shift-Command-W Toggle between Standard mode Q Q and Quick Mask mode Toggle forward between Screen Modes F F Toggle backward between Screen Modes Shift + F Shift + F Toggle (forward) canvas color Space + F (or right-click canvas background and select color) Space + F (or Control-click canvas background and select color) Toggle (backward) canvas color Space + Shift + F Space + Shift + F Fit image in window Double-click Hand tool Double-click Hand tool Magnify 100% Double-click Zoom tool or Ctrl + 1 Double-click Zoom tool or Command + 1 Switch to Hand tool (when not in Spacebar Spacebar text-edit mode) Simultaneously pan multiple Shift-drag Shift-drag documents with Hand tool Switch to Zoom In tool Control + spacebar Command + spacebar Switch to Zoom Out tool Alt + spacebar Option + spacebar Move Zoom marquee while dragging with the Zoom tool Apply zoom percentage, and keep zoom percentage box active Zoom in on specified area of an image Temporarily zoom into an image Scroll image with Hand tool Spacebar-drag Shift + Enter in Navigator panel zoom percentage box Control-drag over preview in Navigator panel Hold down H and then click in the image and hold down the mouse button Spacebar-drag, or drag view area box in Navigator panel Spacebar-drag Shift + Return in Navigator panel zoom percentage box Command-drag over preview in Navigator panel Hold down H and then click in the image and hold down the mouse button Spacebar-drag, or drag view area box in Navigator panel Scroll up or down 1 screen Page Up or Page Down Page Up or Page Down Scroll up or down 10 units Shift + Page Up or Page Down Shift + Page Up or Page Down Move view to upper-left corner or lower right corner Toggle layer mask on/off as rubylith (layer mask must be selected) Home or End Home or End \ (backslash) \ (backslash) Hold down Ctrl (Windows) or Command (Mac OS) to scroll left (Page Up) or right (Page Down) 7
SELECTING AND EDITING TEXT Move type in image Select 1 character left/right or 1 line down/up, or 1 word left/right Select characters from insertion point to mouse click point Move 1 character left/right, 1 line down/up, or 1 word left/right Create a new text layer, when a text layer is selected in the Layers panel Select a word, line, paragraph or story Control-drag type when Type layer is selected Shift + Left Arrow/Right Arrow or Down Arrow/Up Arrow, or Control + Shift + Left Arrow/Right Arrow Shift-click Left Arrow/Right Arrow, Down Arrow/Up Arrow, or Control + Left Arrow/Right Arrow Shift-click Double-click, triple-click, quadruple-click, or quintuple-click Command-drag type when Type layer is selected Shift + Left Arrow/Right Arrow or Down Arrow/Up Arrow, or Command + Shift + Left Arrow/Right Arrow Shift-click Left Arrow/Right Arrow, Down Arrow/ Up Arrow, or Command + Left Arrow/ Right Arrow Shift-click Show/Hide selection on selected type Control + H Command + H Display the bounding box for transforming text when editing text, or activate Move tool if cursor is inside the bounding box Scale text within a bounding box when resizing the bounding box Control Control-drag a bounding box handle Double-click, triple-click, quadrupleclick, or quintuple-click Command Move text box while creating text box Spacebar-drag Spacebar-drag Command-drag a bounding box handle FORMATTING TYPE Align left, center, or right Horizontal Type tool + Control + Shift + L, C, or R Align top, center, or bottom Vertical Type tool + Control + Shift + L, C, or R Horizontal Type tool + Command + Shift + L, C, or R Vertical Type tool + Command + Shift + L, C, or R Choose 100% horizontal scale Control + Shift + X Command + Shift + X Choose 100% vertical scale Control + Shift + Alt + X Command + Shift + Option + X Choose Auto leading Control + Shift + Alt + A Command + Shift + Option + A Choose 0 for tracking Control + Shift + Q Command + Control + Shift + Q Justify paragraph, left aligns last line Control + Shift + J Command + Shift + J Justify paragraph, justifies all Control + Shift + F Command + Shift + F Toggle paragraph hyphenation on/off Control + Shift + Alt + H Command + Control + Shift + Option + H Toggle single/every-line composer on/off Control + Shift + Alt + T Command + Shift + Option + T Decrease or increase type size of selected text Control + Shift + < or > Command + Shift + < or > 2 points or pixels Decrease or increase leading 2 points or pixels Alt + Down Arrow or Up Arrow Option + Down Arrow or Up Arrow Decrease or increase baseline shift 2 points or pixels Shift + Alt + Down Arrow or Up Arrow Shift + Option + Down Arrow or Up Arrow Decrease or increase kerning/tracking 20/1000 ems Alt + Left Arrow or Right Arrow Option + Left Arrow or Right Arrow Hold down Alt (Win) or Option (Mac OS) to decrease/increase by 10 Hold down Ctrl (Windows) or Command (Mac OS) to decrease/increase by 10 8
CURVES Open the Curves dialog box Control + M Command + M Select next point on the curve + (plus) + (plus) Select the previous point on the curve - (minus) - (minus) Select multiple points on the curve Shift-click the points Shift-click the points Deselect a point Control + D Command + D To delete a point on the curve Select a point and press Delete Select a point and press Delete Move the selected point 1 unit Arrow keys Arrow keys Move the selected point 10 units Shift + Arrow keys Shift + Arrow keys Display highlights and shadows that Alt-drag black/white point sliders Option-drag black/white point sliders will be clipped Set a point to the composite curve Control-click the image Command-click the image Set a point to the channel curves Shift + Control-click the image Shift + Command-click the image Toggle grid size Alt-click the field Option-click the field EDITING PATHS Select multiple anchor points Direct selection tool + Shift-click Direct selection tool + Shift-click Select entire path Direct selection tool + Alt-click Direct selection tool + Option-click Duplicate a path Switch from Path Selection, Pen, Add Anchor Point, Delete Anchor Point, or Convert Point tools, to Direct Selection tool Switch from Pen tool or Freeform Pen tool to Convert Point tool when pointer is over anchor or direction point Pen (any Pen tool), Path Selection or Direct Selection tool + Control + Alt-drag Control Alt Pen (any Pen tool), Path Selection or Direct Selection tool+ Command + Option-drag Command Option Close path Magnetic Pen tool-double-click Magnetic Pen tool-double-click Close path with straight-line segment Magnetic Pen tool + Alt-double-click Magnetic Pen tool + Option-double-click PAINTING Select foreground color from color picker Select foreground color from image with Eyedropper tool Any painting tool + Shift + Alt + right-click and drag Any painting tool + Control + Option + Command and drag Any painting tool + Alt or any shape Any painting tool + Option or any tool + Alt (except when Paths option shape tool + Option (except when Paths is selected) option is selected) Select background color Eyedropper tool + Alt-click Eyedropper tool + Option-click Color sampler tool Eyedropper tool + Shift Eyedropper tool + Shift Deletes color sampler Color sampler tool + Alt-click Color sampler tool + Option-click Sets opacity, tolerance, strength, or exposure for painting mode Any painting or editing tool + number keys (e.g., 0=100%, 1=10%, 4 then 5 in quick succession=45%) (When airbrush option is enabled, use Shift + number keys) Any painting or editing tool + number keys (e.g., 0=100%, 1=10%, 4 then 5 in quick succession=45%) (When airbrush option is enabled, use Shift + number keys) 9
PAINTING (Continued) Sets flow for painting mode Any painting or editing tool + Shift + number keys (e.g., 0=100%, 1=10%, 4 then 5 in quick succession=45%) (When airbrush option is enabled, omit Shift) Any painting or editing tool + Shift + number keys (e.g., 0=100%, 1=10%, 4 then 5 in quick succession=45%) (When airbrush option is enabled, omit Shift) Mixer Brush changes Mix setting Alt + Shift + number Option + Shift + number Mixer Brush changes Wet setting Number keys Number keys Mixer Brush changes Wet and Mix to 0 00 00 Cycles through blending modes Shift + + (plus) or (minus) Shift + + (plus) or (minus) Fills selection/layer with foreground Alt + Backspace, or Control + Backspace Option + Delete, or Command + Delete or background color Fills from history Control + Alt + Backspace Command + Option + Delete Displays Fill dialog box Shift + Backspace Shift + Delete Lock transparent pixels on/off / (forward slash) / (forward slash) Connects points with a straight line Any painting tool + Shift-click Any painting tool + Shift-click Hold down Shift to preserve transparency 10 BLENDING MODES Cycle through blending modes Shift + + (plus) or (minus) Shift + + (plus) or (minus) Normal Shift + Alt + N Shift + Option + N Dissolve Shift + Alt + I Shift + Option + I Behind (Brush tool only) Shift + Alt + Q Shift + Option + Q Clear (Brush tool only) Shift + Alt + R Shift + Option + R Darken Shift + Alt + K Shift + Option + K Multiply Shift + Alt + M Shift + Option + M Color Burn Shift + Alt + B Shift + Option + B Linear Burn Shift + Alt + A Shift + Option + A Lighten Shift + Alt + G Shift + Option + G Screen Shift + Alt + S Shift + Option + S Color Dodge Shift + Alt + D Shift + Option + D Linear Dodge Shift + Alt + W Shift + Option + W Overlay Shift + Alt + O Shift + Option + O Soft Light Shift + Alt + F Shift + Option + F Hard Light Shift + Alt + H Shift + Option + H Vivid Light Shift + Alt + V Shift + Option + V Linear Light Shift + Alt + J Shift + Option + J Pin Light Shift + Alt + Z Shift + Option + Z Hard Mix Shift + Alt + L Shift + Option + L
BLENDING MODES (Continued) Difference Shift + Alt + E Shift + Option + E Exclusion Shift + Alt + X Shift + Option + X Hue Shift + Alt + U Shift + Option + U Saturation Shift + Alt + T Shift + Option + T Color Shift + Alt + C Shift + Option + C Luminosity Shift + Alt + Y Shift + Option + Y Desaturate Sponge tool + Shift + Alt + D Sponge tool + Shift + Option + D Saturate Sponge tool + Shift + Alt + S Sponge tool + Shift + Option + S Dodge/burn shadows Dodge tool/burn tool + Shift + Alt + S Dodge/Burn tool + Shift + Option + S Dodge/burn midtones Dodge tool/burn tool + Shift + Alt + M Dodge/Burn tool + Shift + Option + M Dodge/burn highlights Dodge tool/burn tool + Shift + Alt + H Dodge/Burn tool + Shift + Option + H Set blending mode to Threshold for bitmap images, Normal for all other images Shift + Alt + N Shift + Option + N PUPPET WARP Cancel completely Esc Esc Undo last pin adjustment Ctrl + Z Command + Z Select all pins Ctrl + A Command + A Deselect all pins Ctrl + D Command + D Select multiple pins Shift-click Shift-click Move multiple selected pins Shift-drag Shift-drag Temporarily hide pins H H LIQUIFY Forward Warp tool W W Reconstruct tool R R Twirl Clockwise tool C C Pucker tool S S Bloat tool B B Push Left tool O O Mirror tool M M Turbulence tool T T Freeze Mask tool F F Thaw Mask tool D D Reverse direction for Bloat, Pucker, Push Left, and Mirror tools Continually sample the distortion Alt + tool Alt-drag in preview with Reconstruct tool, Displace, Amplitwist, or Affine mode selected Option + tool Option-drag in preview with Reconstruct tool, Displace, Amplitwist, or Affine mode selected 11
LIQUIFY (Continued) Decrease/increase brush size by 2, or density, pressure, rate, or turbulent jitter by 1 Decrease/increase brush size by 2, or density, pressure, rate, or turbulent jitter by 1 Down Arrow/Up Arrow in Brush Size, Density, Pressure, Rate, or Turbulent Jitter text box Left Arrow/Right Arrow with Brush Size, Density, Pressure, Rate, or Turbulent Jitter slider showing Cycle through controls on right from top Tab Tab Cycle through controls on right from bottom Shift + Tab Shift + Tab Change Cancel to Reset Alt Option Hold down Shift to decrease/increase by 10 Down Arrow/Up Arrow in Brush Size, Density, Pressure, Rate, or Turbulent Jittertext box Left Arrow/Right Arrow with Brush Size, Density, Pressure, Rate, or Turbulent Jitter slider showing REFINE EDGE Open the Refine Edge dialog box Control + Alt + R Command + Option + R Cycle (forward) through preview modes F F Cycle (backward) through preview modes Shift + F Shift + F Toggle between original image and X X selection preview Toggle between original selection and P P refined version Toggle radius preview on and off J J Toggle between Refine Radius and Erase Refinements tools FILTER GALLERY E Apply a new filter on top of selected Alt-click a filter Option-click a filter Open/close all disclosure triangles Alt-click a disclosure triangle Option-click a disclosure triangle Change Cancel button to Default Control Command Change Cancel button to Reset Alt Option Undo/Redo Control + Z Command + Z Step forward Control + Shift + Z Command + Shift + Z Step backward Control + Alt + Z Command + Option + Z E 12 VANISHING POINT Zoom 2x (temporary) X X Zoom in Control + + (plus) Command + + (plus) Zoom out Control + - (hyphen) Command + - (hyphen) Fit in view Control + 0 (zero), Double-click Hand tool Command + 0 (zero), Double-click Hand tool Zoom to center at 100% Double-click Zoom tool Double-click Zoom tool Increase brush size (Brush, Stamp tools) ] ] Decrease brush size (Brush, Stamp tools) [ [ Increase brush hardness (Brush, Stamp tools) Shift + ] Shift + ]
VANISHING POINT (Continued) Decrease brush hardness (Brush, Stamp tools) Shift + [ Shift + [ Undo last action Control + Z Command + Z Redo last action Control + Shift + Z Command + Shift + Z Deselect all Control + D Command + D Hide selection and planes Control + H Command + H Move selection 1 pixel Arrow keys Arrow keys Move selection 10 pixels Shift + arrow keys Shift + arrow keys Copy Control + C Command + C Paste Control + V Command + V Repeat last duplicate and move Control + Shift + T Command + Shift + T Create a floating selection from the current selection Control + Alt + T Fill a selection with image under the pointer Control-drag Command-drag Create a duplicate of the selection Control + Alt-drag Command + Option-drag as a floating selection Constrain selection to a 15 rotation Alt + Shift to rotate Option + Shift to rotate Select a plane under another selected plane Control-click the plane Command-click the plane Create 90 degree plane off parent plane Control-drag Command-drag Delete last node while creating plane Backspace Delete Make a full canvas plane, square to the camera Double-click the Create Plane tool Double-click the Create Plane tool Show/hide measurements (Photoshop Extended) Control + Shift + H Command + Shift + H Export to a DFX file (Photoshop Extended) Control + E Command + E Export to a 3DS file (Photoshop Extended) Control + Shift + E Command + Shift + E CAMERA RAW DIALOG BOX Zoom tool Z Z Hand tool H H White Balance tool I I Color Sampler tool S S Crop tool C C Straighten tool A A Spot Removal tool B B Red Eye Removal tool E E Basic panel Ctrl+Alt+1 Command+Option+1 Tone Curve panel Ctrl+Alt+2 Command+Option+2 Detail panel Ctrl+Alt+3 Command+Option+3 HSL/Grayscale panel Ctrl+Alt+4 Command+Option+4 Split Toning panel Ctrl+Alt+5 Command+Option+5 Lens Corrections panel Ctrl+Alt+6 Command+Option+6 Camera Calibration panel Ctrl+Alt+7 Command+Option+7 13
CAMERA RAW DIALOG BOX (Continued) Presets panel Ctrl+Alt+8 Command+Option+8 (Universal Access zoom shortcut must be disabled in System Preferences) Open Snapshots panel Ctrl+Alt+9 Command+Option+9 Parametric Curve Targeted Adjustment tool Ctrl+Alt+Shift+T Command+Option+Shift+T Hue Targeted Adjustment tool Ctrl+Alt+Shift+H Command+Option+Shift+H Saturation Targeted Adjustment tool Ctrl+Alt+Shift+S Command+Option+Shift+S Luminance Targeted Adjustment tool Ctrl+Alt+Shift+L Command+Option+Shift+L Grayscale Mix Targeted Adjustment tool Ctrl+Alt+Shift+G Command+Option+Shift+G Last-used Targeted Adjustment tool T T Adjustment Brush tool K K Graduated Filter tool G G Increase/decrease brush size ] / [ ] / [ Increase/decrease brush feather Shift + ] / Shift + [ Shift + ] / Shift + [ Increase/decrease Adjustment Brush tool flow in increments of 10 Temporarily switch from Add to Erase mode for the Adjustment Brush tool, or from Erase to Add mode Increase/decrease temporary Adjustment Brush tool size Increase/decrease temporary Adjustment Brush tool feather Increase/decrease temporary Adjustment Brush tool flow in increments of 10 Switch to New mode from Add or Erase mode of the Adjustment Brush tool or the Graduated Filter = (equal sign) / - (hyphen) = (equal sign) / - (hyphen) Alt Option Alt + ] / Alt + [ Option + ] / Option + [ Alt + Shift + ] / Alt + Shift + [ Option + Shift + ] / Option + Shift + [ Alt + = / Alt + - Option = / Option + - Toggle Auto Mask for Adjustment Brush tool M M Toggle Show Mask for Adjustment Brush tool Y Y Toggle pins for Adjustment Brush tool V V N Toggle overlay for Graduated Filter, Spot V V Removal tool, or Red Eye Removal tool Rotate image left L or Ctrl + ] L or Command + ] Rotate image right R or Ctrl + [ R or Command + [ Zoom in Ctrl + + (plus) Command + + (plus) Zoom out Ctrl + - (hyphen) Command + - (hyphen) Temporarily switch to Zoom In tool Ctrl Command (Doesn t work when Straighten tool is selected. If Crop tool is active, temporarily switches to Straighten tool.) Temporarily switch to Zoom Out tool and change the Open Image button to Open Copy and the Cancel button to Reset Toggle preview P P Alt N Option 14
CAMERA RAW DIALOG BOX (Continued) Full screen mode F F Temporarily activate the White Balance tool and change the Open Image button to Open Object. (Does not work if Crop tool is active.) Select multiple points in Curves panel Shift Click the first point; Shift-click additional points Shift Click the first point; Shift-click additional points Add point to curve in Curves panel Control-click in preview Command-click in preview Move selected point in Curves panel (1 unit) Arrow keys Arrow keys Move selected point in Curves panel (10 units) Shift-arrow Shift-arrow Open selected images in Camera Raw dialog Ctrl + R Command + R box from Bridge Open selected images from Bridge bypassing Shift + double-click image Shift + double-click image Camera Raw dialog box Display highlights that will be clipped in Preview Alt-drag Exposure, Recovery, or Black sliders Option-drag Exposure, Recovery, or Black sliders Highlight clipping warning O O Shadows clipping warning U U (Filmstrip mode) Add 1-5 star rating Ctrl+1-5 Command+1-5 (Filmstrip mode) Increase/decrease rating Ctrl+. (period) / Ctrl+, (comma) Command+. (period) / Command+, (comma) (Filmstrip mode) Add red label Ctrl+6 Command+6 (Filmstrip mode) Add yellow label Ctrl+7 Command+7 (Filmstrip mode) Add green label Ctrl+8 Command+8 (Filmstrip mode) Add blue label Ctrl+9 Command+9 (Filmstrip mode) Add purple label Ctrl+Shift+0 Command+Shift+0 Camera Raw preferences Ctrl + K Command + K Deletes Adobe Camera Raw preferences Ctrl + Alt (on open) Option + Shift (on open) BLACK AND WHITE DIALOG BOX Open the Black-and-White dialog box Shift + Control + Alt + B Shift + Command + Option+ B Increase/decrease selected value by 1% Up Arrow/Down Arrow Up Arrow/Down Arrow Increase/decrease selected value by 10% Shift + Up Arrow/Down Arrow Shift + Up Arrow/Down Arrow Change the values of the closest color slider Click-drag on the image Click-drag on the image SLICING AND OPTIMIZING Toggle between Slice tool and Slice Selection tool Control Command Draw square slice Shift-drag Shift-drag Draw from center outward Alt-drag Option-drag Draw square slice from center outward Shift + Alt-drag Shift + Option-drag Reposition slice while creating slice Spacebar-drag Spacebar-drag Open context-sensitive menu Right-click slice Control-click slice 15
USING PANELS Set options for new items (except for Actions, Animation, Styles, Brushes, Tool Presets, and Layer Comps panels) Alt-click New button Option-click New button Delete without confirmation (except for Brush panel) Alt-click Delete button Option-click Delete button Apply value and keep text box active Shift + Enter Shift + Return Show/Hide all panels Tab Tab Show/Hide all panels except the toolbox and Shift + Tab Shift + Tab Options bar Highlight Options bar Select tool and press Enter Select tool and press Return Increase/decrease selected values by 10 Shift + Up Arrow/Down Arrow Shift + Up Arrow/Down Arrow ACTION PANELS Turn command on and all others off, or turns all commands on Turn current modal control on and toggle all other modal controls Change action or action set options Alt-click the check mark next to a command. Alt-click Alt + double-click action or action set Option-click the check mark next to a command. Option-click Option + double-click action or action set Display Options dialog box for recorded command Double-click recorded command Double-click recorded command Play entire action Control + double-click an action Command + double-click an action Collapse/expand all components of an action Alt-click the triangle Option-click the triangle Play a command Control-click the Play button Command-click the Play button Create new action and begin recording without Alt-click the New Action button Option-click the New Action button confirmation Select contiguous items of the same kind Shift-click the action/command Shift-click the action/command Select discontiguous items of the same kind Control-click the action/command Command-click the action/command ADJUSTMENTS PANEL Choose specific channel for adjustment Alt + 3 (red), 4 (green), 5 (blue) Option + 3 (red), 4 (green), 5 (blue) Choose composite channel for adjustment Alt + 2 Option + 2 Delete adjustment layer Delete or Backspace Delete Define Auto options for Levels or Curves Alt-click Auto button Option-click Auto button TIMELINE PANEL Start playing the timeline or Animation panel Spacebar Spacebar Switch between timecode and frame numbers (current time view) Alt + click the current-time display in the upper-left corner of the timeline. Option + click the current-time display in the upper-left corner of the timeline. 16
TIMELINE PANEL (Continued) Expand and collapse list of layers Alt + click Option + click on list triangles Jump to the next/previous whole second in timeline Increase playback speed Decrease playback speed Snap an object (keyframe, the current time, layer in point, and so on) to the nearest object in timeline Scale (evenly distribute to condensed or extended length) a selected group of multiple keyframes Hold down the Shift key when clicking the Next/Previous Frame buttons (on either side of the Play button). Hold down the Shift key while dragging the current time. Hold down the Control key while dragging the current time. Shift-drag Alt-drag (first or last keyframe in the selection) Hold down the Shift key when clicking the Next/Previous Frame buttons (on either side of the Play button) Hold down the Shift key while dragging the current time. Hold down the Command key while dragging the current time. Shift-drag Option-drag (first or last keyframe in the group) Back one frame Left Arrow or Page Up Left Arrow or Page Up Forward one frame Right Arrow or Page Down Right Arrow or Page Down Back ten frames Shift + Left Arrow or Shift + Page Up Shift + Left Arrow or Shift Page Up Forward ten frames Shift + Right Arrow or Shift + Page Down Shift + Right Arrow or Shift + Page Down Move to the beginning of the timeline Home Home Move to the end of the timeline End End Move to the beginning of the work area Shift + Home Shift + Home Move to the end of the work area Shift + End Shift + End Move to In point of the current layer Up Arrow Up Arrow Move to the Out point of the current layer Down Arrow Down Arrow Back 1 second Shift + Up Arrow Shift + Up Arrow Forward 1 second Shift + Down Arrow Shift + Down Arrow Return a rotated document to its original orientation Esc Note: Some shortcuts need to be enabled. Choose Enable Timeline Shortcut Keys from the Animation (Timeline) panel menu. Esc BRUSH PANEL Delete brush Alt-click brush Option-click brush Rename brush Double-click brush Double-click brush Change brush size Alt + right click + drag left or right Ctrl + Option + drag left or right Decrease/increase brush softness/hardness Alt + right click + drag up or down Ctrl + Option + drag up or down Select previous/next brush size, (comma) or. (period), (comma) or. (period) Select first/last brush Shift +, (comma) or. (period) Shift +, (comma) or. (period) Display precise cross hair for brushes Caps Lock or Shift + Caps Lock Caps Lock Toggle airbrush option Shift + Alt + P Shift + Option + P 17
CHANNELS PANEL If you prefer channel shortcuts starting with Ctrl/Command + 1 for red, choose Edit > Keyboard Shortcuts, and select Use Legacy Channel Shortcuts. Select individual channels Ctrl + 3 (red), 4 (green), 5 (blue) Command + 3 (red), 4 (green), 5 (blue) Select composite channel Ctrl + 2 Command + 2 Load channel as selection Control-click channel thumbnail, or Alt + Ctrl + 3 (red), 4 (green), 5 (blue) Command-click channel thumbnail, or Option + Command + 3 (red), 4 (green), 5 (blue) Add to current selection Control + Shift-click channel thumbnail. Command + Shift-click channel thumbnail Subtract from current selection Control + Alt-click channel thumbnail Command + Option-click channel thumbnail Intersect with current selection Control + Shift + Alt-click channel thumbnail Alt-click Save Selection As Channel button Command + Shift + Option-click channel thumbnail Set options for Save Selection As Option-click Save Selection As Channel button Channel button Create a new spot channel Control-click Create New Channel button Command-click Create New Channel button Select/deselect multiple colorchannel Shift-click color channel Shift-click color channel selection Select/deselect alpha channel and show/hide as a rubylith overlay Display channel options Toggle composite and grayscale mask in Quick Mask mode Shift-click alpha channel Shift-click alpha channel Double-click alpha or spot channel Double-click alpha or spot channel thumbnail thumbnail ~ (tilde) ~ (tilde) CLONE SOURCE PANEL Show Clone Source (overlays image) Alt + Shift Opt + Shift Nudge Clone Source Alt + Shift + arrow keys Opt + Shift + arrow keys Rotate Clone Source Alt + Shift + < or > Opt + Shift + < or > Scale (increase or reduce size) Clone Source Alt + Shift + [ or ] Opt + Shift + [ or ] COLOR PANEL Select background color Alt-click color in color bar Option-click color in color bar Display Color Bar menu Right-click color bar Control-click color bar Cycle through color choices Shift-click color bar Shift-click color bar HISTORY PANEL Create a new snapshot Alt + New Snapshot Option + New Snapshot Rename snapshot Double-click snapshot name Double-click snapshot name Step forward through image states Control + Shift + Z Command + Shift + Z Step backward through image states Control + Alt + Z Command + Option + Z 18
HISTROY PANEL (Continued) Duplicate any image state, except the current state Permanently clear history (no Undo) Alt-click the image state Alt + Clear History (in History panel pop up menu) Option-click the image state Option + Clear History (in History panel pop up menu) INFO PANEL Change color readout modes Click eyedropper icon Click eyedropper icon Change measurement units Click crosshair icon Click crosshair icon LAYERS PANEL Load layer transparency as a selection Control-click layer thumbnail Command-click layer thumbnail Add to current selection Control + Shift-click layer thumbnail Command + Shift-click layer thumbnail Subtract from current selection Control + Alt-click layer thumbnail Command + Option-click layer thumbnail Intersect with current selection Control + Shift + Alt-click layer thumbnail Command + Shift + Option-click layer thumbnail Load filter mask as a selection Control-click filter mask thumbnail Command-click filter mask thumbnail Group layers Control + G Command + G Ungroup layers Control + Shift + G Command-Shift + G Create/release clipping mask Control + Alt + G Command-Option + G Select all layers Control + Alt + A Command + Option + A Merge visible layers Control + Shift + E Command + Shift + E Create new empty layer with dialog box Alt-click New Layer button Option-click New Layer button Create new layer below target layer Control-click New Layer button Command-click New Layer button Select top layer Alt +. (period) Option +. (period) Select bottom layer Alt +, (comma) Option +, (comma) Add to layer selection in Layers panel Shift + Alt + [ or ] Shift + Option + [ or ] Select next layer down/up Alt + [ or ] Option + [ or ] Move target layer down/up Control + [ or ] Command + [ or ] Merge a copy of all visible layers into target layer Control + Shift + Alt + E Command + Shift + Option + E Merge layers Highlight layers, then Control + E Highlight layers, then Command + E Move layer to bottom or top Control + Shift + [ or ] Command + Shift + [ or ] Copy current layer to layer below Alt + Merge Down command from the Panel pop up menu Option + Merge Down command from the Panel pop up menu Merge all visible layers to a new layer above the currently selected layer Alt + Merge Visible command from the Panel pop up menu Option + Merge Visible command from the Panel pop up menu Show/hide this layer/layer group only Right-click the eye icon Control-click the eye icon or all layers/layer groups Show/hide all other currently visible layers Alt-click the eye icon Option-click the eye icon 19
LAYERS PANEL (Continued) Toggle lock transparency for target layer, or last applied lock / (forward slash) / (forward slash) Edit layer effect/style, options Double-click layer effect/style Double-click layer effect/style Hide layer effect/style Alt-double-click layer effect/style Option-double-click layer effect/style Edit layer style Double-click layer Double-click layer Disable/enable vector mask Shift-click vector mask thumbnail Shift-click vector mask thumbnail Open Layer Mask Display Options dialog box Double-click layer mask thumbnail Double-click layer mask thumbnail Toggle layer mask on/off Shift-click layer mask thumbnail Shift-click layer mask thumbnail Toggle filter mask on/off Shift-click filter mask thumbnail Shift-click filter mask thumbnail Toggle between layer mask/composite image Alt-click layer mask thumbnail Option-click layer mask thumbnail Toggle between filter mask/composite image Alt-click filter mask thumbnail Option-click filter mask thumbnail Toggle rubylith mode for layer mask on/off \ (backslash), or Shift + Alt-click \ (backslash), or Shift + Option-click Select all type; temporarily select Type tool Double-click type layer thumbnail Double-click type layer thumbnail Create a clipping mask Alt-click the line dividing two layers Option-click the line dividing two layers Rename layer Double-click the layer name Double-click the layer name Edit filter settings Double-click the filter effect Double-click the filter effect Edit the Filter Blending options Double-click the Filter Blending icon Double-click the Filter Blending icon Create new layer group below current layer/layer set Control-click New Group button Command-click New Group button Create new layer group with dialog box Alt-click New Group button Option-click New Group button Create layer mask that hides all/selection Alt-click Add Layer Mask button Option-click Add Layer Mask button Create vector mask that reveals all/path area Control-click Add Layer Mask button Command-click Add Layer Mask button Create vector mask that hides all or displays path area Display layer group properties Control + Alt-click Add Layer Mask button Right-click layer group and choose Group Properties, or double-click group Select/deselect multiple contiguous layers Shift-click Shift-click Select/deselect multiple discontiguous layers Control-click Command-click Command + Option-click Add Layer Mask button Control-click the layer group and choose Group Properties, or doubleclick group LAYER COMPS PANEL Create new layer comp without the New Layer Comp box Alt-click Create New Layer Comp button Option-click Create New Layer Comp button Open Layer Comp Options dialog box Double-click layer comp Double-click layer comp Rename in-line Double-click layer comp name Double-click layer comp name Select/deselect multiple contiguous layer comps Shift-click Shift-click Select/deselect multiple discontiguous layer comps Control-click Command-click 20
PATHS PANEL Load path as selection Control-click pathname Command-click pathname Add path to selection Control + Shift-click pathname Command + Shift-click pathname Subtract path from selection Control + Alt-click pathname Command + Option-click pathname Retain intersection of path as selection Control + Shift + Alt-click pathname Command + Shift + Option-click pathname Hide path Control + Shift + H Command + Shift + H Set options for Fill Path with Foreground Color button, Stroke Path with Brush button, Load Path as a Selection button, Make Work Path from Selection button, and Create New Path button Alt-click button Option-click button SWATCHES PANEL Create new swatch from foreground color Click in empty area of panel Click in empty area of panel Set swatch color as background color Control-click swatch Command-click swatch Delete swatch Alt-click swatch Option-click swatch 3D TOOLS Reveal All Alt-Shift-Ctrl-X Opt-Shift-Cmd-X Show/Hide Polygons Within Selection: Alt-Ctrl-X Opt-Cmd-X Render Opt-Shift-Cmd-R KEYS FOR MEASUREMENT (Photoshop Extended) Record a measurement Shift + Control + M Shift + Command + M Deselects all measurements Control + D Command + D Selects all measurements Control + A Command + A Hide/show all measurements Shift + Control + H Shift + Command + H Removes a measurement Backspace Delete Nudge the measurement Arrow keys Arrow keys Nudge the measurement in increments Shift + arrow keys Shift + arrow keys Extend/shorten selected measurement Ctrl + left/right arrow key Command + left/right arrow key Extend/shorten selected measurement Shift + Ctrl + left/right arrow key Shift +Command + left/right arrow key in increments Rotate selected measurement Ctrl + up/down arrow key Command + up/down arrow key Rotate selected measurement in increments Shift + Ctrl + up/down arrow key Shift + Command + up/down arrow key 21
KELBY MEDIA GROUP, Inc. 333 Douglas Road East, Oldsmar, FL 34677-2922 813.433.5000 Fax: 813.433.5015 For more educational resources, visit www.kelbytraining.com For more seminar tours visit www.kelbytraininglive.com or call 800.201.7323 Adobe, Photoshop, and Lightroom are registered trademarks of Adobe Systems Incorporated. 22
23
For a complete listing of dates and cities for upcoming seminars visit www.kelbytraininglive.com or call 800.201.7323 24