Subminiature Pushbutton Switches RoHS RoHS Compliant 1. 2. 3. 4. 2.54mm 5. UL UL UL 0.4VA ACDC AC/DC60V 50mA AC/DC20mV 1A ULAC/DC48V 50mA 50m AC200V 1.5mA AC250V 1 500M DC500V 10,0000.4VA30,000 0.782.94N 2085 4085 Features 1. Twin-contact clip mechanism for high reliability. 2. Process sealed structure 3. Gold-plated contacts. 4. Terminal pin pitch: 2.54 mm. 5. UL recognized 0.4VA ACDC Rating Max:50mA 60VAC/DC Min:1A 20mVAC/DC UL:48VAC/DC 50mA Initial contact resistance 50m max. 1.5mA 200VAC Dielectric strength 250VAC 1 minute Initial Insulation resistance 500M min. 500VDC 10,000 operations at maximum rating. Electrical life 30,000 operations at 0.4VA Operating force 0.782.94N Operating temperature range Storage temperature range 2085 4085 /Part Numbering A PE 2 F 2 M 10 Z Series code PE PC Push type 1 1 pole F 2 M R/A0.2 2 2 5 Right angle 0.2 inch pitch 6 R/A0.3 Right angle 0.3 inch pitch Page 253. Optional Accessories Standard ON ONMomentary.
/SPDT M /Standard type 1F2M10Z ON ON 23 21 2/DPDT 2F2M10Z ON ON 23 56 21 54 /SPDT 1F5M10Z ON ON 23 21 0.2R/A 2/DPDT 2F5M10Z ON ON 23 56 21 54 0.2R/A /SPDT 1F6M10Z ON ON 23 21 0.3R/A 2/DPDT 2F6M10Z ON ON 23 56 21 54 0.3R/A ON ONMomentary. Semi-standard products. Made to order products.
/Right angle terminals 0.2 5.08mm0.37.62mm2 0.21F5M10Z 0.31F6M10Z The space between the terminal rows are available in two dimensions: 0.2 inches (5.08 mm) and 0.3 inches (7.62 mm). [Example] 0.2-inch pitch : 1F-5M-10-Z 0.3-inch pitch : 1F-6M-10-Z Button Shape Bracket Installation Procedure M StandardM 1 12.7N 12.7N 29.4N 140000640314140000640318 140000640315 245 Color Cap Mounting Mounting of Switch Use PC boards with hole diameter of 1mm. Do not bend the terminal pins before mounting the switch on the PC board. After mounting the switch, do not place the device in such a way that the device weight will be applied on to the actuator of the switch. Do not apply load exceeding 12.7 N to the actuator. If load exceeding 12.7 N is expected to be applied to the actuator, please use a Bracket (optional accessory sold separately). Maximum load will be 29.4 N when a Bracket is used. Use Bracket 140000640314 or 140000640318 for side-byside mounting. To increase mounting strength, use Bracket 140000640315. PC Hole Layouts will change depending on the Bracket. Please refer to P.245. 249Refer to P.249. Optional Accessories.
Manual Soldering DeviceSoldering iron 380C, Max.; 3 seconds, Max. Auto Soldering DeviceJet wave type or dip type 275C, Max.; 6 seconds, Max. 80120120 Pre-heating should be done at temperatures ranging from 80 C to 120C and within 120 seconds. /Flux Cleaning Solvent :Fluorine or Alcohol type. 90 5 Cleaning after soldering should be done after the terminal temperature falls to 90 or below, or after leaving the switch for five minutes or longer at room temperature. Do not use ultrasonic cleaning. /PC Hole LayoutsAP PC/ Type Mounting Without Bracket /When optional Bracket is used. 140000640314 or 140000640316 140000640315 or 140000640317 140000640318 AP-H 1 pole AP-H 2 2 /Right-angle Terminal Type Terminal 0.2 0.2inch pitch 0.3 0.3inch pitch 1 pole 2
APH /Square type /SPST/SPDT PC 2/DPST/DPDT PC BC 2 Terminal pin No.2 is not available in switches with Function B and C. 2 LM 2 5 Terminal pins No.2 and 5 are not available in switches with Function L and M. AP1B2HZ ON OFF 13 AP1C2HZ OFF ON 13 AP1F2HZ ON ON 23 21 AP2L2HZ ON OFF 13 46 AP2M2HZ OFF ON 13 46 AP2R2HZ ON ON 23 56 21 54 /Standard Accessories /Sold separately APH Color Button for APH series Color White Red Black Gray Green Blue Orange Yellow Brown 140000470198 140000470200 140000470199 140000470204 140000470202 140000470203 140000470205 140000470201 140000470206 91 A Color Button is supplied with the switch. Please select from the above 9 part numbers. /Optional AccessoriesAP /Part name /Optional Accessories1 10(10pcs./pack) AP / Sold separately APMMAPS Color Cap for APMM & APS series /Bracket Color /Poles /Single pole 2/Double poles White Red Black Gray Green Blue Orange Yellow Brown 140000481402 140000481404 140000481403 140000481408 140000481406 140000481407 140000481414 140000481405 140000481409 /Sold separately /Box size 5 mm 5 mm 7.5 mm 7.5 mm 5 mm /Type -MAP-H AP-H-M -M / 140000640314 140000640316 140000640315 140000640317 140000640318 ONOFF ON.OFFMomentary. Optional Accessories. Made to order products.