Xitanium LED driver Datasheet Xitanium Linear n-isolated LED drivers Single urrent Xitanium non-isolated LED drivers with single current output offer industry leading performance and reliability at optimized cost. Available in various slim, low-profile form factors, they are ideal for high volume applications where performance specification is also very key. These drivers guarantee OEMs Xitanium performance and Philips dependability for standard current applications. enefits Attractive initial cost and a high energy efficiency allowing for interesting payback Easy design in no additional heat sink needed Good light quality A reliable linear LED system with a 3-year guarantee Features Application A 2-foot linear LED module with 1 row of LEDs (1R) Office and 1550 or 1100Lm output (depending on driver Supermarkets used) Industry RI >80 and 3.5 SDM Uses standard WAGO connectors 35,000-hour lifetime
Electrical input data minal input voltage 220...240 Vac performance range minal input frequency 50...60 Hz minal input current 0.18 A Input voltage 230 Vac minal input power 36 W Power factor 0.9 Total harmonic distortion 20 @ full load. See graph. Efficiency 87 @230V @ full load minal input voltage D 186...250 Vdc Input voltage A 202...254 Vac Operational range Input frequency A 47.5...63 Hz Maximum permissible range Input voltage D 168...275 Vdc Maximum permissible range Regulation method onstant urrent Output voltage 64...76 Vdc Output voltage max. 250 V Peak voltage at open load Output current 0.4 A Full output current setting Output current tolerance ±5 Output current ripple LF 20 Ripple = peak / average Output power 25.6...30 W Full output ontrol method Fixed @230V @ full load @230V @ full load @ full load. See graph. Electrical output data Electrical data controls input Logistical data Product name Order code Logistic code 12N 9290 008 30600 EAN3 Pieces per box 2/7
Wiring & onnections Input wire cross-section 0.5...1.5 2 16...20 AWG Input wire strip length 8...9 Output wire cross-section 0.5...1.5 2 16...20 AWG Output wire strip length 8...9 Maximum cable length 240 Total length of wiring including LED module, one way Dimensions and weight Length (A1) 280 Width (1) 30 Height (1) 22 Fixing hole diameter (D1) 4.1 Fixing hole distance (A2) 265 Weight 200 gram Operational temperatures and humidity Ambient temperature -20...+50 Higher ambient temperature allowed as long as Tcase-max is not Tcase-max 75 Maximum temperature measured at Tc-point Tcase-life 65 Measured at Tc-point Maximum housing temperature 110 In case of a failure Relative humidity 10...90 n-condensing Ambient temperature -25...+85 Relative humidity 5...95 exceeded. Storage temperature and humidity 3/7 n-condensing
Lifetime Driver lifetime 50,000 hours Measured temperature at Tc-point is Tcase-life. Maximum failures = 10 Prograable features Remark Set output current (AO) See Design-in guide. Default output current: 400 ma LED module temperature derating (MTP) onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) orridor mode Energy metering Diagnostics Remark Features Open load protection Yes Automatic recovering Short circuit protection Automatic recovering Over power protection Automatic recovering Hot wiring Suitable for fixtures with protection class I per IE60598 ertificates and standards Approval marks E / ENE Ingress Protection classification 20 Inrush current Inrush current Ipeak 20 A Input voltage 230V Inrush current Twidth 250 µs Input voltage 230V, measured at 50 Ipeak Drivers / M 16A type 24 pcs 4/7 M Rating Relative number of LED drivers 10A 63 13A 81 16A 100 (stated in datasheet) 20A 125 25A 156 10A 104 13A 135 16A 170 20A 208 25A 260
Driver touch current Typical touch current 0.7 ma peak Acc. IE61347-1. LED module contribution not included Mains surge iunity (diff. mode) 1 kv Acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 2 kv Acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us Advised NT type Vishay 15kOhm±2NT 238161554153 Surge iunity Module Temperature Protection Murata NP15XW153E03R NP15XW153E03R With 390Ω in series NT resistance threshold 2966 Ω Start limiting output current orresponding temperature 70 With advised type 238161554153 NT resistance versus output current 5/7
Graphs Operating window Power factor versus output power Efficiency versus output power 6/7
2015 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Data subject to change. Date of release: September 1, 2015 www.philips.com/technology