V7000 Dual Core Vehicle WIFI Router Dual Band WIFI 2.4GHz + 5GHz Speed up to 1167Mbps Support 60 clients connection VPN PPTP, L2TP, IPSEC, GRE Hardware and Software Watchdog 12V-24VDC Power Input, Wide Range 9 ~ 36V Support Multiple 4G LTE FDD, LTE TDD Cellular Bands Support High Speed Data Storage SSD (optional) Support GPS Tracking and Cloud Management Platform (optional)
Introduction ComIn V7000 is a high performance 32bit Dual Core Vehicle WIFI Router for bus and portable industrial applications which requires multiple client connection, high speed high capacity SSD storage and GPS tracking/monitoring with cloud platform(optional). It has rich features geared with an industrial grade 4G module that support multiple 4G FDD/TDD bands, dual-frequency 2.4Ghz and 5Ghz WIFI, dual high speed Gigabit Ethernet port, one SD card slot, one USB Host Port, and one high speed SSD connector. ComIn V7000 is the ideal 4G vehicle router suitable for smart transport applications and portable industrial applications. Features Industrial Design ComIn V7000 is a high performance router based on industrial 32bit MIPS Dual-core network processor and with 512MB system RAM which unleashing its network processing performance. It has dual WIFI band 2.4GHz and 5GHz allows wireless data transfer rate up to 1167Mbps and support MIMO. It supports low power mode such as hibernation mode, schedule online-offline mode, and timed on-off mode (available for special version). ComIn V7000 is a rugged device built with IP30 protection rating metal casing, ideally suitable for vehicle and industrial working environments. In addition, the power system of the ComIn V7000 accepts wide input power range from 9V to 36V and has power surge protection. The installation to those vehicle provide power source 12V and/or 24V is very straight forward either use standard DC power jack or 3Pin aviation connector. Stability and Robustness ComIn V7000 is available with hardware and software watchdog to maintain the stability of the device. It can keep having long operation hours without human interference. The system has failsafe features which take care the WAN/4G connection, improve the uplink connection and prevent lost in communication. The Gigabit Ethernet ports built-in 1.5KV magnetic isolation protection, SIM holder built in 15KV ESD protection, reverse-voltage and surge protection in power input as well as lightning protection (optional) in the antenna connectors.
User Friendliness ComIn V7000 deliveries rich set of 4G LTE bands which cover most common bands currently in operation in one region. It is also downward compatible with TD-SCDMA, WCDMA, EVDO 3G cellular networks where 4G service is unavailable or temporarily out of service. It serves one standard SIM card holder. Just take a simple 4G configuration one time, then the device will handle connection and communication automatically. ComIn V7000 supports common local or remote WEB / CLI configuration and cloud management platform for many devices (optional). The cloud management platform is a powerful online service which offer wireless management, user management, captive portal management, GPS tracking and etc. Product Specifications Hardware Specifications CPU 32bit MIPS Dual Core Industrial Network Processor System Memory 512MB DDR2 RAM Flash 16MB SPI Flash 2.4GHz 802.11n MIMO up to 300Mbps Wireless 5GHz 802.11ac MIMO up to 867Mbps 5dBi Detachable External High Gain WIFI Antennas WAN 1 x 10/100/1000Mbps Gigabit Ethernet Port, auto MDI/X, with 1.5KV magnetic isolation protection LAN 1 x 10/100/1000Mbps Gigabit Ethernet Port, auto MDI/X, with 1.5KV magnetic isolation protection SIM 1 x Drawer-Type SIM Card Holder, Standard 1.8V/3V SIM/UIM, 15KV ESD Protection Interfaces SD 1 x SD Card Slot for Local Storage Expansion Power Standard DC Power Input Jack,reverse-voltage protection and surge protection 3Pin Aviation Connector (Alternative) Antenna 4 x WIFI Standard SMA Antenna Port, 50 ohm 1 x 4G Standard SMA Antenna Port, 50 ohm 1 x GPS Standard SMA Antenna Port, 50 ohm Storage Support 64GB~512GB SSD (Optional)
RESET Indicators Power Input Enclosure Dimensions Weight Environment Certification 1 x Factory Reset Button SYS LED Indicator x 1 SIGNAL LED Indicator x 1 WIFI LED Indicator x 2 LAN LED Indicator x 1 WAN LED Indicator x 1 GPS LED Indicator x 1 12VDC/2A via Power Jack or 3Pin Aviation Power Type Connector Power Range 9~36VDC Power Consumption <2A (12V) Metal Casing, IP30 Rating protection 191.5mm x 144mm x 40mm (Exclude Antenna and mounting sets) 920g Operating Temperature: -20 C to 70 C Storage Temperature: -40 C to 85 C Operating Humidity: 10% to 95% RH Non-condensing Storage Humidity: 5% to 95% RH Non-condensing RoHS Compliance Wireless Specifications Standards IEEE 802.11b/g/n and IEEE 802.11a/n/ac Frequencies 802.11b/g/n 2.412 2.4835GHz 802.11a/ac 5.180-5.825GHz 2.4GHz 1 13 Channel Selection Functions 5GHz 36 165 Channel Selection Band Bandwidth 20MHz / 40MHz / 80MHz IEEE 802.11b 11M 2.4G: 20±2dBm IEEE 802.11g 6M 2.4G: 20±2dBm 54M 2.4G: 15±2dBm RF Output Power 2.4GHz HT20-MCS0: 20±2dBm IEEE 802.11n HT20-MCS7: 15±2dBm HT40-MCS0: 20±2dBm HT40-MCS7: 15±2dBm
Reception Sensitivity Wireless Security IEEE 802.11a 6M 5G: 18±2dBm 54M 5G: 15±2dBm IEEE 802.11n HT20-MCS0: 20±2dBm HT20-MCS7: 13±2dBm HT40-MCS0: 18±2dBm HT40-MCS7: 12±2dBm 5GHz IEEE 802.11ac HT20-MCS0: 18±2dBm HT20-MCS7: 12±2dBm HT40-MCS0: 18±2dBm HT40-MCS9: 11±2dBm HT80-MCS0: 18±2dBm HT80-MCS9: 10±2dBm 1M 2.4G: -87±2dBm IEEE 802.11b 11M 2.4G: -82±2dBm 6M 2.4G: -83±2dBm IEEE 802.11g 54M 2.4G: -70±2dBm 2.4GHz HT20-MCS0: -84±2dBm HT20-MCS7: -65±2dBm IEEE 802.11n HT40-MCS0: -80±2dBm HT40-MCS7: -62±2dBm 6M 5G: -96±2dBm IEEE 802.11a 54M 5G: -84±2dBm HT20-MCS0: -95±2dBm HT20-MCS7: -77±2dBm IEEE 802.11n HT40-MCS0: -92±2dBm HT40-MCS7: -77±2dBm 5GHz HT20-MCS0: -94±2dBm HT20-MCS7: -70±2dBm HT40-MCS0: -91±2dBm IEEE 802.11ac HT40-MCS9: -65±2dBm HT80-MCS0: -90±2dBm HT80-MCS9: -61±2dBm WEP/WPA/WPA2 Protected Encryption
4G Specifications 4G Cellular Features Cellular Bands Data Rate Output Power Sensitivity 3G 2G FDD LTE 4G TDD LTE TD-SDCMA UMTS EVDO CDMA1x GSM/GPRS/EDGE LTE FDD LTE TDD TD-SCDMA DC-HSPA+ HSPA+ WCDMA 1xEVDO EDGE GPRS <24dBm <-109dBm FDD LTE, TD LTE TD-SCDMA/TD-HSPA WCDMA/HSPA/HSPA+/DC-HSPA+ CDMA2000 EVDO RevA, RevB CDMA1x, GPRS, EDGE B1, B2,B3, B4, B5, B7, B8, B12, B13, B17,B19, B20, B21, B25, B31 B38, B39, B40, B41 2010~2025MHz / 1880~1920MHz 2100MHz or 850/1900/2100MHz or 850/ 900/1900/2100MHz/AWS 800/1900MHz or 450MHz (optional) 800/1900MHz or 450MHz (optional) 900/1800MHz Dual Band or 850/900/1800/1900MHz Quad Band DL 100Mbps / UL 50Mbps DL 150Mbps / UL 50Mbps DL 2.8Mbps / UL 2.2Mbps DL 42Mbps / UL 5.76Mbps DL 21Mbps / UL 5.76Mbps DL 384Kbps / UL 384Kbps DL 14.4Mbps / UL 5.7Mbps DL 237kbps / UL 118kbps DL 85.6kbps / UL 42.8kbps Software Functions WAN Static IP, DHCP, L2TP, PPTP, PPPoE, 3G/HSPA/4G Client, AP, Router and other working modes WIFI Main Features Support WPA/WPA2 Encryption, MAC Filter and others VPN PPTP / L2TP / IPSec / GRE Management SYSLOG / SNMP / TELNET / HTTP Functions
Support Local or Remote Firmware Upgrade, Import / Export configuration file Support APN/VPDN Support NTP Support VLAN, MAC Address Clone Support DHCP Server, DHCP Client, DHCP and MAC Address Binding, DDNS, Firewall, DMZ,Traffic Statistics and others Support TCP/IP, UDP, FTP(optional), HTTP and other network protocols Support GPS Tracking Function(optional)
Product Dimensions
To see the full line of MovingComm products, Visit www.movingcomm.com/en INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH MOVINGCOMM PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN MOVINGCOMM S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, MOVINGCOMM ASSUMES NO LIABILITY WHATSOEVER, AND MOVINGCOMM DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF MOVINGCOMM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS OTHERWISE AGREED IN WRITING BY MOVINGCOMM, THE MOVINGCOMM PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE MOVINGCOMM PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR. MovingComm may make changes to specifications and product descriptions at any time, without notice. Buyers must receive a confirmation from MovingComm prior using the product. MovingComm shall have no responsibility whatever for conflicts or incompatibilities arising from future changes to them. Copyright 2017 Shenzhen MovingComm Technology. All rights reserved. SHENZHEN MOVINGCOMM TECHNOLOGY CO., LTD. Office: 2F, Building D, JinYiLai Industrial Park, LiuXianDong Industrial Zone, XiLi Town, NanShan District, Shenzhen. 518055, P.R. China Tel: 86-755-23125215 Ext 999, 86-131-68045675 Fax: 86-755-23125215 Ext 802 Email: marketing@movingcomm.com