Server Usage & Third-Party Viewers

Table of Contents HiPER LOOK Server Introduction... 2 Google Earth... 2 Installation...2 Using with HiPER LOOK Server...2 Troubleshooting...6 ESRI ArcMap... 7 Installation...7 Using with HiPER LOOK (WMS) Server...7 Using with HiPER LOOK (WMTS) Server... 15 Using with HiPER LOOK (WCS) Server... 19 ArcGIS Online... 25 Installation... 25 Using with HiPER LOOK (WMS) Server... 25 Image Analysis in ArcMap... 26 Export Map Data... 29 View Exported Data with Arc Scene... 33 Troubleshooting... 37 Quick Terrain Reader WCS Export... 38 Installation... 38 View Exported Data... 38 QGIS... 40 Installation... 40 Using with HiPER LOOK WMTS Server... 40 Using with HiPER LOOK WMS Server... 44 Using with HiPER LOOK WCS Server... 50 Troubleshooting... 53 Gaia... 54 Installation... 54 Using with HiPER LOOK Server... 54 Troubleshooting... 58

Definitions of Terms EPSG GSD Mapfile MBR MGRS NUI Shapefile WMS European Petroleum Survey Group: Spatial reference codes used to denote varying geographic coordinate systems. Ground Sample Distance: The physical size of a pixel on the earth s surface (for example, a GSD of 1 meter means that a pixel covers 1 meter on the ground). A file format containing WMS layer information for use with PIXIA Corp. s HiPER LOOK Server. Minimum Bounding Rectangle: The minimum bounds needed to encompass all imagery within a NUI file. Military Grid Reference System: A coordinate system used by NATO militaries. New Universal Image : A single large file formed from a collection of many smaller source image files that are geospatially compatible. A file format containing vector-based geographic data. The format consists of a collection of interdependent files. Web Mapping Service: The format consists of either NUI files (imagery data) or shapefiles. These can be layered for viewing. PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 1

HiPER LOOK Server Introduction The HiPER LOOK Server allows users to access data within NUI containers via the standard web mapping service (WMS) and web map tile service (WMTS) interfaces. In addition to HiPER LOOK Viewer, which is a thin client that comes packaged with each HiPER LOOK Server installation, users can employ a variety of third-party viewers that support WMS and WMTS to view data served by the HiPER LOOK Server. This guide outlines how to configure the HiPER LOOK WMS and WMTS in a few common third-party clients such as Google Earth, Esri ArcMap, QGIS and GIA. Google Earth Installation Download and use the provided installer at http://www.google.com/earth/index.html. Using with HiPER LOOK Server 1. Start Google Earth. 2. Navigate to the desired location on the globe that corresponds to the layer data. Figure 1: Google Earth PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 2

3. Click the Add Image Overlay icon in the toolbar. Figure 2: Add Image Overlay 4. The New Image Overlay dialog will open. In the Name field, input a name for the overlay (e.g. HiPER LOOK Server). Figure 3: Name the Overlay 5. Click the Refresh tab. Then select the WMS Parameters button. Figure 4: New Image Overlay PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 3

6. Click Add in the Web Mapping Service Parameters dialog box. Figure 5: Web Mapping Service Parameters 7. Type in the WMS URL: a. The HiPER LOOK server (i.e. http://[ip address of server]/wmsserver/) b. If you want a different map, add the map name for eg. http://[ip address of server]/wmsserver/?map=default.map Note: WMS Overlay does not work when Baisc Auth is enabled. Figure 6: Enter WMS Server URL PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 4

8. Click OK. A listing of available layers should appear in the Transparent Layers box. Select the desired layer(s) from the list and click on Add ->. Figure 7: Web Mapping Service Parameters 9. Click Apply and then OK to save the changes and close the dialog. 10. Click OK again to close the New Image Overlay dialog. 11. The data should appear as a tile layer overlaid on the globe. 12. When zooming, right click on the layer in the pane and click Refresh to update the tile. PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 5

Figure 8: Refresh the Layer 13. Repeat the above steps to add as many layers as desired. Troubleshooting Consult Google Earth documentation for further usage information and troubleshooting. PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 6

ESRI ArcMap Installation Consult the appropriate ESRI ArcGIS documentation for proper installation and configuration of ArcMap. Using with HiPER LOOK (WMS) Server 1. Open ArcMap. 2. Click on the Add Data icon in the toolbar. Figure 9: ESRI ArcMap Figure 10: Add Data icon 3. Select GIS Servers from the Look in: drop-down list. Figure 11: Add Data: GIS Servers PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 7

4. Select Add WMS Server and click Add. Figure 12: Add Data: Add WMS Server 5. Copy the HiPER LOOK Server URL for: a. No LIDAR download: Manually Type in the URL from the of the HiPER LOOK server (i.e. http://[ip address of server]/wmsserver/) or paste in the URL from the Show capabilities tab in the Web Viewer. b. With LIDAR download (feature info): Click on the button in the Web viewer, copy the WMS Capabilities URL. PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 8

7. Click Add in the Add Data dialog. 8. Select your desired map and click Add. Figure 15: Add WMS Server Figure 16: Add the Layers tree PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 10

The available layers should appear in the Layers tree in the left-hand pane. Figure 17: WMS Layers 9. To get the geographic features for the intersecting point on the map: a. Click the button on the menu bar. b. Place the mouse cursor over the Map Viewport; click a point on the Map to display the Feature Information list. c. Click on the file link PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 11

d. Click the Open or Save button to open or save the file. e. Alternately all the files can be downloaded as a.zip file by clicking the Download All link. 10. To change the co-ordinate system of the map: a. Right click on the root map (OGC:WMS) and click on Change Coordinate System Figure 18: Change the coordinate system of the root map PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 12

b. In the Change Co-ordinate System dialogue box click on the dropdown box and select the coordinate system. Figure 19: Select a different co-ordinate system c. Click on the OK button to close the Change Co-ordinate System dialogue box Figure 20: Change the coordinate system d. In the Warning dialogue box click both the checkboxes, then click Yes Figure 21: Different coordinate system warning dialogue box PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 13

Figure 22: Map is projected in a different coordinate system Figure 23: Zoom into the map new projection system Figure 24: Original with the WGS-84 (EPSG-4326) projection PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 14

Using with HiPER LOOK (WMTS) Server 1. Open ArcMap. 2. Click on the Add Data icon in the toolbar Figure 25 ESRI ArcMap 3. Select GIS Servers from the Look in: drop-down list. Figure 25 Add Data icon Figure 26 - Add Data: GIS Servers PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 15

4. Select Add WMTS Server and click Add. Figure 27 - Add Data: Add WMTS Server 5. Type in the URL of the HiPER LOOK server (i.e. http://[ip address of server]/wmtsserver/). Or if you know the name of the map add?map=<name of map> at the end of the URL 6. Click Get Layers. Figure 28 - Add WMTS Server URL Figure 29 Get Layers PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 16

7. Click OK to close the Add WMTS Server dialog. 8. Double-click your desired map on the specified WMTS server Figure 30 Open the HiperMap map 9. Select HiperMap (or name of the map) and click the Add button Figure 31 Add the HiperMap map PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 17

10. The available layers should appear in the Layers tree in the left-hand pane. Figure 32 Add the Layers tree 11. Double click the HiperMap layer and navigate to the WMTS tab. Change the Tiling Scheme to OGS: 4326. Click OK Figure 33 Layer Properties PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 18

Using with HiPER LOOK (WCS) Server 1. Open ArcMap Figure 34 HiperMap Layer added 2. Click on the Add Data icon in the toolbar. Figure 35: ESRI ArcMap Figure 36: Add Data icon PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 19

3. Select GIS Servers from the Look in: drop-down list. 4. Select Add WCS Server and click Add. Figure 37: Add Data: GIS Servers Figure 38: Add Data: Add WCS Server PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 20

5. Type in the URL of the HiPER LOOK server (i.e. http://[ip address of server]/wcsserver/). Or if you know the name of the map add?map=<name of map> at the end of the URL 6. Click Get Coverages. Figure 39: Add WCS Server URL Figure 40: Get Coverages 7. Select the root layer (HiperMap). Click OK to close the Add WCS Server dialog Figure 41: Close the Add WCS Server PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 21

8. Double Click the HiPER LOOK Map to add in the Add Data dialog. Figure 42: Add WCS Server 9. Click Add again to add the layer Figure 43: Add WCS Layer PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 22

10. The available layers should appear in the Layers tree in the left-hand pane. Figure 44: Add the Layers tree 11. Right-click the added layer to open up the properties dialogue box: 1. Check the Use Hillshade effect box 2. Change the Stretch type to Standard Deviations Figure 45: Layer properties PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 23

12. Layer after the Property changes are applied 13. To add more than one layer : 1. Add the first layer by following steps 1-12. Figure 46: Properties applied Figure 47: Add more layers PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 24

2. Add the second layer by following steps 1-10 3. ArcMap when 2 layers are added ArcGIS Online Figure 48: added 2 layers Installation No installation is required for ArcGIS Online. The user needs to have an ESRI ArcGIS online account they can sign into. The map has to be published in the Web Mercator (EPSG 3857) projection coordinate system to work in ArcGIS Online. Using with HiPER LOOK (WMS) Server 1. Click on the Add the button Figure 49: add a WMS Server 2. Click on Add layer from Web in the dropdown box 3. In the Add Layer from Web dialogue box a. Select the A WMS OGC Web Service from the drop down box PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 25

b. Enter a wmsserver URL that is accessible from the internet. c. Click on the ADD LAYER button Figure 50: WMS Layer is added Image Analysis in ArcMap The Image Analysis window supports the analysis and exploitation of image and raster data in ArcMap with a collection of commonly used display capabilities, processes, and measurement tools. This is a window that can be docked, for example, to the side of the application's window and either pinned open or allowed to retract to a tab along the side of the application windowclick on Windows and select Image Analysis from the dropdown list Figure 49: Clicking on Windows PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 26

Figure 50: Image Analysis 1. The Image Analysis tool has the following functions that can be utilized to enhance the quality of the imagery: 1.1. Display : The display section of the window contains the following tools to enhance the appearance of image and raster data: 1.1.1. Contrast 1.1.2. Brightness 1.1.3. transparency 1.1.4. Gamma 1.2. Processing: The Image Analysis window's Processing section simplifies the experience of applying complex processing and analysis techniques to layers of image and raster data in ArcMap. The tools provide one-click options to apply processes, such as 1.2.1. Clipping, 1.2.2. Normalized difference vegetation index (NDVI) creation, 1.2.3. Mosaicking 1.2.4. Exporting. 1.3. Mensuration The Mensuration panel contains tools to measure point, distance, angle, height, perimeter, and area from an image (raster dataset or mosaic dataset) with sensor information (or geodata transformation). Height can be measured along an object, its shadow, or both. You can also use a DEM to make a measurement along a surface rather than the projected surface. Click on the Image Analysis options icon for more imagery enhancing options PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 27

Figure 51: Mensuration panel 1.4. Normalized difference vegetation index (NDVI) 1.5. Pan Sharpen 1.6. Orthorectify 1.7. Hillshade 1.8. Stretch Consult ArcMap documentation for further usage information and troubleshooting PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 28

3. Click Yes (or No) in the output Raster dialogue box (depends on whether you want the exported data to appear in the layer panel) 1. Click Yes 2. NAIP-Denver.tif added to the layer panel Figure 46: Layer added PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 31

View Exported Data with Arc Scene 1. Open ArcScene 2. Click on the Add Data icon in the toolbar. Figure 47:Open ArcScene 3. Click on the.tif file that you want to add Figure 48: Add data Figure 49: add.tif file PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 33

4. The NAIP layer is added in ArcScene 5. Click on the Add Data icon again and add a second layer (Denver.tif), which is below the NAIP-Denver layer (see screen shot below with NAIP-Denver.tif unchecked) Figure 50: Add second layer PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 34

If you uncheck the NAIP-Denver layer, the Denver layer shows up Figure 51: Dem data layer 6. Uncheck the Denver.tif layer and check the NAIP-Denver.tif layer 7. Right click on the NAIP-Denver.tif file and click Properties Figure 52: layer properties PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 35

8. In the Properties dialogue box - Base Heights tab click the Floating on a custom surface radio button 9. Browse to the folder where the Denver.tif was saved, Click Apply then Ok to close the Layer Properties dialogue box Figure 53: Layer Properties PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 36

10. The 3D image is available in ArcScene Figure 54: 3-D image in Arc Scene Troubleshooting Consult ArcMap documentation for further usage information and troubleshooting. PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 37

Quick Terrain Reader WCS Export Installation Download and use the provided installer at http://appliedimagery.com/download View Exported Data 1. Start Quick Terrain Reader 2. Click on File/ Open Model(s) Figure 55: Quick Terrain Reader PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 38

QGIS Installation Download and use the provided installer at http://www.qgis.org/en/site/forusers/download.html Using with HiPER LOOK WMTS Server 1. Start QGIS Desktop 2.8.1. Figure 58 Start QGIS Application 2. Click on Layer->Add Layer->Add WMS/WMTS Layer Figure 59 Add WM(T)S Layer PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 40

3. Click on the New button Figure 60: Add a New Layer 4. In the Create a new WMS connection box type in the following Name: Layer name, URL : URL of the HiPER LOOK server (i.e. http://[ip address of server]/wmtsserver/). Or if you know the name of the map add?map=<name of map> at the end of the URL 5. Click OK to close the Create a new WMS connection dialogue box Figure 61: Close the WMS connection PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 41

6. Click Connect Figure 62: Connect to the WMTS Server 7. Click the desired layer (for eg. HiperMap) and click Add to add the layer Figure 63 Add the HiperMap Layer PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 42

8. Click Close to close the Add Layer from a WM(T)S Server 9. The HiperMap layer is added as the QGIS layer Figure 64 Close the Add Layer from a WM(T)S Server Figure 65: HiperMap added to the QGIS Layer PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 43

Using with HiPER LOOK WMS Server 1. Start QGIS Desktop 2.8.1. Figure 66: Start QGIS Application 2. Click on Layer/Add Layer/Add WMS/WMTS Layer Figure 67: Add WMS/WMTS Layer PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 44

3. Click on the New button Figure 68: Add a New Layer 4. In the Create a new WMS connection box type in the following Name: Layer name, URL : URL of the HiPER LOOK server (i.e. http://[ip address of server]/wmsserver/), Or if you know the name of the map add?map=<name of map> at the end of the URL (i.e. http://[ip address of server]/wmsserver/?map=default.map). 5. Click OK to close the Create a new WMS connection dialogue box Figure 69: Close the WMS connection PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 45

6. Click Connect Figure 70: Connect to the WMS Server 7. Click the desired layer (i.e. HiperMap) and click Add to add the layer Figure 71: Add the HiperMap Layer PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 46

8. Click Close to close the Add Layer from a WM(T)S Server Figure 72: Close the Add Layer from a WM(T)S Server 9. The WMS layer is added in the Layers panel a. Layer is only in EPSG-4326 co-ordinate system Figure 73: HiperMap added to the QGIS Layer PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 47

b. Layer has more than one co-ordinate system Figure 74: Layer shown in the EPSG-4326 coordinate system i. Change the coordinate system by clicking on the ii. Click on the Enable on the fly CRS transformation checkbox Figure 75: Filter textbox is enabled PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 48

iii. In the Filter textbox type in the coordinate system (EPSG) code iv. Select the EPSG code and click on OK. Figure 76: Type the EPSG code in the Filter textbox Figure 77: Layer is now in the different EPSG coordinate system PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 49

Using with HiPER LOOK WCS Server 1. Start QGIS Desktop 2.8.1. 2. Click on Layer/Add Layer/Add WCS Layer Figure 78: Start QGIS Application Figure 79: Add WCS Layer PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 50

3. Click on the New button Figure 80: Add a New Layer 4. In the Create a new WCS connection box, type in the following Name: Layer name, URL: URL of the HiPER LOOK server (i.e. http://[ip address of server]/wcsserver/) Or if you know the name of the map add?map=<name of map> at the end of the URL (i.e. http://[ip address of server]/wcsserver/?map=default.map). 5. Click OK to close the Create a new WCS connection dialogue box Figure 81: Close the WMS connection PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 51

6. Click Connect Figure 82: Connect to the WCS Server 7. Click the desired layer (ie. world30) and click Add to add the layer 8. Repeat the above steps to add as many layers as desired. Figure 83: Add the WCS Layers 9. Click Close to close the Add Layer from a WCS Server PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 52

10. The world30 layer is added as a QGIS layer Figure 84: Close the Add Layer from a WCS Server 11. Repeat the above steps to add as many layers as desired. Figure 85: Layer added Troubleshooting Consult QGIS documentation for further usage information and troubleshooting. PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 53

Gaia Installation Download and the use the provided installer at http://carbonprojectstorage.blob.core.windows.net/downloads/gaia/3_4/gaia_install.exe Using with HiPER LOOK Server 1. Open Gaia. Figure 86: Gaia PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 54

2. Click the Add Layer to Map button in the top right corner of the Map Layers pane. Figure 87: Add Layer to Map 3. In the OGC Services section click the Add new service to the list button. Figure 88: Add new service to the list PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 55

4. In the Add an OGC Service to the List dialog, type HiPER LOOK Server in the Name field. 5. Next, input the URL to the HiPER LOOK server (i.e. http://[ip address of server]/wmsserver/?) in the URL field. 6. Select WMS as the Service Type. 7. Select Version 1.1.1. 8. Type in a Description if desired. 9. Provide the appropriate credentials in the Authentication section if necessary. Figure 89: Add an OGC Service to the List PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 56

10. Click OK to close the Add an OGC Service to the List dialog a list of the available layers should appear in the box at the center-left. Figure 90: Preview 11. Click on a layer in the list and then click Add Layer to add that layer to the Map Layers pane. Figure 91: Add Layer PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 57

12. Add as many layers as desired. 13. Click OK to close the Add Layer to Map dialog. Figure 92: Map Layers Troubleshooting Consult Gaia documentation for further usage information and troubleshooting. PIXIA Corp. Copyright 2015 PIXIA Corp. All rights reserved. Page 58