content between two the phonebook records of a content from a 1. Insert the mce CD. 2. Choose the Run mce Setup button. The disc will run and display the below screen: Choose mce to continue 5. Ready to install screen will be displayed, click to begin. 6. Setup wizard will install mce This may take several minutes, When prompted, press to complete the setup. 7. icon will be added to your Desktop : 3. Insert the product key provided to you (printed or by email) and click install. 4. Select the installation folder. To change the target directory click the browse button, click next to continue. menu: Note: In case installation has failed you can use the download link located in the mce ation window
content between two the phonebook records of a content from a 1. Connect the AC Adaptor to the back of the 3. Check that the power indicator of the connection box and into your power outlet. connection box lights up. Back Front 2. Connect the mce connection box using the supplied USB Cable directly to one of the USB ports at the back of the PC. Do not connect the USB cable to a front port or to a USB hub. Note: Make sure to use the supplied AC Adaptor. Using any other type of Adaptor may damage the mce connection box.
The Task-Bar Source Panel Target Panel content between two the phonebook records of a content from a More Options Connection Box Status Button Get acquainted with The Task Bar Select the operation you wish to perform from the task bar (Task bar interface will change according to different versions). Source and Target panels Visual representation of the connected devices or actions to be performed by the user. More Options Click the mce logo to change language, view version details, supported device list, etc. Choose from the menu: Connection Box Status Presents the status of the mce connection box OK Not connected / malfunction Select Device Opens the device selection wizard which allows you to search and browse through supported devices, find the cable colour and name.
content between two the phonebook records of a content from a 1. Launch the application. 2. An screen will be displayed, click Next to proceed. 4. Press Finish to complete the activation process. 3. Next screen will display your product key, press Activate to proceed.
content between two the phonebook records of a content from a content between any two 1. In the task-bar click. 2. Connect the phone you wish to copy from, to the Source port of the MCE connection box. A picture of the phone will appear in the Source device panel. 5. To transfer the phonebook Click The transfer process will begin. If you wish to transfer multimedia content, make sure to select Include Multimedia. Select the content you wish to transfer using the Select content dialog. 3. Connect the phone you wish to copy to, to the Target port of the MCE connection box. A picture of the phone will appear in the Target device panel. 4. Once the Source and Target phones are both Select Replace content if you wish to erase and replace the content on the target phone. connected and recognized, the start button will be enabled. Note: If the connected phone is not automatically recognized, manually select it from the device list using Select Device.
content between two the phonebook records of a content from a a hard copy of a phonebook 1. In the task-bar click. 2. Connect the phone you wish to print the phonebook from, to the Target port of the MCE connection box*. A picture of the phone will appear in the Target panel. * It is possible to perform the operation when handset is recognized on the Left port. 3. Click to print the phonebook of the connected phone. 4. If you have more than one printer installed, you will be prompted 5. out includes all phone numbers associated with contacts and also email details when available. to choose the printer you wish to print to.
and Restore content between two the phonebook records of a content from a content to PC/USB 1. In the task-bar click. 2. Connect the phone you wish to backup its content, to the Target port of the MCE connection box*. A picture of the phone will appear in the Target panel. 3. Connect a USB stick to the Left side port of the MCE connection box. * It is possible to perform the operation when handset is recognized on the Left port. Note: Depending on your corporate security policy, backup to a PC without requiring a USB stick may 4. The start button will be enabled. To the phonebook Click. if you wish to transfer multimedia content, make sure to select Include Multimedia. To Restore from a previous backup: 1. In the task-bar click Restore. 2. Either plug in the USB stick you have previously backed up to into the Source port, or select the locally stored backup file. 3. Connect the phone you wish to restore to, to also be available. In such case, a the Target port. 4. To start the process click. PC image will be present on the Target Panel.
content between two the phonebook records of a content from a mobile device content 1. In the task-bar click. 2. Connect the phone you wish to delete its content, to the Target port of the MCE connection box. 3. if you wish to delete multimedia content, make Select the content you wish to delete using the Select content dialog. sure to select Include Multimedia. 4. To delete the selected content on the Target device click The deletion process will begin. Note: does not completely wipe the device content, it only deletes the content types you have selected. For added security, manually verify that all content on the device was successfully deleted.
content between two the phonebook records of a content from a Easily configure email on 1. In the task-bar click. 2. Connect the phone you wish to configure email on, to the Target port of the mce connection box. A picture of the phone will appear in the Target panel and the email setup menu will 6. setup menu will appear with an indication on the account you have just defined. appear in the left side panel. 3. Click on the email provider you wish to configure. If you cannot find the required provider, click Other. mce supports dozens of email providers. 4. Type in the full email address and password then click Add. The system will automatically detect all required settings and will validate username and password are correct. 5. In case validation has failed you may re-enter the username/password or continue the process with an un-validated credentials. 7. You can configure multiple accounts on one phone. To continue and add other email accounts simply click on the provider buttons. 8. When you are done adding email accounts, click to apply the email configuration on the phone.
Software Flashing content between two the phonebook records of a content from a 1. In the task-bar click Care then. 2. Connect the phone you wish to flash its software, to the Target port of the mce connection box. A picture of the phone will appear in the Target panel. 3. click to proceed with flashing. 4. Follow the instructions of the following screen, click update to proceed. Note: Do not unplug the device during the Flashing process. Unplugging the device may severely damage the device.